Noise Levels in Alma, TX | Find Quiet Neighborhoods With Our Sound Map

48 dBA
Average noise across Alma
Quiet office
112
Residents above the EPA 55 dBA threshold
18% of Alma residents
81 dBA
Loudest residential point
City bus interior

This map shows modeled outdoor noise across Alma at 100-meter resolution, combining road, aviation, and rail sources. Green areas measure below 45 dBA. Orange and red exceed the EPA's 55 dBA outdoor threshold linked to long-term health effects. Use the layer toggles to view each source on its own or all together.

Overall
Road
Rail
Aviation
Alma, TX Map of Noise Levels in Alma
Click the map to explore
35 45 55 70 90
Quietest (dBA) Loudest
Colorblind friendly off

What the numbers sound like

  • 30 dBAWhisper
  • 40 dBASoft rainfall
  • 45 dBAQuiet suburban street at night
  • 50 dBAQuiet office
  • 55 dBAEPA outdoor threshold: light traffic 100 ft away
  • 60 dBANormal conversation an arm's length away
  • 65 dBABusy restaurant
  • 70 dBAHighway traffic 50 ft away
  • 80 dBACity bus interior

Population Above the EPA Outdoor Threshold

The EPA's 55 dBA outdoor reference level is a common benchmark for residential noise exposure, especially for activity interference, annoyance, and long-term community noise concerns. About 112 Alma residents, or 18.3%, live above that level. By land area, 41.1% of Alma is above 55 dBA.

See how noise in Alma compares to similar-sized cities.

Noise by Part of Alma

Average noise levels for Alma residents, grouped by direction from the center of Alma. Eastern Alma carries the highest population-weighted average; Southern Alma carries the lowest. Just 0% of residents in Southern Alma live in blocks above the EPA's 55 dBA threshold, a fifth of the share in Eastern Alma.

Central Alma

44.5 dBA · Quiet
Quiet suburban street at night

0% of people above 55 dBA

QuietLoud

Eastern Alma

58.7 dBA · Loud
Normal conversation an arm’s length away

37% of people above 55 dBA

QuietLoud

Northern Alma

46.8 dBA · Mostly quiet
Quiet office

31% of people above 55 dBA

QuietLoud

Southern Alma

38.2 dBA · Quiet
Soft rainfall

0% of people above 55 dBA

QuietLoud

Western Alma

43.1 dBA · Quiet
Quiet suburban street at night

3% of people above 55 dBA

QuietLoud

Eastern Alma sounds about 314% louder than Southern Alma to the human ear, a 20.5 dBA gap. Every 10 dBA roughly doubles perceived loudness. Within any of these directions, two homes a quarter mile apart can still differ by 10 or more dBA depending on how close they sit to a major highway.

How far back from US Hwy 287 do you need to be?

US Hwy 287 produces an estimated 77 dBA at its loudest centerline points. Noise drops logarithmically with distance, with the exact rate depending on what's between you and the road. Tree cover, walls, terrain, and pavement type all matter. At roughly a quarter mile back, traffic fades into the noise level of a soft rainfall.

At source
77 dBA
City bus interior
165 ft
63 dBA
Busy restaurant
330 ft
54 dBA
Quiet office to normal conversation
660 ft
46 dBA
Quiet suburban street at night
¼ mile
38 dBA
Soft rainfall
½ mile
35 dBA
Soft rainfall

Calculated from the model's calibrated attenuation formula. About 7% of Alma sits under tree canopy (lighter than most cities) and roughly 2% is impervious surface like pavement and rooftops. Both are folded into the per-place decay rate above. Heavier canopy pulls noise down faster with distance; impervious surfaces slow the drop.

-->

Rail Noise

Active freight rail runs through parts of Alma. For most blocks the rail-only contribution is small. Combined road-plus-rail noise rarely exceeds road noise on its own. The exceptions are the handful of blocks within roughly a quarter mile of the right-of-way during pass-through hours.

Use the Rail toggle on the map above to isolate rail's contribution from road and aviation.

How Noise Is Distributed Across Alma

The bar chart below shows the share of Alma residents in each noise band. About 69% of residents live below the EPA's 55 dBA threshold, and roughly 22% live in blocks above 60 dBA. Long-term exposure in that range is linked to elevated stress hormones and cardiovascular risk.

How Alma Compares

Alma sits at the quieter end of the spectrum. Below: how Alma's average outdoor noise and share of residents above the EPA threshold compare with Bardwell, Garrett, Chatfield, and Roane.

Average noise level (dBA)

Alma's 47.8 dBA pop-weighted average is at the quieter end of the spectrum. Texas as a whole averages 50.8 dBA and the U.S. averages 52.0 dBA. Both are lower than Alma because most of either area is rural land away from major roads.

Share of residents above 55 dBA

About 18.3% of Alma residents live in blocks where outdoor levels exceed the EPA's 55 dBA threshold. That's in the middle of its peer group. Measured by land area instead, 41.1% of Alma's footprint sits above 55 dBA, against a Texas average of 22.8% and a national average of 28.1%.

What This Means if You're Moving to Alma

  • Distance from highways matters more than the neighborhood name. Two homes in the same zip code can differ by 20 dBA if one sits 100 meters from US Hwy 287 and the other 500 meters away. The model captures this at 100-meter resolution, so noise exposure changes block by block.
  • Tree canopy can help reduce modeled noise exposure. Roughly 7% of Alma is under tree cover (lighter than most cities), and the dominant land cover is grassland. Both are measured from federal USDA Forest Service and USGS satellite imagery at 30-meter resolution. Streets with 60% or higher canopy show 3 to 5 dBA lower noise than comparable streets with bare ground or pavement, which is why the per-place decay rate above already accounts for it.

Sources & Methodology

The BestNeighborhood noise model is calibrated against nearly one million federal ground-truth measurements across four states. Road noise is computed from segment-level federal traffic data and propagated outward using physics-based acoustic decay, with attenuation rates that depend on the surrounding land cover.

Federal datasets used:

FHWA Highway Performance Monitoring System: road geometry, traffic counts, lane configuration
U.S. DoT Bureau of Transportation Statistics National Transportation Noise Map: aviation and rail noise, road calibration ground truth
USGS / MRLC National Land Cover Database: land cover and impervious surface coverage
USDA Forest Service Tree Canopy Cover: vegetation density for sound propagation
U.S. Census Bureau TIGER/Line: block-level geography and population
U.S. EPA Levels Document: 55 dBA outdoor reference level

All inputs are published federal datasets. Block-level noise is computed by combining road, rail, and aviation sound sources in the energy domain, the same physics used in professional environmental noise assessments. Read the full methodology.