Noise Levels in 50530, IA | Find Quiet Neighborhoods With Our Sound Map

48 dBA
Average noise across 50530
Quiet office
236
Residents above the EPA 55 dBA threshold
29% of 50530 residents
64 dBA
Loudest residential point
Busy restaurant

This map shows modeled outdoor noise across 50530 at 100-meter resolution, combining road, aviation, and rail sources. Green areas measure below 45 dBA. Orange and red exceed the EPA's 55 dBA outdoor threshold linked to long-term health effects. Use the layer toggles to view each source on its own or all together.

Overall
Road
Rail
Aviation
50530, IA Map of Noise Levels in 50530
Click the map to explore
35 45 55 70 90
Quietest (dBA) Loudest
Colorblind friendly off

What the numbers sound like

  • 30 dBAWhisper
  • 40 dBASoft rainfall
  • 45 dBAQuiet suburban street at night
  • 50 dBAQuiet office
  • 55 dBAEPA outdoor threshold: light traffic 100 ft away
  • 60 dBANormal conversation an arm's length away
  • 65 dBABusy restaurant
  • 70 dBAHighway traffic 50 ft away
  • 80 dBACity bus interior

Population Above the EPA Outdoor Threshold

The EPA's 55 dBA outdoor reference level is a common benchmark for residential noise exposure, especially for activity interference, annoyance, and long-term community noise concerns. About 236 50530 residents, or 29.3%, live above that level. By land area, 24.1% of 50530 is above 55 dBA.

See how noise in 50530 compares to similar-sized zip codes.

Noise by Part of 50530

Average noise levels for 50530 residents, grouped by direction from the center of 50530. Central 50530 carries the highest population-weighted average; Eastern 50530 carries the lowest. Just 0% of residents in Eastern 50530 live in blocks above the EPA's 55 dBA threshold, a fifth of the share in Central 50530.

Central 50530

52.7 dBA · Moderate
Quiet office to normal conversation

47% of people above 55 dBA

QuietLoud

Eastern 50530

38.5 dBA · Quiet
Soft rainfall

0% of people above 55 dBA

QuietLoud

Northern 50530

40.4 dBA · Quiet
Soft rainfall

1% of people above 55 dBA

QuietLoud

Southern 50530

40.6 dBA · Quiet
Soft rainfall

4% of people above 55 dBA

QuietLoud

Western 50530

52.7 dBA · Moderate
Quiet office to normal conversation

46% of people above 55 dBA

QuietLoud

Central 50530 sounds about 168% louder than Eastern 50530 to the human ear, a 14.2 dBA gap. Every 10 dBA roughly doubles perceived loudness. Within any of these directions, two homes a quarter mile apart can still differ by 10 or more dBA depending on how close they sit to a major highway.

Loudest Road Corridors

The model evaluates every road in 50530 using federal traffic counts, posted speeds, heavy-truck ratios, and pavement type. The source level shown is the modeled noise at the road centerline, where it is loudest. Noise drops with distance, faster in vegetated areas and slower over open pavement.

RoadTypeAvg. source dBAPeak source dBA
360TH Street, E Local 55.3 58
350TH Street, E Local 54.3 56
390TH Street, E Local 56.0 56
Union Avenue, N Local 51.9 56
Taylor Avenue, N Local 52.9 56

How far back from 360TH Street, E do you need to be?

360TH Street, E produces an estimated 58 dBA at its loudest centerline points. Noise drops logarithmically with distance, with the exact rate depending on what's between you and the road. Tree cover, walls, terrain, and pavement type all matter. At roughly a quarter mile back, traffic fades into the noise level of a soft rainfall.

At source
58 dBA
Normal conversation an arm’s length away
165 ft
44 dBA
Quiet suburban street at night
330 ft
36 dBA
Soft rainfall
660 ft
35 dBA
Soft rainfall
¼ mile
35 dBA
Soft rainfall
½ mile
35 dBA
Soft rainfall

Calculated from the model's calibrated attenuation formula. About 14% of 50530 sits under tree canopy (lighter than most zip codes) and roughly 16% is impervious surface like pavement and rooftops. Both are folded into the per-place decay rate above. Heavier canopy pulls noise down faster with distance; impervious surfaces slow the drop.

How Noise Is Distributed Across 50530

The bar chart below shows the share of 50530 residents in each noise band. About 76% of residents live below the EPA's 55 dBA threshold, and roughly 0% live in blocks above 60 dBA. Long-term exposure in that range is linked to elevated stress hormones and cardiovascular risk.

How 50530 Compares

50530 sits the highest among the peer group. Below: how 50530's average outdoor noise and share of residents above the EPA threshold compare with 50249, 50557, 50569, and 50532.

Average noise level (dBA)

50530's 47.7 dBA pop-weighted average is the highest among the peer group. Iowa as a whole averages 52.2 dBA and the U.S. averages 52.0 dBA. Both are lower than 50530 because most of either area is rural land away from major roads.

Share of residents above 55 dBA

About 29.3% of 50530 residents live in blocks where outdoor levels exceed the EPA's 55 dBA threshold. That's more than any of its peer group. Measured by land area instead, 24.1% of 50530's footprint sits above 55 dBA, against a Iowa average of 23.6% and a national average of 28.1%.

What This Means if You're Moving to 50530

  • Distance from highways matters more than the neighborhood name. Two homes in the same zip code can differ by 20 dBA if one sits 100 meters from 360TH Street, E and the other 500 meters away. The model captures this at 100-meter resolution, so noise exposure changes block by block.
  • Tree canopy can help reduce modeled noise exposure. Roughly 14% of 50530 is under tree cover (lighter than most zip codes), and the dominant land cover is low-intensity developed land. Both are measured from federal USDA Forest Service and USGS satellite imagery at 30-meter resolution. Streets with 60% or higher canopy show 3 to 5 dBA lower noise than comparable streets with bare ground or pavement, which is why the per-place decay rate above already accounts for it.

Sources & Methodology

The BestNeighborhood noise model is calibrated against nearly one million federal ground-truth measurements across four states. Road noise is computed from segment-level federal traffic data and propagated outward using physics-based acoustic decay, with attenuation rates that depend on the surrounding land cover.

Federal datasets used:

FHWA Highway Performance Monitoring System: road geometry, traffic counts, lane configuration
U.S. DoT Bureau of Transportation Statistics National Transportation Noise Map: aviation and rail noise, road calibration ground truth
USGS / MRLC National Land Cover Database: land cover and impervious surface coverage
USDA Forest Service Tree Canopy Cover: vegetation density for sound propagation
U.S. Census Bureau TIGER/Line: block-level geography and population
U.S. EPA Levels Document: 55 dBA outdoor reference level

All inputs are published federal datasets. Block-level noise is computed by combining road, rail, and aviation sound sources in the energy domain, the same physics used in professional environmental noise assessments. Read the full methodology.