Noise Levels in 20006, DC | Find Quiet Neighborhoods With Our Sound Map
64 dBA
Average noise across 20006
Busy restaurant
2,242
Residents above the EPA 55 dBA threshold
99% of 20006 residents
73 dBA
Loudest residential point
City bus interior
This map shows modeled outdoor noise across 20006 at 100-meter resolution, combining road, aviation, and rail sources. Green areas measure below 45 dBA. Orange and red exceed the EPA's 55 dBA outdoor threshold linked to long-term health effects. Use the layer toggles to view each source on its own or all together.
Overall
Road
Rail
Aviation
Click the map to explore
35 dBa55 dBa (EPA limit)90+ dBa
3545557090
Quietest (dBA)Loudest
Colorblind friendlyoff
What the numbers sound like
30 dBAWhisper
40 dBASoft rainfall
45 dBAQuiet suburban street at night
50 dBAQuiet office
55 dBAEPA outdoor threshold: light traffic 100 ft away
60 dBANormal conversation an arm's length away
65 dBABusy restaurant
70 dBAHighway traffic 50 ft away
80 dBACity bus interior
Population Above the EPA Outdoor Threshold
The EPA's 55 dBA outdoor reference level is a common benchmark for residential noise exposure, especially for activity interference, annoyance, and long-term community noise concerns. About 2,242 20006 residents, or 99.1%, live above that level. By land area, 93.3% of 20006 is above 55 dBA.
Average noise levels for 20006 residents, grouped by direction from the center of 20006. Central 20006 carries the highest population-weighted average; Southern 20006 carries the lowest. Just 29% of residents in Southern 20006 live in blocks above the EPA's 55 dBA threshold, a third of the share in Central 20006.
Central 20006
64.4 dBA · Loud
Busy restaurant
100% of people above 55 dBA
QuietLoud
Eastern 20006
55.9 dBA · Moderate-loud
Quiet office to normal conversation
24% of people above 55 dBA
QuietLoud
Northern 20006
62.0 dBA · Loud
Busy restaurant
100% of people above 55 dBA
QuietLoud
Southern 20006
55.8 dBA · Moderate-loud
Quiet office to normal conversation
29% of people above 55 dBA
QuietLoud
Central 20006 sounds about 82% louder than Southern 20006 to the human ear, a 8.6 dBA gap. Every 10 dBA roughly doubles perceived loudness. Within any of these directions, two homes a quarter mile apart can still differ by 10 or more dBA depending on how close they sit to a major highway.
How far back from do you need to be?
produces an estimated 73 dBA at its loudest centerline points. Noise drops logarithmically with distance, with the exact rate depending on what's between you and the road. Tree cover, walls, terrain, and pavement type all matter. At roughly a quarter mile back, traffic fades into the noise level of a soft rainfall.
At source
73 dBA
City bus interior
165 ft
58 dBA
Normal conversation an arm’s length away
330 ft
50 dBA
Quiet office
660 ft
41 dBA
Quiet suburban street at night
¼ mile
35 dBA
Soft rainfall
½ mile
35 dBA
Soft rainfall
Calculated from the model's calibrated attenuation formula. About 0% of 20006 sits under tree canopy (much lighter than most zip codes) and roughly 86% is impervious surface like pavement and rooftops. Both are folded into the per-place decay rate above. Heavier canopy pulls noise down faster with distance; impervious surfaces slow the drop.
-->
Airport Noise
Ronald Reagan Washington Ntl (DCA) sits south of 20006. The U.S. Department of Transportation measures aviation noise around this airport directly, and the model uses those federal measurements rather than synthetic predictions.
Blocks under the approach and departure paths carry combined road-plus-aviation noise, with some exceeding 55 dBA on the map's Overall layer. Blocks on the opposite side of 20006, particularly to the north, show no measurable aviation contribution. Use the Aviation toggle on the map above to isolate the airport's footprint.
How Noise Is Distributed Across 20006
The bar chart below shows the share of 20006 residents in each noise band. About 0% of residents live below the EPA's 55 dBA threshold, and roughly 99% live in blocks above 60 dBA. Long-term exposure in that range is linked to elevated stress hormones and cardiovascular risk.
How 20006 Compares
20006 sits the highest among the peer group. Below: how 20006's average outdoor noise and share of residents above the EPA threshold compare with 20052, 20004, 20064, and 20059.
Average noise level (dBA)
20006's 64.3 dBA pop-weighted average is the highest among the peer group. District of Columbia as a whole averages 57.1 dBA and the U.S. averages 52.0 dBA. Both are lower than 20006 because most of either area is rural land away from major roads.
Share of residents above 55 dBA
About 99.1% of 20006 residents live in blocks where outdoor levels exceed the EPA's 55 dBA threshold. That's more than any of its peer group. Measured by land area instead, 93.3% of 20006's footprint sits above 55 dBA, against a District of Columbia average of 60.6% and a national average of 28.1%.
What This Means if You're Moving to 20006
Distance from highways matters more than the neighborhood name. Two homes in the same zip code can differ by 20 dBA if one sits 100 meters from and the other 500 meters away. The model captures this at 100-meter resolution, so noise exposure changes block by block.
Tree canopy can help reduce modeled noise exposure. Roughly 0% of 20006 is under tree cover (much lighter than most zip codes), and the dominant land cover is high-intensity developed land. Both are measured from federal USDA Forest Service and USGS satellite imagery at 30-meter resolution. Streets with 60% or higher canopy show 3 to 5 dBA lower noise than comparable streets with bare ground or pavement, which is why the per-place decay rate above already accounts for it.
Airport noise is directional. Ronald Reagan Washington Ntl's approach paths concentrate aviation noise to the south. Neighborhoods to the north of downtown show no measurable contribution from the airport.
Sources & Methodology
The BestNeighborhood noise model is calibrated against nearly one million federal ground-truth measurements across four states. Road noise is computed from segment-level federal traffic data and propagated outward using physics-based acoustic decay, with attenuation rates that depend on the surrounding land cover.
All inputs are published federal datasets. Block-level noise is computed by combining road, rail, and aviation sound sources in the energy domain, the same physics used in professional environmental noise assessments. Read the full methodology.
