Noise Levels in 71295, LA | Find Quiet Neighborhoods With Our Sound Map

46 dBA
Average noise across 71295
Quiet suburban street at night
1,648
Residents above the EPA 55 dBA threshold
12% of 71295 residents
73 dBA
Loudest residential point
City bus interior

This map shows modeled outdoor noise across 71295 at 100-meter resolution, combining road, aviation, and rail sources. Green areas measure below 45 dBA. Orange and red exceed the EPA's 55 dBA outdoor threshold linked to long-term health effects. Use the layer toggles to view each source on its own or all together.

Overall
Road
Rail
Aviation
71295, LA Map of Noise Levels in 71295
Click the map to explore
35 45 55 70 90
Quietest (dBA) Loudest
Colorblind friendly off

What the numbers sound like

  • 30 dBAWhisper
  • 40 dBASoft rainfall
  • 45 dBAQuiet suburban street at night
  • 50 dBAQuiet office
  • 55 dBAEPA outdoor threshold: light traffic 100 ft away
  • 60 dBANormal conversation an arm's length away
  • 65 dBABusy restaurant
  • 70 dBAHighway traffic 50 ft away
  • 80 dBACity bus interior

Population Above the EPA Outdoor Threshold

The EPA's 55 dBA outdoor reference level is a common benchmark for residential noise exposure, especially for activity interference, annoyance, and long-term community noise concerns. About 1,648 71295 residents, or 12.1%, live above that level. By land area, 16.3% of 71295 is above 55 dBA.

See how noise in 71295 compares to similar-sized zip codes.

Noise by Part of 71295

Average noise levels for 71295 residents, grouped by direction from the center of 71295. Central 71295 carries the highest population-weighted average; Northern 71295 carries the lowest. Just 4% of residents in Northern 71295 live in blocks above the EPA's 55 dBA threshold, a fifth of the share in Central 71295.

Central 71295

51.5 dBA · Moderate
Quiet office to normal conversation

32% of people above 55 dBA

QuietLoud

Eastern 71295

43.1 dBA · Quiet
Quiet suburban street at night

4% of people above 55 dBA

QuietLoud

Northern 71295

42.8 dBA · Quiet
Quiet suburban street at night

4% of people above 55 dBA

QuietLoud

Southern 71295

46.8 dBA · Mostly quiet
Quiet office

16% of people above 55 dBA

QuietLoud

Western 71295

48.3 dBA · Mostly quiet
Quiet office

18% of people above 55 dBA

QuietLoud

Central 71295 sounds about 83% louder than Northern 71295 to the human ear, a 8.7 dBA gap. Every 10 dBA roughly doubles perceived loudness. Within any of these directions, two homes a quarter mile apart can still differ by 10 or more dBA depending on how close they sit to a major highway.

Loudest Road Corridors

The model evaluates every road in 71295 using federal traffic counts, posted speeds, heavy-truck ratios, and pavement type. The source level shown is the modeled noise at the road centerline, where it is loudest. Noise drops with distance, faster in vegetated areas and slower over open pavement.

RoadTypeAvg. source dBAPeak source dBA
US-425 Principal arterial 63.9 66
La 865 Local 61.1 62
La 4 Major collector 57.1 60
La 130 Major collector 60.0 60
La 874 Local 59.0 59

How far back from US-425 do you need to be?

US-425 produces an estimated 66 dBA at its loudest centerline points. Noise drops logarithmically with distance, with the exact rate depending on what's between you and the road. Tree cover, walls, terrain, and pavement type all matter. At roughly a quarter mile back, traffic fades into the noise level of a soft rainfall.

At source
66 dBA
Busy restaurant
165 ft
53 dBA
Quiet office to normal conversation
330 ft
45 dBA
Quiet suburban street at night
660 ft
38 dBA
Soft rainfall
¼ mile
35 dBA
Soft rainfall
½ mile
35 dBA
Soft rainfall

Calculated from the model's calibrated attenuation formula. About 25% of 71295 sits under tree canopy (about average for zip codes) and roughly 10% is impervious surface like pavement and rooftops. Both are folded into the per-place decay rate above. Heavier canopy pulls noise down faster with distance; impervious surfaces slow the drop.

How Noise Is Distributed Across 71295

The bar chart below shows the share of 71295 residents in each noise band. About 91% of residents live below the EPA's 55 dBA threshold, and roughly 1% live in blocks above 60 dBA. Long-term exposure in that range is linked to elevated stress hormones and cardiovascular risk.

How 71295 Compares

71295 sits at the quieter end of the spectrum. Below: how 71295's average outdoor noise and share of residents above the EPA threshold compare with 71269, 71201, 71418, and 71292.

Average noise level (dBA)

71295's 46.0 dBA pop-weighted average is at the quieter end of the spectrum. Louisiana as a whole averages 50.7 dBA and the U.S. averages 52.0 dBA. Both are lower than 71295 because most of either area is rural land away from major roads.

Share of residents above 55 dBA

About 12.1% of 71295 residents live in blocks where outdoor levels exceed the EPA's 55 dBA threshold. That's in the middle of its peer group. Measured by land area instead, 16.3% of 71295's footprint sits above 55 dBA, against a Louisiana average of 28.9% and a national average of 28.1%.

What This Means if You're Moving to 71295

  • Distance from highways matters more than the neighborhood name. Two homes in the same zip code can differ by 20 dBA if one sits 100 meters from US-425 and the other 500 meters away. The model captures this at 100-meter resolution, so noise exposure changes block by block.
  • Tree canopy can help reduce modeled noise exposure. Roughly 25% of 71295 is under tree cover (about average for zip codes), and the dominant land cover is cultivated cropland. Both are measured from federal USDA Forest Service and USGS satellite imagery at 30-meter resolution. Streets with 60% or higher canopy show 3 to 5 dBA lower noise than comparable streets with bare ground or pavement, which is why the per-place decay rate above already accounts for it.

Sources & Methodology

The BestNeighborhood noise model is calibrated against nearly one million federal ground-truth measurements across four states. Road noise is computed from segment-level federal traffic data and propagated outward using physics-based acoustic decay, with attenuation rates that depend on the surrounding land cover.

Federal datasets used:

FHWA Highway Performance Monitoring System: road geometry, traffic counts, lane configuration
U.S. DoT Bureau of Transportation Statistics National Transportation Noise Map: aviation and rail noise, road calibration ground truth
USGS / MRLC National Land Cover Database: land cover and impervious surface coverage
USDA Forest Service Tree Canopy Cover: vegetation density for sound propagation
U.S. Census Bureau TIGER/Line: block-level geography and population
U.S. EPA Levels Document: 55 dBA outdoor reference level

All inputs are published federal datasets. Block-level noise is computed by combining road, rail, and aviation sound sources in the energy domain, the same physics used in professional environmental noise assessments. Read the full methodology.