Noise Levels in Daytona Beach Shores, FL | Find Quiet Neighborhoods With Our Sound Map

57 dBA
Average noise across Daytona Beach Shores
Normal conversation an arm’s length away
2,551
Residents above the EPA 55 dBA threshold
51% of Daytona Beach Shores residents
68 dBA
Loudest residential point
Highway traffic 50 ft away

This map shows modeled outdoor noise across Daytona Beach Shores at 100-meter resolution, combining road, aviation, and rail sources. Green areas measure below 45 dBA. Orange and red exceed the EPA's 55 dBA outdoor threshold linked to long-term health effects. Use the layer toggles to view each source on its own or all together.

Overall
Road
Rail
Aviation
Daytona Beach Shores, FL Map of Noise Levels in Daytona Beach Shores
Click the map to explore
35 45 55 70 90
Quietest (dBA) Loudest
Colorblind friendly off

What the numbers sound like

  • 30 dBAWhisper
  • 40 dBASoft rainfall
  • 45 dBAQuiet suburban street at night
  • 50 dBAQuiet office
  • 55 dBAEPA outdoor threshold: light traffic 100 ft away
  • 60 dBANormal conversation an arm's length away
  • 65 dBABusy restaurant
  • 70 dBAHighway traffic 50 ft away
  • 80 dBACity bus interior

Population Above the EPA Outdoor Threshold

The EPA's 55 dBA outdoor reference level is a common benchmark for residential noise exposure, especially for activity interference, annoyance, and long-term community noise concerns. About 2,551 Daytona Beach Shores residents, or 50.8%, live above that level. By land area, 35.9% of Daytona Beach Shores is above 55 dBA.

See how noise in Daytona Beach Shores compares to similar-sized cities.

Noise by Part of Daytona Beach Shores

Average noise levels for Daytona Beach Shores residents, grouped by direction from the center of Daytona Beach Shores. Northern Daytona Beach Shores carries the highest population-weighted average; Western Daytona Beach Shores carries the lowest. Just 0% of residents in Western Daytona Beach Shores live in blocks above the EPA's 55 dBA threshold, a fifth of the share in Northern Daytona Beach Shores.

Central Daytona Beach Shores

57.7 dBA · Moderate-loud
Normal conversation an arm’s length away

55% of people above 55 dBA

QuietLoud

Northern Daytona Beach Shores

58.5 dBA · Loud
Normal conversation an arm’s length away

52% of people above 55 dBA

QuietLoud

Southern Daytona Beach Shores

54.5 dBA · Moderate-loud
Quiet office to normal conversation

45% of people above 55 dBA

QuietLoud

Western Daytona Beach Shores

47.1 dBA · Mostly quiet
Quiet office

0% of people above 55 dBA

QuietLoud

Northern Daytona Beach Shores sounds about 120% louder than Western Daytona Beach Shores to the human ear, a 11.4 dBA gap. Every 10 dBA roughly doubles perceived loudness. Within any of these directions, two homes a quarter mile apart can still differ by 10 or more dBA depending on how close they sit to a major highway.

How far back from S Atlantic Ave do you need to be?

S Atlantic Ave produces an estimated 65 dBA at its loudest centerline points. Noise drops logarithmically with distance, with the exact rate depending on what's between you and the road. Tree cover, walls, terrain, and pavement type all matter. At roughly a quarter mile back, traffic fades into the noise level of a soft rainfall.

At source
65 dBA
Busy restaurant
165 ft
50 dBA
Quiet office
330 ft
42 dBA
Quiet suburban street at night
660 ft
35 dBA
Soft rainfall
¼ mile
35 dBA
Soft rainfall
½ mile
35 dBA
Soft rainfall

Calculated from the model's calibrated attenuation formula. About 2% of Daytona Beach Shores sits under tree canopy (much lighter than most cities) and roughly 77% is impervious surface like pavement and rooftops. Both are folded into the per-place decay rate above. Heavier canopy pulls noise down faster with distance; impervious surfaces slow the drop.

-->

How Noise Is Distributed Across Daytona Beach Shores

The bar chart below shows the share of Daytona Beach Shores residents in each noise band. About 47% of residents live below the EPA's 55 dBA threshold, and roughly 46% live in blocks above 60 dBA. Long-term exposure in that range is linked to elevated stress hormones and cardiovascular risk.

How Daytona Beach Shores Compares

Daytona Beach Shores sits the highest among the peer group. Below: how Daytona Beach Shores's average outdoor noise and share of residents above the EPA threshold compare with Ponce Inlet, Ormond-by-the-Sea, Lake Helen, and DeLeon Springs.

Average noise level (dBA)

Daytona Beach Shores's 56.8 dBA pop-weighted average is the highest among the peer group. Florida as a whole averages 51.6 dBA and the U.S. averages 52.0 dBA. Both are lower than Daytona Beach Shores because most of either area is rural land away from major roads.

Share of residents above 55 dBA

About 50.8% of Daytona Beach Shores residents live in blocks where outdoor levels exceed the EPA's 55 dBA threshold. That's more than any of its peer group. Measured by land area instead, 35.9% of Daytona Beach Shores's footprint sits above 55 dBA, against a Florida average of 31.8% and a national average of 28.1%.

What This Means if You're Moving to Daytona Beach Shores

  • Distance from highways matters more than the neighborhood name. Two homes in the same zip code can differ by 20 dBA if one sits 100 meters from S Atlantic Ave and the other 500 meters away. The model captures this at 100-meter resolution, so noise exposure changes block by block.
  • Tree canopy can help reduce modeled noise exposure. Roughly 2% of Daytona Beach Shores is under tree cover (much lighter than most cities), and the dominant land cover is high-intensity developed land. Both are measured from federal USDA Forest Service and USGS satellite imagery at 30-meter resolution. Streets with 60% or higher canopy show 3 to 5 dBA lower noise than comparable streets with bare ground or pavement, which is why the per-place decay rate above already accounts for it.

Sources & Methodology

The BestNeighborhood noise model is calibrated against nearly one million federal ground-truth measurements across four states. Road noise is computed from segment-level federal traffic data and propagated outward using physics-based acoustic decay, with attenuation rates that depend on the surrounding land cover.

Federal datasets used:

FHWA Highway Performance Monitoring System: road geometry, traffic counts, lane configuration
U.S. DoT Bureau of Transportation Statistics National Transportation Noise Map: aviation and rail noise, road calibration ground truth
USGS / MRLC National Land Cover Database: land cover and impervious surface coverage
USDA Forest Service Tree Canopy Cover: vegetation density for sound propagation
U.S. Census Bureau TIGER/Line: block-level geography and population
U.S. EPA Levels Document: 55 dBA outdoor reference level

All inputs are published federal datasets. Block-level noise is computed by combining road, rail, and aviation sound sources in the energy domain, the same physics used in professional environmental noise assessments. Read the full methodology.