Noise Levels in 31405, GA | Find Quiet Neighborhoods With Our Sound Map

56 dBA
Average noise across 31405
Quiet office to normal conversation
15,930
Residents above the EPA 55 dBA threshold
47% of 31405 residents
108 dBA
Loudest residential point
Power saw

This map shows modeled outdoor noise across 31405 at 100-meter resolution, combining road, aviation, and rail sources. Green areas measure below 45 dBA. Orange and red exceed the EPA's 55 dBA outdoor threshold linked to long-term health effects. Use the layer toggles to view each source on its own or all together.

Overall
Road
Rail
Aviation
31405, GA Map of Noise Levels in 31405
Click the map to explore
35 45 55 70 90
Quietest (dBA) Loudest
Colorblind friendly off

What the numbers sound like

  • 30 dBAWhisper
  • 40 dBASoft rainfall
  • 45 dBAQuiet suburban street at night
  • 50 dBAQuiet office
  • 55 dBAEPA outdoor threshold: light traffic 100 ft away
  • 60 dBANormal conversation an arm's length away
  • 65 dBABusy restaurant
  • 70 dBAHighway traffic 50 ft away
  • 80 dBACity bus interior

Population Above the EPA Outdoor Threshold

The EPA's 55 dBA outdoor reference level is a common benchmark for residential noise exposure, especially for activity interference, annoyance, and long-term community noise concerns. About 15,930 31405 residents, or 47.2%, live above that level. By land area, 61.8% of 31405 is above 55 dBA.

See how noise in 31405 compares to similar-sized zip codes.

Noise by Part of 31405

Average noise levels for 31405 residents, grouped by direction from the center of 31405. Central 31405 carries the highest population-weighted average; Western 31405 carries the lowest. Just 23% of residents in Western 31405 live in blocks above the EPA's 55 dBA threshold, a third of the share in Central 31405.

Central 31405

58.4 dBA · Loud
Normal conversation an arm’s length away

67% of people above 55 dBA

QuietLoud

Eastern 31405

57.1 dBA · Moderate-loud
Normal conversation an arm’s length away

65% of people above 55 dBA

QuietLoud

Northern 31405

56.3 dBA · Moderate-loud
Normal conversation an arm’s length away

40% of people above 55 dBA

QuietLoud

Southern 31405

54.2 dBA · Moderate-loud
Quiet office to normal conversation

19% of people above 55 dBA

QuietLoud

Western 31405

53.3 dBA · Moderate-loud
Quiet office to normal conversation

23% of people above 55 dBA

QuietLoud

Central 31405 sounds about 42% louder than Western 31405 to the human ear, a 5.1 dBA gap. Every 10 dBA roughly doubles perceived loudness. Within any of these directions, two homes a quarter mile apart can still differ by 10 or more dBA depending on how close they sit to a major highway.

Loudest Road Corridors

The model evaluates every road in 31405 using federal traffic counts, posted speeds, heavy-truck ratios, and pavement type. The source level shown is the modeled noise at the road centerline, where it is loudest. Noise drops with distance, faster in vegetated areas and slower over open pavement.

RoadTypeAvg. source dBAPeak source dBA
Interstate 516 Nb; Interstate 74.2 76
I-16 Interstate 70.8 76
State Rte 404 Interstate 75.1 76
State Rte 21 Interstate 65.8 74
Veterans Pkwy; Freeway 72.4 74

How far back from Interstate 516 Nb; do you need to be?

Interstate 516 Nb; produces an estimated 76 dBA at its loudest centerline points. Noise drops logarithmically with distance, with the exact rate depending on what's between you and the road. Tree cover, walls, terrain, and pavement type all matter. At roughly a quarter mile back, traffic fades into the noise level of a soft rainfall.

At source
76 dBA
City bus interior
165 ft
62 dBA
Busy restaurant
330 ft
54 dBA
Quiet office to normal conversation
660 ft
46 dBA
Quiet office
¼ mile
38 dBA
Soft rainfall
½ mile
35 dBA
Soft rainfall

Calculated from the model's calibrated attenuation formula. About 28% of 31405 sits under tree canopy (about average for zip codes) and roughly 34% is impervious surface like pavement and rooftops. Both are folded into the per-place decay rate above. Heavier canopy pulls noise down faster with distance; impervious surfaces slow the drop.

