Noise Levels in 12950, NY | Find Quiet Neighborhoods With Our Sound Map

44 dBA
Average noise across 12950
Quiet suburban street at night
49
Residents above the EPA 55 dBA threshold
6% of 12950 residents
76 dBA
Loudest residential point
City bus interior

This map shows modeled outdoor noise across 12950 at 100-meter resolution, combining road, aviation, and rail sources. Green areas measure below 45 dBA. Orange and red exceed the EPA's 55 dBA outdoor threshold linked to long-term health effects. Use the layer toggles to view each source on its own or all together.

Overall
Road
Rail
Aviation
12950, NY Map of Noise Levels in 12950
Click the map to explore
35 45 55 70 90
Quietest (dBA) Loudest
Colorblind friendly off

What the numbers sound like

  • 30 dBAWhisper
  • 40 dBASoft rainfall
  • 45 dBAQuiet suburban street at night
  • 50 dBAQuiet office
  • 55 dBAEPA outdoor threshold: light traffic 100 ft away
  • 60 dBANormal conversation an arm's length away
  • 65 dBABusy restaurant
  • 70 dBAHighway traffic 50 ft away
  • 80 dBACity bus interior

Population Above the EPA Outdoor Threshold

The EPA's 55 dBA outdoor reference level is a common benchmark for residential noise exposure, especially for activity interference, annoyance, and long-term community noise concerns. About 49 12950 residents, or 6.1%, live above that level. By land area, 18.2% of 12950 is above 55 dBA.

See how noise in 12950 compares to similar-sized zip codes.

Noise by Part of 12950

Average noise levels for 12950 residents, grouped by direction from the center of 12950. Eastern 12950 carries the highest population-weighted average; Western 12950 carries the lowest. Just 0% of residents in Western 12950 live in blocks above the EPA's 55 dBA threshold, a fifth of the share in Eastern 12950.

Central 12950

43.6 dBA · Quiet
Quiet suburban street at night

11% of people above 55 dBA

QuietLoud

Eastern 12950

53.5 dBA · Moderate-loud
Quiet office to normal conversation

20% of people above 55 dBA

QuietLoud

Northern 12950

40.6 dBA · Quiet
Soft rainfall

1% of people above 55 dBA

QuietLoud

Southern 12950

41.3 dBA · Quiet
Quiet suburban street at night

2% of people above 55 dBA

QuietLoud

Western 12950

37.9 dBA · Quiet
Soft rainfall

0% of people above 55 dBA

QuietLoud

Eastern 12950 sounds about 195% louder than Western 12950 to the human ear, a 15.6 dBA gap. Every 10 dBA roughly doubles perceived loudness. Within any of these directions, two homes a quarter mile apart can still differ by 10 or more dBA depending on how close they sit to a major highway.

Loudest Road Corridors

The model evaluates every road in 12950 using federal traffic counts, posted speeds, heavy-truck ratios, and pavement type. The source level shown is the modeled noise at the road centerline, where it is loudest. Noise drops with distance, faster in vegetated areas and slower over open pavement.

RoadTypeAvg. source dBAPeak source dBA
Adirondack Northway Interstate 67.0 72
I-87 Local 60.5 62
Stowersville Rd Major collector 56.8 57

How far back from Adirondack Northway do you need to be?

Adirondack Northway produces an estimated 72 dBA at its loudest centerline points. Noise drops logarithmically with distance, with the exact rate depending on what's between you and the road. Tree cover, walls, terrain, and pavement type all matter. At roughly a quarter mile back, traffic fades into the noise level of a soft rainfall.

At source
72 dBA
City bus interior
165 ft
57 dBA
Normal conversation an arm’s length away
330 ft
49 dBA
Quiet office
660 ft
40 dBA
Soft rainfall
¼ mile
35 dBA
Soft rainfall
½ mile
35 dBA
Soft rainfall

Calculated from the model's calibrated attenuation formula. About 65% of 12950 sits under tree canopy (much heavier than most zip codes) and roughly 2% is impervious surface like pavement and rooftops. Both are folded into the per-place decay rate above. Heavier canopy pulls noise down faster with distance; impervious surfaces slow the drop.

How Noise Is Distributed Across 12950

The bar chart below shows the share of 12950 residents in each noise band. About 85% of residents live below the EPA's 55 dBA threshold, and roughly 7% live in blocks above 60 dBA. Long-term exposure in that range is linked to elevated stress hormones and cardiovascular risk.

How 12950 Compares

12950 sits at the louder end of the spectrum. Below: how 12950's average outdoor noise and share of residents above the EPA threshold compare with 12936, 12932, 12942, and 12998.

Average noise level (dBA)

12950's 43.7 dBA pop-weighted average is at the louder end of the spectrum. New York as a whole averages 55.4 dBA and the U.S. averages 52.0 dBA. Both are lower than 12950 because most of either area is rural land away from major roads.

Share of residents above 55 dBA

About 6.1% of 12950 residents live in blocks where outdoor levels exceed the EPA's 55 dBA threshold. That's in the middle of its peer group. Measured by land area instead, 18.2% of 12950's footprint sits above 55 dBA, against a New York average of 30.9% and a national average of 28.1%.

What This Means if You're Moving to 12950

  • Distance from highways matters more than the neighborhood name. Two homes in the same zip code can differ by 20 dBA if one sits 100 meters from Adirondack Northway and the other 500 meters away. The model captures this at 100-meter resolution, so noise exposure changes block by block.
  • Tree canopy can help reduce modeled noise exposure. Roughly 65% of 12950 is under tree cover (much heavier than most zip codes), and the dominant land cover is evergreen forest. Both are measured from federal USDA Forest Service and USGS satellite imagery at 30-meter resolution. Streets with 60% or higher canopy show 3 to 5 dBA lower noise than comparable streets with bare ground or pavement, which is why the per-place decay rate above already accounts for it.

Sources & Methodology

The BestNeighborhood noise model is calibrated against nearly one million federal ground-truth measurements across four states. Road noise is computed from segment-level federal traffic data and propagated outward using physics-based acoustic decay, with attenuation rates that depend on the surrounding land cover.

Federal datasets used:

FHWA Highway Performance Monitoring System: road geometry, traffic counts, lane configuration
U.S. DoT Bureau of Transportation Statistics National Transportation Noise Map: aviation and rail noise, road calibration ground truth
USGS / MRLC National Land Cover Database: land cover and impervious surface coverage
USDA Forest Service Tree Canopy Cover: vegetation density for sound propagation
U.S. Census Bureau TIGER/Line: block-level geography and population
U.S. EPA Levels Document: 55 dBA outdoor reference level

All inputs are published federal datasets. Block-level noise is computed by combining road, rail, and aviation sound sources in the energy domain, the same physics used in professional environmental noise assessments. Read the full methodology.