Noise Levels in Diamond Heights, San Francisco, CA | Find Quiet Neighborhoods With Our Sound Map
53 dBA
Average noise across Diamond Heights
Quiet office to normal conversation
990
Residents above the EPA 55 dBA threshold
32% of Diamond Heights residents
66 dBA
Loudest residential point
Highway traffic 50 ft away
This map shows modeled outdoor noise across Diamond Heights at 100-meter resolution, combining road, aviation, and rail sources. Green areas measure below 45 dBA. Orange and red exceed the EPA's 55 dBA outdoor threshold linked to long-term health effects. Use the layer toggles to view each source on its own or all together.
Overall
Road
Rail
Aviation
Click the map to explore
35 dBa55 dBa (EPA limit)90+ dBa
3545557090
Quietest (dBA)Loudest
Colorblind friendlyoff
What the numbers sound like
30 dBAWhisper
40 dBASoft rainfall
45 dBAQuiet suburban street at night
50 dBAQuiet office
55 dBAEPA outdoor threshold: light traffic 100 ft away
60 dBANormal conversation an arm's length away
65 dBABusy restaurant
70 dBAHighway traffic 50 ft away
80 dBACity bus interior
Population Above the EPA Outdoor Threshold
The EPA's 55 dBA outdoor reference level is a common benchmark for residential noise exposure, especially for activity interference, annoyance, and long-term community noise concerns. About 990 Diamond Heights residents, or 32.5%, live above that level. By land area, 33.6% of Diamond Heights is above 55 dBA.
Average noise levels for Diamond Heights residents, grouped by direction from the center of Diamond Heights. Northern Diamond Heights carries the highest population-weighted average; Central Diamond Heights carries the lowest. Just 22% of residents in Central Diamond Heights live in blocks above the EPA's 55 dBA threshold, a third of the share in Northern Diamond Heights.
Central Diamond Heights
51.4 dBA · Moderate
Quiet office to normal conversation
22% of people above 55 dBA
QuietLoud
Northern Diamond Heights
60.4 dBA · Loud
Normal conversation an arm’s length away
76% of people above 55 dBA
QuietLoud
Southern Diamond Heights
53.2 dBA · Moderate-loud
Quiet office to normal conversation
43% of people above 55 dBA
QuietLoud
Northern Diamond Heights sounds about 87% louder than Central Diamond Heights to the human ear, a 9.0 dBA gap. Every 10 dBA roughly doubles perceived loudness. Within any of these directions, two homes a quarter mile apart can still differ by 10 or more dBA depending on how close they sit to a major highway.
How far back from do you need to be?
produces an estimated 66 dBA at its loudest centerline points. Noise drops logarithmically with distance, with the exact rate depending on what's between you and the road. Tree cover, walls, terrain, and pavement type all matter. At roughly a quarter mile back, traffic fades into the noise level of a soft rainfall.
At source
66 dBA
Highway traffic 50 ft away
165 ft
52 dBA
Quiet office to normal conversation
330 ft
44 dBA
Quiet suburban street at night
660 ft
36 dBA
Soft rainfall
¼ mile
35 dBA
Soft rainfall
½ mile
35 dBA
Soft rainfall
Calculated from the model's calibrated attenuation formula. About 12% of Diamond Heights sits under tree canopy (about average for neighborhoods) and roughly 52% is impervious surface like pavement and rooftops. Both are folded into the per-place decay rate above. Heavier canopy pulls noise down faster with distance; impervious surfaces slow the drop.
-->
Airport Noise
San Francisco International (SFO) sits south of Diamond Heights. The U.S. Department of Transportation measures aviation noise around this airport directly, and the model uses those federal measurements rather than synthetic predictions.
Blocks under the approach and departure paths carry combined road-plus-aviation noise, with some exceeding 75 dBA on the map's Overall layer. Blocks on the opposite side of Diamond Heights, particularly to the north, show no measurable aviation contribution. Use the Aviation toggle on the map above to isolate the airport's footprint.
How Noise Is Distributed Across Diamond Heights
The bar chart below shows the share of Diamond Heights residents in each noise band. About 76% of residents live below the EPA's 55 dBA threshold, and roughly 8% live in blocks above 60 dBA. Long-term exposure in that range is linked to elevated stress hormones and cardiovascular risk.
How Diamond Heights Compares
Diamond Heights sits the lowest among the peer group. Below: how Diamond Heights's average outdoor noise and share of residents above the EPA threshold compare with Downtown South San Francisco, Paradise Valley, Edgemar-Pacific Manor, and Fairmont.
Average noise level (dBA)
Diamond Heights's 52.7 dBA pop-weighted average is the lowest among the peer group. California as a whole averages 54.0 dBA and the U.S. averages 52.0 dBA. Both are lower than Diamond Heights because most of either area is rural land away from major roads.
Share of residents above 55 dBA
About 32.5% of Diamond Heights residents live in blocks where outdoor levels exceed the EPA's 55 dBA threshold. That's fewer than any of its peer group. Measured by land area instead, 33.6% of Diamond Heights's footprint sits above 55 dBA, against a California average of 36.0% and a national average of 28.1%.
What This Means if You're Moving to Diamond Heights
Distance from highways matters more than the neighborhood name. Two homes in the same zip code can differ by 20 dBA if one sits 100 meters from and the other 500 meters away. The model captures this at 100-meter resolution, so noise exposure changes block by block.
Tree canopy can help reduce modeled noise exposure. Roughly 12% of Diamond Heights is under tree cover (about average for neighborhoods), and the dominant land cover is medium-intensity developed land. Both are measured from federal USDA Forest Service and USGS satellite imagery at 30-meter resolution. Streets with 60% or higher canopy show 3 to 5 dBA lower noise than comparable streets with bare ground or pavement, which is why the per-place decay rate above already accounts for it.
Airport noise is directional. San Francisco International's approach paths concentrate aviation noise to the south. Neighborhoods to the north of downtown show no measurable contribution from the airport.
Sources & Methodology
The BestNeighborhood noise model is calibrated against nearly one million federal ground-truth measurements across four states. Road noise is computed from segment-level federal traffic data and propagated outward using physics-based acoustic decay, with attenuation rates that depend on the surrounding land cover.
All inputs are published federal datasets. Block-level noise is computed by combining road, rail, and aviation sound sources in the energy domain, the same physics used in professional environmental noise assessments. Read the full methodology.