Rail Noise

Active freight rail runs through parts of 31405. For most blocks the rail-only contribution is small. Combined road-plus-rail noise rarely exceeds road noise on its own. The exceptions are the handful of blocks within roughly a quarter mile of the right-of-way during pass-through hours.

Use the Rail toggle on the map above to isolate rail's contribution from road and aviation.

Airport Noise

Savannah/Hilton Head International (SAV) sits northwest of 31405. The U.S. Department of Transportation models aviation noise around this airport from federal traffic data, and the model uses those federal measurements rather than synthetic predictions.

Blocks under the approach and departure paths carry combined road-plus-aviation noise, with some exceeding 45 dBA on the map's Overall layer. Blocks on the opposite side of 31405, particularly to the southeast, show no measurable aviation contribution. Use the Aviation toggle on the map above to isolate the airport's footprint.

How Noise Is Distributed Across 31405

The bar chart below shows the share of 31405 residents in each noise band. About 36% of residents live below the EPA's 55 dBA threshold, and roughly 11% live in blocks above 60 dBA. Long-term exposure in that range is linked to elevated stress hormones and cardiovascular risk.

How 31405 Compares

31405 sits at the louder end of the spectrum. Below: how 31405's average outdoor noise and share of residents above the EPA threshold compare with 31406, 31404, 31322, and 31324.

Average noise level (dBA)

31405's 55.7 dBA pop-weighted average is at the louder end of the spectrum. Georgia as a whole averages 51.0 dBA and the U.S. averages 52.0 dBA. Both are lower than 31405 because most of either area is rural land away from major roads.

Share of residents above 55 dBA

About 47.2% of 31405 residents live in blocks where outdoor levels exceed the EPA's 55 dBA threshold. That's in the middle of its peer group. Measured by land area instead, 61.8% of 31405's footprint sits above 55 dBA, against a Georgia average of 22.6% and a national average of 28.1%.

What This Means if You're Moving to 31405

  • Distance from highways matters more than the neighborhood name. Two homes in the same zip code can differ by 20 dBA if one sits 100 meters from Interstate 516 Nb; and the other 500 meters away. The model captures this at 100-meter resolution, so noise exposure changes block by block.
  • Tree canopy can help reduce modeled noise exposure. Roughly 28% of 31405 is under tree cover (about average for zip codes), and the dominant land cover is low-intensity developed land. Both are measured from federal USDA Forest Service and USGS satellite imagery at 30-meter resolution. Streets with 60% or higher canopy show 3 to 5 dBA lower noise than comparable streets with bare ground or pavement, which is why the per-place decay rate above already accounts for it.
  • Airport noise is directional. Savannah/Hilton Head International's approach paths concentrate aviation noise to the northwest. Neighborhoods to the southeast of downtown show no measurable contribution from the airport.

Sources & Methodology

The BestNeighborhood noise model is calibrated against nearly one million federal ground-truth measurements across four states. Road noise is computed from segment-level federal traffic data and propagated outward using physics-based acoustic decay, with attenuation rates that depend on the surrounding land cover.

Federal datasets used:

FHWA Highway Performance Monitoring System: road geometry, traffic counts, lane configuration
U.S. DoT Bureau of Transportation Statistics National Transportation Noise Map: aviation and rail noise, road calibration ground truth
USGS / MRLC National Land Cover Database: land cover and impervious surface coverage
USDA Forest Service Tree Canopy Cover: vegetation density for sound propagation
U.S. Census Bureau TIGER/Line: block-level geography and population
U.S. EPA Levels Document: 55 dBA outdoor reference level

All inputs are published federal datasets. Block-level noise is computed by combining road, rail, and aviation sound sources in the energy domain, the same physics used in professional environmental noise assessments. Read the full methodology.