Noise Levels in Carmel, CA | Find Quiet Neighborhoods With Our Sound Map

49 dBA
Average noise across Carmel
Quiet office
2,008
Residents above the EPA 55 dBA threshold
19% of Carmel residents
80 dBA
Loudest residential point
City bus interior

This map shows modeled outdoor noise across Carmel at 100-meter resolution, combining road, aviation, and rail sources. Green areas measure below 45 dBA. Orange and red exceed the EPA's 55 dBA outdoor threshold linked to long-term health effects. Use the layer toggles to view each source on its own or all together.

Overall
Road
Rail
Aviation
Carmel, CA Map of Noise Levels in Carmel
Click the map to explore
35 45 55 70 90
Quietest (dBA) Loudest
Colorblind friendly off

What the numbers sound like

  • 30 dBAWhisper
  • 40 dBASoft rainfall
  • 45 dBAQuiet suburban street at night
  • 50 dBAQuiet office
  • 55 dBAEPA outdoor threshold: light traffic 100 ft away
  • 60 dBANormal conversation an arm's length away
  • 65 dBABusy restaurant
  • 70 dBAHighway traffic 50 ft away
  • 80 dBACity bus interior

Population Above the EPA Outdoor Threshold

The EPA's 55 dBA outdoor reference level is a common benchmark for residential noise exposure, especially for activity interference, annoyance, and long-term community noise concerns. About 2,008 Carmel residents, or 19.2%, live above that level. By land area, 27.2% of Carmel is above 55 dBA.

See how noise in Carmel compares to similar-sized cities.

Noise by Part of Carmel

Average noise levels for Carmel residents, grouped by direction from the center of Carmel. Western Carmel carries the highest population-weighted average; Southern Carmel carries the lowest. Just 11% of residents in Southern Carmel live in blocks above the EPA's 55 dBA threshold, about half the share in Western Carmel.

Central Carmel

48.1 dBA · Mostly quiet
Quiet office

7% of people above 55 dBA

QuietLoud

Eastern Carmel

44.6 dBA · Quiet
Quiet suburban street at night

4% of people above 55 dBA

QuietLoud

Northern Carmel

51.0 dBA · Moderate
Quiet office

21% of people above 55 dBA

QuietLoud

Southern Carmel

40.2 dBA · Quiet
Soft rainfall

11% of people above 55 dBA

QuietLoud

Western Carmel

52.0 dBA · Moderate
Quiet office to normal conversation

31% of people above 55 dBA

QuietLoud

Western Carmel sounds about 127% louder than Southern Carmel to the human ear, a 11.8 dBA gap. Every 10 dBA roughly doubles perceived loudness. Within any of these directions, two homes a quarter mile apart can still differ by 10 or more dBA depending on how close they sit to a major highway.

How far back from State Rte 1 do you need to be?

State Rte 1 produces an estimated 76 dBA at its loudest centerline points. Noise drops logarithmically with distance, with the exact rate depending on what's between you and the road. Tree cover, walls, terrain, and pavement type all matter. At roughly a quarter mile back, traffic fades into the noise level of a soft rainfall.

At source
76 dBA
City bus interior
165 ft
62 dBA
Busy restaurant
330 ft
55 dBA
Quiet office to normal conversation
660 ft
47 dBA
Quiet office
¼ mile
39 dBA
Soft rainfall
½ mile
35 dBA
Soft rainfall

Calculated from the model's calibrated attenuation formula. About 34% of Carmel sits under tree canopy (about average for cities) and roughly 16% is impervious surface like pavement and rooftops. Both are folded into the per-place decay rate above. Heavier canopy pulls noise down faster with distance; impervious surfaces slow the drop.

-->

How Noise Is Distributed Across Carmel

The bar chart below shows the share of Carmel residents in each noise band. About 82% of residents live below the EPA's 55 dBA threshold, and roughly 7% live in blocks above 60 dBA. Long-term exposure in that range is linked to elevated stress hormones and cardiovascular risk.

How Carmel Compares

Carmel sits the lowest among the peer group. Below: how Carmel's average outdoor noise and share of residents above the EPA threshold compare with Pacific Grove, Prunedale, Monterey, and Del Monte Forest.

Average noise level (dBA)

Carmel's 49.0 dBA pop-weighted average is the lowest among the peer group. California as a whole averages 54.0 dBA and the U.S. averages 52.0 dBA. Both are lower than Carmel because most of either area is rural land away from major roads.

Share of residents above 55 dBA

About 19.2% of Carmel residents live in blocks where outdoor levels exceed the EPA's 55 dBA threshold. That's in the middle of its peer group. Measured by land area instead, 27.2% of Carmel's footprint sits above 55 dBA, against a California average of 36.0% and a national average of 28.1%.

What This Means if You're Moving to Carmel

  • Distance from highways matters more than the neighborhood name. Two homes in the same zip code can differ by 20 dBA if one sits 100 meters from State Rte 1 and the other 500 meters away. The model captures this at 100-meter resolution, so noise exposure changes block by block.
  • Tree canopy can help reduce modeled noise exposure. Roughly 34% of Carmel is under tree cover (about average for cities), and the dominant land cover is low-intensity developed land. Both are measured from federal USDA Forest Service and USGS satellite imagery at 30-meter resolution. Streets with 60% or higher canopy show 3 to 5 dBA lower noise than comparable streets with bare ground or pavement, which is why the per-place decay rate above already accounts for it.

Sources & Methodology

The BestNeighborhood noise model is calibrated against nearly one million federal ground-truth measurements across four states. Road noise is computed from segment-level federal traffic data and propagated outward using physics-based acoustic decay, with attenuation rates that depend on the surrounding land cover.

Federal datasets used:

FHWA Highway Performance Monitoring System: road geometry, traffic counts, lane configuration
U.S. DoT Bureau of Transportation Statistics National Transportation Noise Map: aviation and rail noise, road calibration ground truth
USGS / MRLC National Land Cover Database: land cover and impervious surface coverage
USDA Forest Service Tree Canopy Cover: vegetation density for sound propagation
U.S. Census Bureau TIGER/Line: block-level geography and population
U.S. EPA Levels Document: 55 dBA outdoor reference level

All inputs are published federal datasets. Block-level noise is computed by combining road, rail, and aviation sound sources in the energy domain, the same physics used in professional environmental noise assessments. Read the full methodology.