Noise Levels in 11096, NY | Find Quiet Neighborhoods With Our Sound Map
60 dBA
Average noise across 11096
Normal conversation an arm’s length away
6,173
Residents above the EPA 55 dBA threshold
85% of 11096 residents
93 dBA
Loudest residential point
Power saw
This map shows modeled outdoor noise across 11096 at 100-meter resolution, combining road, aviation, and rail sources. Green areas measure below 45 dBA. Orange and red exceed the EPA's 55 dBA outdoor threshold linked to long-term health effects. Use the layer toggles to view each source on its own or all together.
Overall
Road
Rail
Aviation
Click the map to explore
35 dBa55 dBa (EPA limit)90+ dBa
3545557090
Quietest (dBA)Loudest
Colorblind friendlyoff
What the numbers sound like
30 dBAWhisper
40 dBASoft rainfall
45 dBAQuiet suburban street at night
50 dBAQuiet office
55 dBAEPA outdoor threshold: light traffic 100 ft away
60 dBANormal conversation an arm's length away
65 dBABusy restaurant
70 dBAHighway traffic 50 ft away
80 dBACity bus interior
Population Above the EPA Outdoor Threshold
The EPA's 55 dBA outdoor reference level is a common benchmark for residential noise exposure, especially for activity interference, annoyance, and long-term community noise concerns. About 6,173 11096 residents, or 85.4%, live above that level. By land area, 78.7% of 11096 is above 55 dBA.
Average noise levels for 11096 residents, grouped by direction from the center of 11096. Eastern 11096 carries the highest population-weighted average; Western 11096 carries the lowest. Just 62% of residents in Western 11096 live in blocks above the EPA's 55 dBA threshold, about two-thirds of the share in Eastern 11096.
Central 11096
59.9 dBA · Loud
Normal conversation an arm’s length away
97% of people above 55 dBA
QuietLoud
Eastern 11096
62.9 dBA · Loud
Busy restaurant
100% of people above 55 dBA
QuietLoud
Northern 11096
59.1 dBA · Loud
Normal conversation an arm’s length away
92% of people above 55 dBA
QuietLoud
Southern 11096
58.4 dBA · Loud
Normal conversation an arm’s length away
56% of people above 55 dBA
QuietLoud
Western 11096
56.9 dBA · Moderate-loud
Normal conversation an arm’s length away
62% of people above 55 dBA
QuietLoud
Eastern 11096 sounds about 52% louder than Western 11096 to the human ear, a 6.0 dBA gap. Every 10 dBA roughly doubles perceived loudness. Within any of these directions, two homes a quarter mile apart can still differ by 10 or more dBA depending on how close they sit to a major highway.
How far back from do you need to be?
produces an estimated 93 dBA at its loudest centerline points. Noise drops logarithmically with distance, with the exact rate depending on what's between you and the road. Tree cover, walls, terrain, and pavement type all matter. At roughly a quarter mile back, traffic fades into the noise level of a normal conversation an arm’s length away.
At source
93 dBA
Power saw
165 ft
80 dBA
City bus interior
330 ft
72 dBA
City bus interior
660 ft
64 dBA
Busy restaurant
¼ mile
57 dBA
Normal conversation an arm’s length away
½ mile
49 dBA
Quiet office
Calculated from the model's calibrated attenuation formula. About 11% of 11096 sits under tree canopy (lighter than most zip codes) and roughly 64% is impervious surface like pavement and rooftops. Both are folded into the per-place decay rate above. Heavier canopy pulls noise down faster with distance; impervious surfaces slow the drop.
-->
Rail Noise
Active freight rail runs through parts of 11096. For most blocks the rail-only contribution is small. Combined road-plus-rail noise rarely exceeds road noise on its own. The exceptions are the handful of blocks within roughly a quarter mile of the right-of-way during pass-through hours.
Use the Rail toggle on the map above to isolate rail's contribution from road and aviation.
Airport Noise
John F Kennedy International (JFK) sits northwest of 11096. The U.S. Department of Transportation measures aviation noise around this airport directly, and the model uses those federal measurements rather than synthetic predictions.
Blocks under the approach and departure paths carry combined road-plus-aviation noise, with some exceeding 65 dBA on the map's Overall layer. Blocks on the opposite side of 11096, particularly to the southeast, show no measurable aviation contribution. Use the Aviation toggle on the map above to isolate the airport's footprint.
How Noise Is Distributed Across 11096
The bar chart below shows the share of 11096 residents in each noise band. About 9% of residents live below the EPA's 55 dBA threshold, and roughly 38% live in blocks above 60 dBA. Long-term exposure in that range is linked to elevated stress hormones and cardiovascular risk.
How 11096 Compares
11096 sits at the louder end of the spectrum. Below: how 11096's average outdoor noise and share of residents above the EPA threshold compare with 11516, 11559, 11557, and 11565.
Average noise level (dBA)
11096's 59.8 dBA pop-weighted average is at the louder end of the spectrum. New York as a whole averages 55.4 dBA and the U.S. averages 52.0 dBA. Both are lower than 11096 because most of either area is rural land away from major roads.
Share of residents above 55 dBA
About 85.4% of 11096 residents live in blocks where outdoor levels exceed the EPA's 55 dBA threshold. That's in the middle of its peer group. Measured by land area instead, 78.7% of 11096's footprint sits above 55 dBA, against a New York average of 30.9% and a national average of 28.1%.
What This Means if You're Moving to 11096
Distance from highways matters more than the neighborhood name. Two homes in the same zip code can differ by 20 dBA if one sits 100 meters from and the other 500 meters away. The model captures this at 100-meter resolution, so noise exposure changes block by block.
Tree canopy can help reduce modeled noise exposure. Roughly 11% of 11096 is under tree cover (lighter than most zip codes), and the dominant land cover is medium-intensity developed land. Both are measured from federal USDA Forest Service and USGS satellite imagery at 30-meter resolution. Streets with 60% or higher canopy show 3 to 5 dBA lower noise than comparable streets with bare ground or pavement, which is why the per-place decay rate above already accounts for it.
Airport noise is directional. John F Kennedy International's approach paths concentrate aviation noise to the northwest. Neighborhoods to the southeast of downtown show no measurable contribution from the airport.
Sources & Methodology
The BestNeighborhood noise model is calibrated against nearly one million federal ground-truth measurements across four states. Road noise is computed from segment-level federal traffic data and propagated outward using physics-based acoustic decay, with attenuation rates that depend on the surrounding land cover.
All inputs are published federal datasets. Block-level noise is computed by combining road, rail, and aviation sound sources in the energy domain, the same physics used in professional environmental noise assessments. Read the full methodology.
