Noise Levels in Cutten, Eureka, CA | Find Quiet Neighborhoods With Our Sound Map

48 dBA
Average noise across Cutten
Quiet office
725
Residents above the EPA 55 dBA threshold
13% of Cutten residents
61 dBA
Loudest residential point
Normal conversation an arm’s length away

This map shows modeled outdoor noise across Cutten at 100-meter resolution, combining road, aviation, and rail sources. Green areas measure below 45 dBA. Orange and red exceed the EPA's 55 dBA outdoor threshold linked to long-term health effects. Use the layer toggles to view each source on its own or all together.

Overall
Road
Rail
Aviation
Cutten, Eureka, CA Map of Noise Levels in Cutten
Click the map to explore
35 45 55 70 90
Quietest (dBA) Loudest
Colorblind friendly off

What the numbers sound like

  • 30 dBAWhisper
  • 40 dBASoft rainfall
  • 45 dBAQuiet suburban street at night
  • 50 dBAQuiet office
  • 55 dBAEPA outdoor threshold: light traffic 100 ft away
  • 60 dBANormal conversation an arm's length away
  • 65 dBABusy restaurant
  • 70 dBAHighway traffic 50 ft away
  • 80 dBACity bus interior

Population Above the EPA Outdoor Threshold

The EPA's 55 dBA outdoor reference level is a common benchmark for residential noise exposure, especially for activity interference, annoyance, and long-term community noise concerns. About 725 Cutten residents, or 13.1%, live above that level. By land area, 17.0% of Cutten is above 55 dBA.

See how noise in Cutten compares to similar-sized neighborhoods.

Noise by Part of Cutten

Average noise levels for Cutten residents, grouped by direction from the center of Cutten. Northern Cutten carries the highest population-weighted average; Eastern Cutten carries the lowest. Just 3% of residents in Eastern Cutten live in blocks above the EPA's 55 dBA threshold, a fifth of the share in Northern Cutten.

Central Cutten

48.5 dBA · Mostly quiet
Quiet office

18% of people above 55 dBA

QuietLoud

Eastern Cutten

43.9 dBA · Quiet
Quiet suburban street at night

3% of people above 55 dBA

QuietLoud

Northern Cutten

50.0 dBA · Moderate
Quiet office

19% of people above 55 dBA

QuietLoud

Southern Cutten

44.8 dBA · Quiet
Quiet suburban street at night

5% of people above 55 dBA

QuietLoud

Western Cutten

45.3 dBA · Mostly quiet
Quiet suburban street at night

1% of people above 55 dBA

QuietLoud

Northern Cutten sounds about 53% louder than Eastern Cutten to the human ear, a 6.1 dBA gap. Every 10 dBA roughly doubles perceived loudness. Within any of these directions, two homes a quarter mile apart can still differ by 10 or more dBA depending on how close they sit to a major highway.

How far back from do you need to be?

produces an estimated 61 dBA at its loudest centerline points. Noise drops logarithmically with distance, with the exact rate depending on what's between you and the road. Tree cover, walls, terrain, and pavement type all matter. At roughly a quarter mile back, traffic fades into the noise level of a soft rainfall.

At source
61 dBA
Normal conversation an arm’s length away
165 ft
50 dBA
Quiet office
330 ft
44 dBA
Quiet suburban street at night
660 ft
38 dBA
Soft rainfall
¼ mile
35 dBA
Soft rainfall
½ mile
35 dBA
Soft rainfall

Calculated from the model's calibrated attenuation formula. About 41% of Cutten sits under tree canopy (much heavier than most neighborhoods) and roughly 28% is impervious surface like pavement and rooftops. Both are folded into the per-place decay rate above. Heavier canopy pulls noise down faster with distance; impervious surfaces slow the drop.

-->

How Noise Is Distributed Across Cutten

The bar chart below shows the share of Cutten residents in each noise band. About 95% of residents live below the EPA's 55 dBA threshold, and roughly 0% live in blocks above 60 dBA. Long-term exposure in that range is linked to elevated stress hormones and cardiovascular risk.

How Cutten Compares

Cutten sits the lowest among the peer group. Below: how Cutten's average outdoor noise and share of residents above the EPA threshold compare with South Bay, Old Town, Rohnerville, and The West Side.

Average noise level (dBA)

Cutten's 47.9 dBA pop-weighted average is the lowest among the peer group. California as a whole averages 54.0 dBA and the U.S. averages 52.0 dBA. Both are lower than Cutten because most of either area is rural land away from major roads.

Share of residents above 55 dBA

About 13.1% of Cutten residents live in blocks where outdoor levels exceed the EPA's 55 dBA threshold. That's fewer than any of its peer group. Measured by land area instead, 17.0% of Cutten's footprint sits above 55 dBA, against a California average of 36.0% and a national average of 28.1%.

What This Means if You're Moving to Cutten

  • Distance from highways matters more than the neighborhood name. Two homes in the same zip code can differ by 20 dBA if one sits 100 meters from and the other 500 meters away. The model captures this at 100-meter resolution, so noise exposure changes block by block.
  • Tree canopy can help reduce modeled noise exposure. Roughly 41% of Cutten is under tree cover (much heavier than most neighborhoods), and the dominant land cover is evergreen forest. Both are measured from federal USDA Forest Service and USGS satellite imagery at 30-meter resolution. Streets with 60% or higher canopy show 3 to 5 dBA lower noise than comparable streets with bare ground or pavement, which is why the per-place decay rate above already accounts for it.

Sources & Methodology

The BestNeighborhood noise model is calibrated against nearly one million federal ground-truth measurements across four states. Road noise is computed from segment-level federal traffic data and propagated outward using physics-based acoustic decay, with attenuation rates that depend on the surrounding land cover.

Federal datasets used:

FHWA Highway Performance Monitoring System: road geometry, traffic counts, lane configuration
U.S. DoT Bureau of Transportation Statistics National Transportation Noise Map: aviation and rail noise, road calibration ground truth
USGS / MRLC National Land Cover Database: land cover and impervious surface coverage
USDA Forest Service Tree Canopy Cover: vegetation density for sound propagation
U.S. Census Bureau TIGER/Line: block-level geography and population
U.S. EPA Levels Document: 55 dBA outdoor reference level

All inputs are published federal datasets. Block-level noise is computed by combining road, rail, and aviation sound sources in the energy domain, the same physics used in professional environmental noise assessments. Read the full methodology.