Noise Levels in East Benton, PA | Find Quiet Neighborhoods With Our Sound Map

44 dBA
Average noise across East Benton
Quiet suburban street at night
19
Residents above the EPA 55 dBA threshold
6% of East Benton residents
77 dBA
Loudest residential point
City bus interior

This map shows modeled outdoor noise across East Benton at 100-meter resolution, combining road, aviation, and rail sources. Green areas measure below 45 dBA. Orange and red exceed the EPA's 55 dBA outdoor threshold linked to long-term health effects. Use the layer toggles to view each source on its own or all together.

Overall
Road
Rail
Aviation
East Benton, PA Map of Noise Levels in East Benton
Click the map to explore
35 45 55 70 90
Quietest (dBA) Loudest
Colorblind friendly off

What the numbers sound like

  • 30 dBAWhisper
  • 40 dBASoft rainfall
  • 45 dBAQuiet suburban street at night
  • 50 dBAQuiet office
  • 55 dBAEPA outdoor threshold: light traffic 100 ft away
  • 60 dBANormal conversation an arm's length away
  • 65 dBABusy restaurant
  • 70 dBAHighway traffic 50 ft away
  • 80 dBACity bus interior

Population Above the EPA Outdoor Threshold

The EPA's 55 dBA outdoor reference level is a common benchmark for residential noise exposure, especially for activity interference, annoyance, and long-term community noise concerns. About 19 East Benton residents, or 6.5%, live above that level. By land area, 29.9% of East Benton is above 55 dBA.

See how noise in East Benton compares to similar-sized cities.

Noise by Part of East Benton

Average noise levels for East Benton residents, grouped by direction from the center of East Benton. Eastern East Benton carries the highest population-weighted average; Southern East Benton carries the lowest. Just 4% of residents in Southern East Benton live in blocks above the EPA's 55 dBA threshold, about half the share in Eastern East Benton.

Eastern East Benton

48.5 dBA · Mostly quiet
Quiet office

10% of people above 55 dBA

QuietLoud

Northern East Benton

47.4 dBA · Mostly quiet
Quiet office

9% of people above 55 dBA

QuietLoud

Southern East Benton

39.7 dBA · Quiet
Soft rainfall

4% of people above 55 dBA

QuietLoud

Western East Benton

40.0 dBA · Quiet
Soft rainfall

0% of people above 55 dBA

QuietLoud

Eastern East Benton sounds about 84% louder than Southern East Benton to the human ear, a 8.8 dBA gap. Every 10 dBA roughly doubles perceived loudness. Within any of these directions, two homes a quarter mile apart can still differ by 10 or more dBA depending on how close they sit to a major highway.

Loudest Road Corridors

The model evaluates every road in East Benton using federal traffic counts, posted speeds, heavy-truck ratios, and pavement type. The source level shown is the modeled noise at the road centerline, where it is loudest. Noise drops with distance, faster in vegetated areas and slower over open pavement.

RoadTypeAvg. source dBAPeak source dBA
American Legion Mem Hw Interstate 72.1 75
Cpwa Hack Rd Local 57.0 57
Wallsville Rd Minor collector 51.0 51

How far back from American Legion Mem Hw do you need to be?

American Legion Mem Hw produces an estimated 75 dBA at its loudest centerline points. Noise drops logarithmically with distance, with the exact rate depending on what's between you and the road. Tree cover, walls, terrain, and pavement type all matter. At roughly a quarter mile back, traffic fades into the noise level of a soft rainfall.

At source
75 dBA
City bus interior
165 ft
62 dBA
Busy restaurant
330 ft
54 dBA
Quiet office to normal conversation
660 ft
47 dBA
Quiet office
¼ mile
39 dBA
Soft rainfall
½ mile
35 dBA
Soft rainfall

Calculated from the model's calibrated attenuation formula. About 27% of East Benton sits under tree canopy (about average for cities) and roughly 0% is impervious surface like pavement and rooftops. Both are folded into the per-place decay rate above. Heavier canopy pulls noise down faster with distance; impervious surfaces slow the drop.

How Noise Is Distributed Across East Benton

The bar chart below shows the share of East Benton residents in each noise band. About 90% of residents live below the EPA's 55 dBA threshold, and roughly 6% live in blocks above 60 dBA. Long-term exposure in that range is linked to elevated stress hormones and cardiovascular risk.

How East Benton Compares

East Benton sits at the quieter end of the spectrum. Below: how East Benton's average outdoor noise and share of residents above the EPA threshold compare with Scott, West Lenox, Schultzville, and Lenoxville.

Average noise level (dBA)

East Benton's 44.0 dBA pop-weighted average is at the quieter end of the spectrum. Pennsylvania as a whole averages 52.9 dBA and the U.S. averages 52.0 dBA. Both are lower than East Benton because most of either area is rural land away from major roads.

Share of residents above 55 dBA

About 6.5% of East Benton residents live in blocks where outdoor levels exceed the EPA's 55 dBA threshold. That's in the middle of its peer group. Measured by land area instead, 29.9% of East Benton's footprint sits above 55 dBA, against a Pennsylvania average of 33.5% and a national average of 28.1%.

What This Means if You're Moving to East Benton

  • Distance from highways matters more than the neighborhood name. Two homes in the same zip code can differ by 20 dBA if one sits 100 meters from American Legion Mem Hw and the other 500 meters away. The model captures this at 100-meter resolution, so noise exposure changes block by block.
  • Tree canopy can help reduce modeled noise exposure. Roughly 27% of East Benton is under tree cover (about average for cities), and the dominant land cover is pasture / hay. Both are measured from federal USDA Forest Service and USGS satellite imagery at 30-meter resolution. Streets with 60% or higher canopy show 3 to 5 dBA lower noise than comparable streets with bare ground or pavement, which is why the per-place decay rate above already accounts for it.

Sources & Methodology

The BestNeighborhood noise model is calibrated against nearly one million federal ground-truth measurements across four states. Road noise is computed from segment-level federal traffic data and propagated outward using physics-based acoustic decay, with attenuation rates that depend on the surrounding land cover.

Federal datasets used:

FHWA Highway Performance Monitoring System: road geometry, traffic counts, lane configuration
U.S. DoT Bureau of Transportation Statistics National Transportation Noise Map: aviation and rail noise, road calibration ground truth
USGS / MRLC National Land Cover Database: land cover and impervious surface coverage
USDA Forest Service Tree Canopy Cover: vegetation density for sound propagation
U.S. Census Bureau TIGER/Line: block-level geography and population
U.S. EPA Levels Document: 55 dBA outdoor reference level

All inputs are published federal datasets. Block-level noise is computed by combining road, rail, and aviation sound sources in the energy domain, the same physics used in professional environmental noise assessments. Read the full methodology.