Noise Levels in 25868, WV | Find Quiet Neighborhoods With Our Sound Map

41 dBA
Average noise across 25868
Soft rainfall
12
Residents above the EPA 55 dBA threshold
3% of 25868 residents
60 dBA
Loudest residential point
Normal conversation an arm’s length away

This map shows modeled outdoor noise across 25868 at 100-meter resolution, combining road, aviation, and rail sources. Green areas measure below 45 dBA. Orange and red exceed the EPA's 55 dBA outdoor threshold linked to long-term health effects. Use the layer toggles to view each source on its own or all together.

Overall
Road
Rail
Aviation
25868, WV Map of Noise Levels in 25868
Click the map to explore
35 45 55 70 90
Quietest (dBA) Loudest
Colorblind friendly off

What the numbers sound like

  • 30 dBAWhisper
  • 40 dBASoft rainfall
  • 45 dBAQuiet suburban street at night
  • 50 dBAQuiet office
  • 55 dBAEPA outdoor threshold: light traffic 100 ft away
  • 60 dBANormal conversation an arm's length away
  • 65 dBABusy restaurant
  • 70 dBAHighway traffic 50 ft away
  • 80 dBACity bus interior

Population Above the EPA Outdoor Threshold

The EPA's 55 dBA outdoor reference level is a common benchmark for residential noise exposure, especially for activity interference, annoyance, and long-term community noise concerns. About 12 25868 residents, or 2.8%, live above that level. By land area, 5.3% of 25868 is above 55 dBA.

See how noise in 25868 compares to similar-sized zip codes.

Noise by Part of 25868

Average noise levels for 25868 residents, grouped by direction from the center of 25868. Central 25868 carries the highest population-weighted average; Western 25868 carries the lowest. Just 0% of residents in Western 25868 live in blocks above the EPA's 55 dBA threshold, a fraction of the share in Central 25868.

Central 25868

51.6 dBA · Moderate
Quiet office to normal conversation

0% of people above 55 dBA

QuietLoud

Eastern 25868

39.9 dBA · Quiet
Soft rainfall

4% of people above 55 dBA

QuietLoud

Northern 25868

47.3 dBA · Mostly quiet
Quiet office

6% of people above 55 dBA

QuietLoud

Southern 25868

40.8 dBA · Quiet
Soft rainfall

3% of people above 55 dBA

QuietLoud

Western 25868

37.6 dBA · Quiet
Soft rainfall

0% of people above 55 dBA

QuietLoud

Central 25868 sounds about 164% louder than Western 25868 to the human ear, a 14.0 dBA gap. Every 10 dBA roughly doubles perceived loudness. Within any of these directions, two homes a quarter mile apart can still differ by 10 or more dBA depending on how close they sit to a major highway.

Loudest Road Corridors

The model evaluates every road in 25868 using federal traffic counts, posted speeds, heavy-truck ratios, and pavement type. The source level shown is the modeled noise at the road centerline, where it is loudest. Noise drops with distance, faster in vegetated areas and slower over open pavement.

RoadTypeAvg. source dBAPeak source dBA
Propps Rdg Local 54.0 56
Midland Trl Minor arterial 55.5 56
Egypt Rd Local 51.2 55
Edmond Rd Major collector 52.0 52
Lansing Edmond Rd Major collector 51.0 51

How far back from Propps Rdg do you need to be?

Propps Rdg produces an estimated 56 dBA at its loudest centerline points. Noise drops logarithmically with distance, with the exact rate depending on what's between you and the road. Tree cover, walls, terrain, and pavement type all matter. At roughly a quarter mile back, traffic fades into the noise level of a soft rainfall.

At source
56 dBA
Quiet office to normal conversation
165 ft
42 dBA
Quiet suburban street at night
330 ft
35 dBA
Soft rainfall
660 ft
35 dBA
Soft rainfall
¼ mile
35 dBA
Soft rainfall
½ mile
35 dBA
Soft rainfall

Calculated from the model's calibrated attenuation formula. About 86% of 25868 sits under tree canopy (much heavier than most zip codes) and roughly 1% is impervious surface like pavement and rooftops. Both are folded into the per-place decay rate above. Heavier canopy pulls noise down faster with distance; impervious surfaces slow the drop.

How Noise Is Distributed Across 25868

The bar chart below shows the share of 25868 residents in each noise band. About 98% of residents live below the EPA's 55 dBA threshold, and roughly 0% live in blocks above 60 dBA. Long-term exposure in that range is linked to elevated stress hormones and cardiovascular risk.

How 25868 Compares

25868 sits at the louder end of the spectrum. Below: how 25868's average outdoor noise and share of residents above the EPA threshold compare with 25837, 26680, 25085, and 25118.

Average noise level (dBA)

25868's 40.6 dBA pop-weighted average is at the louder end of the spectrum. West Virginia as a whole averages 47.7 dBA and the U.S. averages 52.0 dBA. Both are lower than 25868 because most of either area is rural land away from major roads.

Share of residents above 55 dBA

About 2.8% of 25868 residents live in blocks where outdoor levels exceed the EPA's 55 dBA threshold. That's in the middle of its peer group. Measured by land area instead, 5.3% of 25868's footprint sits above 55 dBA, against a West Virginia average of 21.6% and a national average of 28.1%.

What This Means if You're Moving to 25868

  • Distance from highways matters more than the neighborhood name. Two homes in the same zip code can differ by 20 dBA if one sits 100 meters from Propps Rdg and the other 500 meters away. The model captures this at 100-meter resolution, so noise exposure changes block by block.
  • Tree canopy can help reduce modeled noise exposure. Roughly 86% of 25868 is under tree cover (much heavier than most zip codes), and the dominant land cover is deciduous forest. Both are measured from federal USDA Forest Service and USGS satellite imagery at 30-meter resolution. Streets with 60% or higher canopy show 3 to 5 dBA lower noise than comparable streets with bare ground or pavement, which is why the per-place decay rate above already accounts for it.

Sources & Methodology

The BestNeighborhood noise model is calibrated against nearly one million federal ground-truth measurements across four states. Road noise is computed from segment-level federal traffic data and propagated outward using physics-based acoustic decay, with attenuation rates that depend on the surrounding land cover.

Federal datasets used:

FHWA Highway Performance Monitoring System: road geometry, traffic counts, lane configuration
U.S. DoT Bureau of Transportation Statistics National Transportation Noise Map: aviation and rail noise, road calibration ground truth
USGS / MRLC National Land Cover Database: land cover and impervious surface coverage
USDA Forest Service Tree Canopy Cover: vegetation density for sound propagation
U.S. Census Bureau TIGER/Line: block-level geography and population
U.S. EPA Levels Document: 55 dBA outdoor reference level

All inputs are published federal datasets. Block-level noise is computed by combining road, rail, and aviation sound sources in the energy domain, the same physics used in professional environmental noise assessments. Read the full methodology.