Noise Levels in Beaver Hills, New Haven, CT | Find Quiet Neighborhoods With Our Sound Map
56 dBA
Average noise across Beaver Hills
Quiet office to normal conversation
2,634
Residents above the EPA 55 dBA threshold
51% of Beaver Hills residents
65 dBA
Loudest residential point
Busy restaurant
This map shows modeled outdoor noise across Beaver Hills at 100-meter resolution, combining road, aviation, and rail sources. Green areas measure below 45 dBA. Orange and red exceed the EPA's 55 dBA outdoor threshold linked to long-term health effects. Use the layer toggles to view each source on its own or all together.
Overall
Road
Rail
Aviation
Click the map to explore
35 dBa55 dBa (EPA limit)90+ dBa
3545557090
Quietest (dBA)Loudest
Colorblind friendlyoff
What the numbers sound like
30 dBAWhisper
40 dBASoft rainfall
45 dBAQuiet suburban street at night
50 dBAQuiet office
55 dBAEPA outdoor threshold: light traffic 100 ft away
60 dBANormal conversation an arm's length away
65 dBABusy restaurant
70 dBAHighway traffic 50 ft away
80 dBACity bus interior
Population Above the EPA Outdoor Threshold
The EPA's 55 dBA outdoor reference level is a common benchmark for residential noise exposure, especially for activity interference, annoyance, and long-term community noise concerns. About 2,634 Beaver Hills residents, or 51.0%, live above that level. By land area, 48.5% of Beaver Hills is above 55 dBA.
Average noise levels for Beaver Hills residents, grouped by direction from the center of Beaver Hills. Southern Beaver Hills carries the highest population-weighted average; Northern Beaver Hills carries the lowest. Just 42% of residents in Northern Beaver Hills live in blocks above the EPA's 55 dBA threshold, about two-thirds of the share in Southern Beaver Hills.
Central Beaver Hills
55.8 dBA · Moderate-loud
Quiet office to normal conversation
51% of people above 55 dBA
QuietLoud
Eastern Beaver Hills
54.2 dBA · Moderate-loud
Quiet office to normal conversation
40% of people above 55 dBA
QuietLoud
Northern Beaver Hills
54.1 dBA · Moderate-loud
Quiet office to normal conversation
42% of people above 55 dBA
QuietLoud
Southern Beaver Hills
59.1 dBA · Loud
Normal conversation an arm’s length away
68% of people above 55 dBA
QuietLoud
Western Beaver Hills
56.7 dBA · Moderate-loud
Normal conversation an arm’s length away
42% of people above 55 dBA
QuietLoud
Southern Beaver Hills sounds about 41% louder than Northern Beaver Hills to the human ear, a 5.0 dBA gap. Every 10 dBA roughly doubles perceived loudness. Within any of these directions, two homes a quarter mile apart can still differ by 10 or more dBA depending on how close they sit to a major highway.
How far back from Ellsworth Av do you need to be?
Ellsworth Av produces an estimated 57 dBA at its loudest centerline points. Noise drops logarithmically with distance, with the exact rate depending on what's between you and the road. Tree cover, walls, terrain, and pavement type all matter. At roughly a quarter mile back, traffic fades into the noise level of a soft rainfall.
At source
57 dBA
Normal conversation an arm’s length away
165 ft
43 dBA
Quiet suburban street at night
330 ft
35 dBA
Soft rainfall
660 ft
35 dBA
Soft rainfall
¼ mile
35 dBA
Soft rainfall
½ mile
35 dBA
Soft rainfall
Calculated from the model's calibrated attenuation formula. About 39% of Beaver Hills sits under tree canopy (much heavier than most neighborhoods) and roughly 37% is impervious surface like pavement and rooftops. Both are folded into the per-place decay rate above. Heavier canopy pulls noise down faster with distance; impervious surfaces slow the drop.
-->
Airport Noise
Tweed/New Haven (HVN) sits southeast of Beaver Hills. The U.S. Department of Transportation models aviation noise around this airport from federal traffic data, and the model uses those federal measurements rather than synthetic predictions.
Blocks under the approach and departure paths carry combined road-plus-aviation noise, with some exceeding 55 dBA on the map's Overall layer. Blocks on the opposite side of Beaver Hills, particularly to the northwest, show no measurable aviation contribution. Use the Aviation toggle on the map above to isolate the airport's footprint.
How Noise Is Distributed Across Beaver Hills
The bar chart below shows the share of Beaver Hills residents in each noise band. About 39% of residents live below the EPA's 55 dBA threshold, and roughly 11% live in blocks above 60 dBA. Long-term exposure in that range is linked to elevated stress hormones and cardiovascular risk.
How Beaver Hills Compares
Beaver Hills sits at the louder end of the spectrum. Below: how Beaver Hills's average outdoor noise and share of residents above the EPA threshold compare with Dwight, Hamden Plains, Dixwell, and West Rock.
Average noise level (dBA)
Beaver Hills's 56.0 dBA pop-weighted average is at the louder end of the spectrum. Connecticut as a whole averages 51.3 dBA and the U.S. averages 52.0 dBA. Both are lower than Beaver Hills because most of either area is rural land away from major roads.
Share of residents above 55 dBA
About 51.0% of Beaver Hills residents live in blocks where outdoor levels exceed the EPA's 55 dBA threshold. That's in the middle of its peer group. Measured by land area instead, 48.5% of Beaver Hills's footprint sits above 55 dBA, against a Connecticut average of 27.3% and a national average of 28.1%.
What This Means if You're Moving to Beaver Hills
Distance from highways matters more than the neighborhood name. Two homes in the same zip code can differ by 20 dBA if one sits 100 meters from Ellsworth Av and the other 500 meters away. The model captures this at 100-meter resolution, so noise exposure changes block by block.
Tree canopy can help reduce modeled noise exposure. Roughly 39% of Beaver Hills is under tree cover (much heavier than most neighborhoods), and the dominant land cover is low-intensity developed land. Both are measured from federal USDA Forest Service and USGS satellite imagery at 30-meter resolution. Streets with 60% or higher canopy show 3 to 5 dBA lower noise than comparable streets with bare ground or pavement, which is why the per-place decay rate above already accounts for it.
Airport noise is directional. Tweed/New Haven's approach paths concentrate aviation noise to the southeast. Neighborhoods to the northwest of downtown show no measurable contribution from the airport.
Sources & Methodology
The BestNeighborhood noise model is calibrated against nearly one million federal ground-truth measurements across four states. Road noise is computed from segment-level federal traffic data and propagated outward using physics-based acoustic decay, with attenuation rates that depend on the surrounding land cover.
All inputs are published federal datasets. Block-level noise is computed by combining road, rail, and aviation sound sources in the energy domain, the same physics used in professional environmental noise assessments. Read the full methodology.
