Noise Levels in Central Beaverton, Beaverton, OR | Find Quiet Neighborhoods With Our Sound Map

57 dBA
Average noise across Central Beaverton
Normal conversation an arm’s length away
6,676
Residents above the EPA 55 dBA threshold
49% of Central Beaverton residents
79 dBA
Loudest residential point
City bus interior

This map shows modeled outdoor noise across Central Beaverton at 100-meter resolution, combining road, aviation, and rail sources. Green areas measure below 45 dBA. Orange and red exceed the EPA's 55 dBA outdoor threshold linked to long-term health effects. Use the layer toggles to view each source on its own or all together.

Overall
Road
Rail
Aviation
Central Beaverton, Beaverton, OR Map of Noise Levels in Central Beaverton
Click the map to explore
35 45 55 70 90
Quietest (dBA) Loudest
Colorblind friendly off

What the numbers sound like

  • 30 dBAWhisper
  • 40 dBASoft rainfall
  • 45 dBAQuiet suburban street at night
  • 50 dBAQuiet office
  • 55 dBAEPA outdoor threshold: light traffic 100 ft away
  • 60 dBANormal conversation an arm's length away
  • 65 dBABusy restaurant
  • 70 dBAHighway traffic 50 ft away
  • 80 dBACity bus interior

Population Above the EPA Outdoor Threshold

The EPA's 55 dBA outdoor reference level is a common benchmark for residential noise exposure, especially for activity interference, annoyance, and long-term community noise concerns. About 6,676 Central Beaverton residents, or 48.7%, live above that level. By land area, 64.5% of Central Beaverton is above 55 dBA.

See how noise in Central Beaverton compares to similar-sized neighborhoods.

Noise by Part of Central Beaverton

Average noise levels for Central Beaverton residents, grouped by direction from the center of Central Beaverton. Central Central Beaverton carries the highest population-weighted average; Southern Central Beaverton carries the lowest. Just 32% of residents in Southern Central Beaverton live in blocks above the EPA's 55 dBA threshold, about half the share in Central Central Beaverton.

Central Central Beaverton

60.5 dBA · Loud
Normal conversation an arm’s length away

75% of people above 55 dBA

QuietLoud

Eastern Central Beaverton

59.7 dBA · Loud
Normal conversation an arm’s length away

67% of people above 55 dBA

QuietLoud

Northern Central Beaverton

55.3 dBA · Moderate-loud
Quiet office to normal conversation

39% of people above 55 dBA

QuietLoud

Southern Central Beaverton

53.4 dBA · Moderate-loud
Quiet office to normal conversation

32% of people above 55 dBA

QuietLoud

Western Central Beaverton

58.1 dBA · Loud
Normal conversation an arm’s length away

50% of people above 55 dBA

QuietLoud

Central Central Beaverton sounds about 64% louder than Southern Central Beaverton to the human ear, a 7.1 dBA gap. Every 10 dBA roughly doubles perceived loudness. Within any of these directions, two homes a quarter mile apart can still differ by 10 or more dBA depending on how close they sit to a major highway.

How far back from Oregon Route 8 do you need to be?

Oregon Route 8 produces an estimated 67 dBA at its loudest centerline points. Noise drops logarithmically with distance, with the exact rate depending on what's between you and the road. Tree cover, walls, terrain, and pavement type all matter. At roughly a quarter mile back, traffic fades into the noise level of a soft rainfall.

At source
67 dBA
Highway traffic 50 ft away
165 ft
53 dBA
Quiet office to normal conversation
330 ft
45 dBA
Quiet suburban street at night
660 ft
37 dBA
Soft rainfall
¼ mile
35 dBA
Soft rainfall
½ mile
35 dBA
Soft rainfall

Calculated from the model's calibrated attenuation formula. About 24% of Central Beaverton sits under tree canopy (heavier than most neighborhoods) and roughly 55% is impervious surface like pavement and rooftops. Both are folded into the per-place decay rate above. Heavier canopy pulls noise down faster with distance; impervious surfaces slow the drop.

