Noise Levels in Cane Ridge, Antioch, TN | Find Quiet Neighborhoods With Our Sound Map
51 dBA
Average noise across Cane Ridge
Quiet office
1,337
Residents above the EPA 55 dBA threshold
16% of Cane Ridge residents
69 dBA
Loudest residential point
Highway traffic 50 ft away
This map shows modeled outdoor noise across Cane Ridge at 100-meter resolution, combining road, aviation, and rail sources. Green areas measure below 45 dBA. Orange and red exceed the EPA's 55 dBA outdoor threshold linked to long-term health effects. Use the layer toggles to view each source on its own or all together.
Overall
Road
Rail
Aviation
Click the map to explore
35 dBa55 dBa (EPA limit)90+ dBa
3545557090
Quietest (dBA)Loudest
Colorblind friendlyoff
What the numbers sound like
30 dBAWhisper
40 dBASoft rainfall
45 dBAQuiet suburban street at night
50 dBAQuiet office
55 dBAEPA outdoor threshold: light traffic 100 ft away
60 dBANormal conversation an arm's length away
65 dBABusy restaurant
70 dBAHighway traffic 50 ft away
80 dBACity bus interior
Population Above the EPA Outdoor Threshold
The EPA's 55 dBA outdoor reference level is a common benchmark for residential noise exposure, especially for activity interference, annoyance, and long-term community noise concerns. About 1,337 Cane Ridge residents, or 16.3%, live above that level. By land area, 19.5% of Cane Ridge is above 55 dBA.
Average noise levels for Cane Ridge residents, grouped by direction from the center of Cane Ridge. Southern Cane Ridge carries the highest population-weighted average; Eastern Cane Ridge carries the lowest. Just 3% of residents in Eastern Cane Ridge live in blocks above the EPA's 55 dBA threshold, a fifth of the share in Southern Cane Ridge.
Central Cane Ridge
51.0 dBA · Moderate
Quiet office
12% of people above 55 dBA
QuietLoud
Eastern Cane Ridge
46.5 dBA · Mostly quiet
Quiet office
3% of people above 55 dBA
QuietLoud
Northern Cane Ridge
49.8 dBA · Mostly quiet
Quiet office
16% of people above 55 dBA
QuietLoud
Southern Cane Ridge
51.9 dBA · Moderate
Quiet office to normal conversation
19% of people above 55 dBA
QuietLoud
Western Cane Ridge
50.9 dBA · Moderate
Quiet office
20% of people above 55 dBA
QuietLoud
Southern Cane Ridge sounds about 45% louder than Eastern Cane Ridge to the human ear, a 5.4 dBA gap. Every 10 dBA roughly doubles perceived loudness. Within any of these directions, two homes a quarter mile apart can still differ by 10 or more dBA depending on how close they sit to a major highway.
How far back from A178 do you need to be?
A178 produces an estimated 55 dBA at its loudest centerline points. Noise drops logarithmically with distance, with the exact rate depending on what's between you and the road. Tree cover, walls, terrain, and pavement type all matter. At roughly a quarter mile back, traffic fades into the noise level of a soft rainfall.
At source
55 dBA
Quiet office to normal conversation
165 ft
44 dBA
Quiet suburban street at night
330 ft
37 dBA
Soft rainfall
660 ft
35 dBA
Soft rainfall
¼ mile
35 dBA
Soft rainfall
½ mile
35 dBA
Soft rainfall
Calculated from the model's calibrated attenuation formula. About 37% of Cane Ridge sits under tree canopy (much heavier than most neighborhoods) and roughly 18% is impervious surface like pavement and rooftops. Both are folded into the per-place decay rate above. Heavier canopy pulls noise down faster with distance; impervious surfaces slow the drop.
-->
Airport Noise
Nashville International (BNA) sits north of Cane Ridge. The U.S. Department of Transportation measures aviation noise around this airport directly, and the model uses those federal measurements rather than synthetic predictions.
Blocks under the approach and departure paths carry combined road-plus-aviation noise, with some exceeding 50 dBA on the map's Overall layer. Blocks on the opposite side of Cane Ridge, particularly to the south, show no measurable aviation contribution. Use the Aviation toggle on the map above to isolate the airport's footprint.
How Noise Is Distributed Across Cane Ridge
The bar chart below shows the share of Cane Ridge residents in each noise band. About 81% of residents live below the EPA's 55 dBA threshold, and roughly 0% live in blocks above 60 dBA. Long-term exposure in that range is linked to elevated stress hormones and cardiovascular risk.
How Cane Ridge Compares
Cane Ridge sits at the quieter end of the spectrum. Below: how Cane Ridge's average outdoor noise and share of residents above the EPA threshold compare with Crieve Hall, McMurray-Huntingdon, Hillsboro West End, and West Meade.
Average noise level (dBA)
Cane Ridge's 50.6 dBA pop-weighted average is at the quieter end of the spectrum. Tennessee as a whole averages 49.2 dBA and the U.S. averages 52.0 dBA. Both are lower than Cane Ridge because most of either area is rural land away from major roads.
Share of residents above 55 dBA
About 16.3% of Cane Ridge residents live in blocks where outdoor levels exceed the EPA's 55 dBA threshold. That's in the middle of its peer group. Measured by land area instead, 19.5% of Cane Ridge's footprint sits above 55 dBA, against a Tennessee average of 18.7% and a national average of 28.1%.
What This Means if You're Moving to Cane Ridge
Distance from highways matters more than the neighborhood name. Two homes in the same zip code can differ by 20 dBA if one sits 100 meters from A178 and the other 500 meters away. The model captures this at 100-meter resolution, so noise exposure changes block by block.
Tree canopy can help reduce modeled noise exposure. Roughly 37% of Cane Ridge is under tree cover (much heavier than most neighborhoods), and the dominant land cover is deciduous forest. Both are measured from federal USDA Forest Service and USGS satellite imagery at 30-meter resolution. Streets with 60% or higher canopy show 3 to 5 dBA lower noise than comparable streets with bare ground or pavement, which is why the per-place decay rate above already accounts for it.
Airport noise is directional. Nashville International's approach paths concentrate aviation noise to the north. Neighborhoods to the south of downtown show no measurable contribution from the airport.
Sources & Methodology
The BestNeighborhood noise model is calibrated against nearly one million federal ground-truth measurements across four states. Road noise is computed from segment-level federal traffic data and propagated outward using physics-based acoustic decay, with attenuation rates that depend on the surrounding land cover.
All inputs are published federal datasets. Block-level noise is computed by combining road, rail, and aviation sound sources in the energy domain, the same physics used in professional environmental noise assessments. Read the full methodology.
