Noise Levels in Bel Air South, MD | Find Quiet Neighborhoods With Our Sound Map
52 dBA
Average noise across Bel Air South
Quiet office to normal conversation
10,348
Residents above the EPA 55 dBA threshold
22% of Bel Air South residents
82 dBA
Loudest residential point
Food blender at arm’s length
This map shows modeled outdoor noise across Bel Air South at 100-meter resolution, combining road, aviation, and rail sources. Green areas measure below 45 dBA. Orange and red exceed the EPA's 55 dBA outdoor threshold linked to long-term health effects. Use the layer toggles to view each source on its own or all together.
Overall
Road
Rail
Aviation
Click the map to explore
35 dBa55 dBa (EPA limit)90+ dBa
3545557090
Quietest (dBA)Loudest
Colorblind friendlyoff
What the numbers sound like
30 dBAWhisper
40 dBASoft rainfall
45 dBAQuiet suburban street at night
50 dBAQuiet office
55 dBAEPA outdoor threshold: light traffic 100 ft away
60 dBANormal conversation an arm's length away
65 dBABusy restaurant
70 dBAHighway traffic 50 ft away
80 dBACity bus interior
Population Above the EPA Outdoor Threshold
The EPA's 55 dBA outdoor reference level is a common benchmark for residential noise exposure, especially for activity interference, annoyance, and long-term community noise concerns. About 10,348 Bel Air South residents, or 22.3%, live above that level. By land area, 27.9% of Bel Air South is above 55 dBA.
Average noise levels for Bel Air South residents, grouped by direction from the center of Bel Air South. Southern Bel Air South carries the highest population-weighted average; Northern Bel Air South carries the lowest. Just 17% of residents in Northern Bel Air South live in blocks above the EPA's 55 dBA threshold, about two-thirds of the share in Southern Bel Air South.
Central Bel Air South
51.5 dBA · Moderate
Quiet office to normal conversation
24% of people above 55 dBA
QuietLoud
Eastern Bel Air South
50.6 dBA · Moderate
Quiet office
16% of people above 55 dBA
QuietLoud
Northern Bel Air South
50.6 dBA · Moderate
Quiet office
17% of people above 55 dBA
QuietLoud
Southern Bel Air South
54.3 dBA · Moderate-loud
Quiet office to normal conversation
29% of people above 55 dBA
QuietLoud
Western Bel Air South
50.9 dBA · Moderate
Quiet office
18% of people above 55 dBA
QuietLoud
Southern Bel Air South sounds about 29% louder than Northern Bel Air South to the human ear, a 3.7 dBA gap. Every 10 dBA roughly doubles perceived loudness. Within any of these directions, two homes a quarter mile apart can still differ by 10 or more dBA depending on how close they sit to a major highway.
How far back from I-95 do you need to be?
I-95 produces an estimated 78 dBA at its loudest centerline points. Noise drops logarithmically with distance, with the exact rate depending on what's between you and the road. Tree cover, walls, terrain, and pavement type all matter. At roughly a quarter mile back, traffic fades into the noise level of a quiet suburban street at night.
At source
78 dBA
City bus interior
165 ft
65 dBA
Busy restaurant
330 ft
57 dBA
Normal conversation an arm’s length away
660 ft
50 dBA
Quiet office
¼ mile
42 dBA
Quiet suburban street at night
½ mile
35 dBA
Soft rainfall
Calculated from the model's calibrated attenuation formula. About 37% of Bel Air South sits under tree canopy (about average for cities) and roughly 31% is impervious surface like pavement and rooftops. Both are folded into the per-place decay rate above. Heavier canopy pulls noise down faster with distance; impervious surfaces slow the drop.
-->
Airport Noise
Baltimore/Washington International Thurgood Marshall (BWI) sits southwest of Bel Air South. The U.S. Department of Transportation measures aviation noise around this airport directly, and the model uses those federal measurements rather than synthetic predictions.
Blocks under the approach and departure paths carry combined road-plus-aviation noise, with some exceeding 75 dBA on the map's Overall layer. Blocks on the opposite side of Bel Air South, particularly to the northeast, show no measurable aviation contribution. Use the Aviation toggle on the map above to isolate the airport's footprint.
How Noise Is Distributed Across Bel Air South
The bar chart below shows the share of Bel Air South residents in each noise band. About 77% of residents live below the EPA's 55 dBA threshold, and roughly 7% live in blocks above 60 dBA. Long-term exposure in that range is linked to elevated stress hormones and cardiovascular risk.
How Bel Air South Compares
Bel Air South sits at the quieter end of the spectrum. Below: how Bel Air South's average outdoor noise and share of residents above the EPA threshold compare with Bel Air North, Perry Hall, Towson, and Parkville.
Average noise level (dBA)
Bel Air South's 52.3 dBA pop-weighted average is at the quieter end of the spectrum. Maryland as a whole averages 52.3 dBA and the U.S. averages 52.0 dBA. Both are lower than Bel Air South because most of either area is rural land away from major roads.
Share of residents above 55 dBA
About 22.3% of Bel Air South residents live in blocks where outdoor levels exceed the EPA's 55 dBA threshold. That's in the middle of its peer group. Measured by land area instead, 27.9% of Bel Air South's footprint sits above 55 dBA, against a Maryland average of 32.9% and a national average of 28.1%.
What This Means if You're Moving to Bel Air South
Distance from highways matters more than the neighborhood name. Two homes in the same zip code can differ by 20 dBA if one sits 100 meters from I-95 and the other 500 meters away. The model captures this at 100-meter resolution, so noise exposure changes block by block.
Tree canopy can help reduce modeled noise exposure. Roughly 37% of Bel Air South is under tree cover (about average for cities), and the dominant land cover is low-intensity developed land. Both are measured from federal USDA Forest Service and USGS satellite imagery at 30-meter resolution. Streets with 60% or higher canopy show 3 to 5 dBA lower noise than comparable streets with bare ground or pavement, which is why the per-place decay rate above already accounts for it.
Airport noise is directional. Baltimore/Washington International Thurgood Marshall's approach paths concentrate aviation noise to the southwest. Neighborhoods to the northeast of downtown show no measurable contribution from the airport.
Sources & Methodology
The BestNeighborhood noise model is calibrated against nearly one million federal ground-truth measurements across four states. Road noise is computed from segment-level federal traffic data and propagated outward using physics-based acoustic decay, with attenuation rates that depend on the surrounding land cover.
All inputs are published federal datasets. Block-level noise is computed by combining road, rail, and aviation sound sources in the energy domain, the same physics used in professional environmental noise assessments. Read the full methodology.