-->

Rail Noise

Active freight rail runs through parts of Central Beaverton. For most blocks the rail-only contribution is small. Combined road-plus-rail noise rarely exceeds road noise on its own. The exceptions are the handful of blocks within roughly a quarter mile of the right-of-way during pass-through hours.

Use the Rail toggle on the map above to isolate rail's contribution from road and aviation.

Airport Noise

Portland International (PDX) sits northeast of Central Beaverton. The U.S. Department of Transportation models aviation noise around this airport from federal traffic data, and the model uses those federal measurements rather than synthetic predictions.

Blocks under the approach and departure paths carry combined road-plus-aviation noise, with some exceeding 65 dBA on the map's Overall layer. Blocks on the opposite side of Central Beaverton, particularly to the southwest, show no measurable aviation contribution. Use the Aviation toggle on the map above to isolate the airport's footprint.

How Noise Is Distributed Across Central Beaverton

The bar chart below shows the share of Central Beaverton residents in each noise band. About 41% of residents live below the EPA's 55 dBA threshold, and roughly 27% live in blocks above 60 dBA. Long-term exposure in that range is linked to elevated stress hormones and cardiovascular risk.

How Central Beaverton Compares

Central Beaverton sits the highest among the peer group. Below: how Central Beaverton's average outdoor noise and share of residents above the EPA threshold compare with Cedar Hills-Cedar Mill, Cedar Hills-Cedar Mill North, Forest Park, and Neighbors Southwest.

Average noise level (dBA)

Central Beaverton's 56.9 dBA pop-weighted average is the highest among the peer group. Oregon as a whole averages 52.9 dBA and the U.S. averages 52.0 dBA. Both are lower than Central Beaverton because most of either area is rural land away from major roads.

Share of residents above 55 dBA

About 48.7% of Central Beaverton residents live in blocks where outdoor levels exceed the EPA's 55 dBA threshold. That's in the middle of its peer group. Measured by land area instead, 64.5% of Central Beaverton's footprint sits above 55 dBA, against a Oregon average of 24.2% and a national average of 28.1%.

What This Means if You're Moving to Central Beaverton

  • Distance from highways matters more than the neighborhood name. Two homes in the same zip code can differ by 20 dBA if one sits 100 meters from Oregon Route 8 and the other 500 meters away. The model captures this at 100-meter resolution, so noise exposure changes block by block.
  • Tree canopy can help reduce modeled noise exposure. Roughly 24% of Central Beaverton is under tree cover (heavier than most neighborhoods), and the dominant land cover is medium-intensity developed land. Both are measured from federal USDA Forest Service and USGS satellite imagery at 30-meter resolution. Streets with 60% or higher canopy show 3 to 5 dBA lower noise than comparable streets with bare ground or pavement, which is why the per-place decay rate above already accounts for it.
  • Airport noise is directional. Portland International's approach paths concentrate aviation noise to the northeast. Neighborhoods to the southwest of downtown show no measurable contribution from the airport.

Sources & Methodology

The BestNeighborhood noise model is calibrated against nearly one million federal ground-truth measurements across four states. Road noise is computed from segment-level federal traffic data and propagated outward using physics-based acoustic decay, with attenuation rates that depend on the surrounding land cover.

Federal datasets used:

FHWA Highway Performance Monitoring System: road geometry, traffic counts, lane configuration
U.S. DoT Bureau of Transportation Statistics National Transportation Noise Map: aviation and rail noise, road calibration ground truth
USGS / MRLC National Land Cover Database: land cover and impervious surface coverage
USDA Forest Service Tree Canopy Cover: vegetation density for sound propagation
U.S. Census Bureau TIGER/Line: block-level geography and population
U.S. EPA Levels Document: 55 dBA outdoor reference level

All inputs are published federal datasets. Block-level noise is computed by combining road, rail, and aviation sound sources in the energy domain, the same physics used in professional environmental noise assessments. Read the full methodology.