Noise Levels in 70360, LA | Find Quiet Neighborhoods With Our Sound Map

52 dBA
Average noise across 70360
Quiet office to normal conversation
6,675
Residents above the EPA 55 dBA threshold
28% of 70360 residents
74 dBA
Loudest residential point
City bus interior

This map shows modeled outdoor noise across 70360 at 100-meter resolution, combining road, aviation, and rail sources. Green areas measure below 45 dBA. Orange and red exceed the EPA's 55 dBA outdoor threshold linked to long-term health effects. Use the layer toggles to view each source on its own or all together.

Overall
Road
Rail
Aviation
70360, LA Map of Noise Levels in 70360
Click the map to explore
35 45 55 70 90
Quietest (dBA) Loudest
Colorblind friendly off

What the numbers sound like

  • 30 dBAWhisper
  • 40 dBASoft rainfall
  • 45 dBAQuiet suburban street at night
  • 50 dBAQuiet office
  • 55 dBAEPA outdoor threshold: light traffic 100 ft away
  • 60 dBANormal conversation an arm's length away
  • 65 dBABusy restaurant
  • 70 dBAHighway traffic 50 ft away
  • 80 dBACity bus interior

Population Above the EPA Outdoor Threshold

The EPA's 55 dBA outdoor reference level is a common benchmark for residential noise exposure, especially for activity interference, annoyance, and long-term community noise concerns. About 6,675 70360 residents, or 27.6%, live above that level. By land area, 40.3% of 70360 is above 55 dBA.

See how noise in 70360 compares to similar-sized zip codes.

Noise by Part of 70360

Average noise levels for 70360 residents, grouped by direction from the center of 70360. Eastern 70360 carries the highest population-weighted average; Western 70360 carries the lowest. Just 10% of residents in Western 70360 live in blocks above the EPA's 55 dBA threshold, a third of the share in Eastern 70360.

Central 70360

54.6 dBA · Moderate-loud
Quiet office to normal conversation

22% of people above 55 dBA

QuietLoud

Eastern 70360

56.2 dBA · Moderate-loud
Normal conversation an arm’s length away

48% of people above 55 dBA

QuietLoud

Northern 70360

51.8 dBA · Moderate
Quiet office to normal conversation

22% of people above 55 dBA

QuietLoud

Southern 70360

50.8 dBA · Moderate
Quiet office

26% of people above 55 dBA

QuietLoud

Western 70360

45.7 dBA · Mostly quiet
Quiet suburban street at night

10% of people above 55 dBA

QuietLoud

Eastern 70360 sounds about 107% louder than Western 70360 to the human ear, a 10.5 dBA gap. Every 10 dBA roughly doubles perceived loudness. Within any of these directions, two homes a quarter mile apart can still differ by 10 or more dBA depending on how close they sit to a major highway.

Loudest Road Corridors

The model evaluates every road in 70360 using federal traffic counts, posted speeds, heavy-truck ratios, and pavement type. The source level shown is the modeled noise at the road centerline, where it is loudest. Noise drops with distance, faster in vegetated areas and slower over open pavement.

RoadTypeAvg. source dBAPeak source dBA
La 3040 Principal arterial 66.4 72
La 24 Principal arterial 68.8 70
Enterprise Dr Major collector 56.4 62
La 182 Minor arterial 56.9 61
La 311 Minor arterial 59.7 61

How far back from La 3040 do you need to be?

La 3040 produces an estimated 72 dBA at its loudest centerline points. Noise drops logarithmically with distance, with the exact rate depending on what's between you and the road. Tree cover, walls, terrain, and pavement type all matter. At roughly a quarter mile back, traffic fades into the noise level of a soft rainfall.

At source
72 dBA
City bus interior
165 ft
57 dBA
Normal conversation an arm’s length away
330 ft
49 dBA
Quiet office
660 ft
40 dBA
Soft rainfall
¼ mile
35 dBA
Soft rainfall
½ mile
35 dBA
Soft rainfall

Calculated from the model's calibrated attenuation formula. About 14% of 70360 sits under tree canopy (lighter than most zip codes) and roughly 36% is impervious surface like pavement and rooftops. Both are folded into the per-place decay rate above. Heavier canopy pulls noise down faster with distance; impervious surfaces slow the drop.

How Noise Is Distributed Across 70360

The bar chart below shows the share of 70360 residents in each noise band. About 72% of residents live below the EPA's 55 dBA threshold, and roughly 7% live in blocks above 60 dBA. Long-term exposure in that range is linked to elevated stress hormones and cardiovascular risk.

How 70360 Compares

70360 sits at the louder end of the spectrum. Below: how 70360's average outdoor noise and share of residents above the EPA threshold compare with 70364, 70363, 70301, and 70394.

Average noise level (dBA)

70360's 51.5 dBA pop-weighted average is at the louder end of the spectrum. Louisiana as a whole averages 50.7 dBA and the U.S. averages 52.0 dBA. Both are lower than 70360 because most of either area is rural land away from major roads.

Share of residents above 55 dBA

About 27.6% of 70360 residents live in blocks where outdoor levels exceed the EPA's 55 dBA threshold. That's more than any of its peer group. Measured by land area instead, 40.3% of 70360's footprint sits above 55 dBA, against a Louisiana average of 28.9% and a national average of 28.1%.

What This Means if You're Moving to 70360

  • Distance from highways matters more than the neighborhood name. Two homes in the same zip code can differ by 20 dBA if one sits 100 meters from La 3040 and the other 500 meters away. The model captures this at 100-meter resolution, so noise exposure changes block by block.
  • Tree canopy can help reduce modeled noise exposure. Roughly 14% of 70360 is under tree cover (lighter than most zip codes), and the dominant land cover is low-intensity developed land. Both are measured from federal USDA Forest Service and USGS satellite imagery at 30-meter resolution. Streets with 60% or higher canopy show 3 to 5 dBA lower noise than comparable streets with bare ground or pavement, which is why the per-place decay rate above already accounts for it.

Sources & Methodology

The BestNeighborhood noise model is calibrated against nearly one million federal ground-truth measurements across four states. Road noise is computed from segment-level federal traffic data and propagated outward using physics-based acoustic decay, with attenuation rates that depend on the surrounding land cover.

Federal datasets used:

FHWA Highway Performance Monitoring System: road geometry, traffic counts, lane configuration
U.S. DoT Bureau of Transportation Statistics National Transportation Noise Map: aviation and rail noise, road calibration ground truth
USGS / MRLC National Land Cover Database: land cover and impervious surface coverage
USDA Forest Service Tree Canopy Cover: vegetation density for sound propagation
U.S. Census Bureau TIGER/Line: block-level geography and population
U.S. EPA Levels Document: 55 dBA outdoor reference level

All inputs are published federal datasets. Block-level noise is computed by combining road, rail, and aviation sound sources in the energy domain, the same physics used in professional environmental noise assessments. Read the full methodology.