Noise Levels in Glens Falls, NY | Find Quiet Neighborhoods With Our Sound Map

54 dBA
Average noise across Glens Falls
Quiet office to normal conversation
4,716
Residents above the EPA 55 dBA threshold
35% of Glens Falls residents
71 dBA
Loudest residential point
Highway traffic 50 ft away

This map shows modeled outdoor noise across Glens Falls at 100-meter resolution, combining road, aviation, and rail sources. Green areas measure below 45 dBA. Orange and red exceed the EPA's 55 dBA outdoor threshold linked to long-term health effects. Use the layer toggles to view each source on its own or all together.

Overall
Road
Rail
Aviation
Glens Falls, NY Map of Noise Levels in Glens Falls
Click the map to explore
35 45 55 70 90
Quietest (dBA) Loudest
Colorblind friendly off

What the numbers sound like

  • 30 dBAWhisper
  • 40 dBASoft rainfall
  • 45 dBAQuiet suburban street at night
  • 50 dBAQuiet office
  • 55 dBAEPA outdoor threshold: light traffic 100 ft away
  • 60 dBANormal conversation an arm's length away
  • 65 dBABusy restaurant
  • 70 dBAHighway traffic 50 ft away
  • 80 dBACity bus interior

Population Above the EPA Outdoor Threshold

The EPA's 55 dBA outdoor reference level is a common benchmark for residential noise exposure, especially for activity interference, annoyance, and long-term community noise concerns. About 4,716 Glens Falls residents, or 35.3%, live above that level. By land area, 33.4% of Glens Falls is above 55 dBA.

See how noise in Glens Falls compares to similar-sized cities.

Noise by Part of Glens Falls

Average noise levels for Glens Falls residents, grouped by direction from the center of Glens Falls. Central Glens Falls carries the highest population-weighted average; Northern Glens Falls carries the lowest. Just 30% of residents in Northern Glens Falls live in blocks above the EPA's 55 dBA threshold, about half the share in Central Glens Falls.

Central Glens Falls

57.1 dBA · Moderate-loud
Normal conversation an arm’s length away

61% of people above 55 dBA

QuietLoud

Eastern Glens Falls

54.4 dBA · Moderate-loud
Quiet office to normal conversation

34% of people above 55 dBA

QuietLoud

Northern Glens Falls

53.8 dBA · Moderate-loud
Quiet office to normal conversation

30% of people above 55 dBA

QuietLoud

Southern Glens Falls

54.3 dBA · Moderate-loud
Quiet office to normal conversation

32% of people above 55 dBA

QuietLoud

Western Glens Falls

54.2 dBA · Moderate-loud
Quiet office to normal conversation

29% of people above 55 dBA

QuietLoud

Central Glens Falls sounds about 26% louder than Northern Glens Falls to the human ear, a 3.3 dBA gap. Every 10 dBA roughly doubles perceived loudness. Within any of these directions, two homes a quarter mile apart can still differ by 10 or more dBA depending on how close they sit to a major highway.

How far back from Glen St do you need to be?

Glen St produces an estimated 63 dBA at its loudest centerline points. Noise drops logarithmically with distance, with the exact rate depending on what's between you and the road. Tree cover, walls, terrain, and pavement type all matter. At roughly a quarter mile back, traffic fades into the noise level of a soft rainfall.

At source
63 dBA
Busy restaurant
165 ft
50 dBA
Quiet office
330 ft
42 dBA
Quiet suburban street at night
660 ft
35 dBA
Soft rainfall
¼ mile
35 dBA
Soft rainfall
½ mile
35 dBA
Soft rainfall

Calculated from the model's calibrated attenuation formula. About 29% of Glens Falls sits under tree canopy (about average for cities) and roughly 41% is impervious surface like pavement and rooftops. Both are folded into the per-place decay rate above. Heavier canopy pulls noise down faster with distance; impervious surfaces slow the drop.

-->

How Noise Is Distributed Across Glens Falls

The bar chart below shows the share of Glens Falls residents in each noise band. About 56% of residents live below the EPA's 55 dBA threshold, and roughly 7% live in blocks above 60 dBA. Long-term exposure in that range is linked to elevated stress hormones and cardiovascular risk.

How Glens Falls Compares

Glens Falls sits the highest among the peer group. Below: how Glens Falls's average outdoor noise and share of residents above the EPA threshold compare with Hudson Falls, Queensbury, Gansevoort, and South Glens Falls.

Average noise level (dBA)

Glens Falls's 54.5 dBA pop-weighted average is the highest among the peer group. New York as a whole averages 55.4 dBA and the U.S. averages 52.0 dBA. Both are lower than Glens Falls because most of either area is rural land away from major roads.

Share of residents above 55 dBA

About 35.3% of Glens Falls residents live in blocks where outdoor levels exceed the EPA's 55 dBA threshold. That's more than any of its peer group. Measured by land area instead, 33.4% of Glens Falls's footprint sits above 55 dBA, against a New York average of 30.9% and a national average of 28.1%.

What This Means if You're Moving to Glens Falls

  • Distance from highways matters more than the neighborhood name. Two homes in the same zip code can differ by 20 dBA if one sits 100 meters from Glen St and the other 500 meters away. The model captures this at 100-meter resolution, so noise exposure changes block by block.
  • Tree canopy can help reduce modeled noise exposure. Roughly 29% of Glens Falls is under tree cover (about average for cities), and the dominant land cover is low-intensity developed land. Both are measured from federal USDA Forest Service and USGS satellite imagery at 30-meter resolution. Streets with 60% or higher canopy show 3 to 5 dBA lower noise than comparable streets with bare ground or pavement, which is why the per-place decay rate above already accounts for it.

Sources & Methodology

The BestNeighborhood noise model is calibrated against nearly one million federal ground-truth measurements across four states. Road noise is computed from segment-level federal traffic data and propagated outward using physics-based acoustic decay, with attenuation rates that depend on the surrounding land cover.

Federal datasets used:

FHWA Highway Performance Monitoring System: road geometry, traffic counts, lane configuration
U.S. DoT Bureau of Transportation Statistics National Transportation Noise Map: aviation and rail noise, road calibration ground truth
USGS / MRLC National Land Cover Database: land cover and impervious surface coverage
USDA Forest Service Tree Canopy Cover: vegetation density for sound propagation
U.S. Census Bureau TIGER/Line: block-level geography and population
U.S. EPA Levels Document: 55 dBA outdoor reference level

All inputs are published federal datasets. Block-level noise is computed by combining road, rail, and aviation sound sources in the energy domain, the same physics used in professional environmental noise assessments. Read the full methodology.