Noise Levels in Kaseberg-Kingswood, Roseville, CA | Find Quiet Neighborhoods With Our Sound Map

54 dBA
Average noise across Kaseberg-Kingswood
Quiet office to normal conversation
1,440
Residents above the EPA 55 dBA threshold
34% of Kaseberg-Kingswood residents
81 dBA
Loudest residential point
Food blender at arm’s length

This map shows modeled outdoor noise across Kaseberg-Kingswood at 100-meter resolution, combining road, aviation, and rail sources. Green areas measure below 45 dBA. Orange and red exceed the EPA's 55 dBA outdoor threshold linked to long-term health effects. Use the layer toggles to view each source on its own or all together.

Overall
Road
Rail
Aviation
Kaseberg-Kingswood, Roseville, CA Map of Noise Levels in Kaseberg-Kingswood
Click the map to explore
35 45 55 70 90
Quietest (dBA) Loudest
Colorblind friendly off

What the numbers sound like

  • 30 dBAWhisper
  • 40 dBASoft rainfall
  • 45 dBAQuiet suburban street at night
  • 50 dBAQuiet office
  • 55 dBAEPA outdoor threshold: light traffic 100 ft away
  • 60 dBANormal conversation an arm's length away
  • 65 dBABusy restaurant
  • 70 dBAHighway traffic 50 ft away
  • 80 dBACity bus interior

Population Above the EPA Outdoor Threshold

The EPA's 55 dBA outdoor reference level is a common benchmark for residential noise exposure, especially for activity interference, annoyance, and long-term community noise concerns. About 1,440 Kaseberg-Kingswood residents, or 34.0%, live above that level. By land area, 35.5% of Kaseberg-Kingswood is above 55 dBA.

See how noise in Kaseberg-Kingswood compares to similar-sized neighborhoods.

Noise by Part of Kaseberg-Kingswood

Average noise levels for Kaseberg-Kingswood residents, grouped by direction from the center of Kaseberg-Kingswood. Western Kaseberg-Kingswood carries the highest population-weighted average; Central Kaseberg-Kingswood carries the lowest. Just 31% of residents in Central Kaseberg-Kingswood live in blocks above the EPA's 55 dBA threshold, roughly the same as the share in Western Kaseberg-Kingswood.

Central Kaseberg-Kingswood

52.3 dBA · Moderate
Quiet office to normal conversation

31% of people above 55 dBA

QuietLoud

Eastern Kaseberg-Kingswood

54.2 dBA · Moderate-loud
Quiet office to normal conversation

44% of people above 55 dBA

QuietLoud

Northern Kaseberg-Kingswood

56.2 dBA · Moderate-loud
Normal conversation an arm’s length away

30% of people above 55 dBA

QuietLoud

Southern Kaseberg-Kingswood

54.2 dBA · Moderate-loud
Quiet office to normal conversation

40% of people above 55 dBA

QuietLoud

Western Kaseberg-Kingswood

57.9 dBA · Moderate-loud
Normal conversation an arm’s length away

27% of people above 55 dBA

QuietLoud

Western Kaseberg-Kingswood sounds about 47% louder than Central Kaseberg-Kingswood to the human ear, a 5.6 dBA gap. Every 10 dBA roughly doubles perceived loudness. Within any of these directions, two homes a quarter mile apart can still differ by 10 or more dBA depending on how close they sit to a major highway.

How far back from do you need to be?

produces an estimated 81 dBA at its loudest centerline points. Noise drops logarithmically with distance, with the exact rate depending on what's between you and the road. Tree cover, walls, terrain, and pavement type all matter. At roughly a quarter mile back, traffic fades into the noise level of a quiet suburban street at night.

At source
81 dBA
Food blender at arm’s length
165 ft
67 dBA
Highway traffic 50 ft away
330 ft
58 dBA
Normal conversation an arm’s length away
660 ft
50 dBA
Quiet office
¼ mile
42 dBA
Quiet suburban street at night
½ mile
35 dBA
Soft rainfall

Calculated from the model's calibrated attenuation formula. About 8% of Kaseberg-Kingswood sits under tree canopy (lighter than most neighborhoods) and roughly 51% is impervious surface like pavement and rooftops. Both are folded into the per-place decay rate above. Heavier canopy pulls noise down faster with distance; impervious surfaces slow the drop.

-->

Rail Noise

Active freight rail runs through parts of Kaseberg-Kingswood. For most blocks the rail-only contribution is small. Combined road-plus-rail noise rarely exceeds road noise on its own. The exceptions are the handful of blocks within roughly a quarter mile of the right-of-way during pass-through hours.

Use the Rail toggle on the map above to isolate rail's contribution from road and aviation.

Airport Noise

Sacramento International (SMF) sits west of Kaseberg-Kingswood. The U.S. Department of Transportation models aviation noise around this airport from federal traffic data, and the model uses those federal measurements rather than synthetic predictions.

Blocks under the approach and departure paths carry combined road-plus-aviation noise, with some exceeding 65 dBA on the map's Overall layer. Blocks on the opposite side of Kaseberg-Kingswood, particularly to the east, show no measurable aviation contribution. Use the Aviation toggle on the map above to isolate the airport's footprint.

How Noise Is Distributed Across Kaseberg-Kingswood

The bar chart below shows the share of Kaseberg-Kingswood residents in each noise band. About 57% of residents live below the EPA's 55 dBA threshold, and roughly 0% live in blocks above 60 dBA. Long-term exposure in that range is linked to elevated stress hormones and cardiovascular risk.

How Kaseberg-Kingswood Compares

Kaseberg-Kingswood sits the highest among the peer group. Below: how Kaseberg-Kingswood's average outdoor noise and share of residents above the EPA threshold compare with East Roseville Parkway, Woodcreek Oaks, Stanford, and Blue Oaks.

Average noise level (dBA)

Kaseberg-Kingswood's 53.7 dBA pop-weighted average is the highest among the peer group. California as a whole averages 54.0 dBA and the U.S. averages 52.0 dBA. Both are lower than Kaseberg-Kingswood because most of either area is rural land away from major roads.

Share of residents above 55 dBA

About 34.0% of Kaseberg-Kingswood residents live in blocks where outdoor levels exceed the EPA's 55 dBA threshold. That's in the middle of its peer group. Measured by land area instead, 35.5% of Kaseberg-Kingswood's footprint sits above 55 dBA, against a California average of 36.0% and a national average of 28.1%.

What This Means if You're Moving to Kaseberg-Kingswood

  • Distance from highways matters more than the neighborhood name. Two homes in the same zip code can differ by 20 dBA if one sits 100 meters from and the other 500 meters away. The model captures this at 100-meter resolution, so noise exposure changes block by block.
  • Tree canopy can help reduce modeled noise exposure. Roughly 8% of Kaseberg-Kingswood is under tree cover (lighter than most neighborhoods), and the dominant land cover is medium-intensity developed land. Both are measured from federal USDA Forest Service and USGS satellite imagery at 30-meter resolution. Streets with 60% or higher canopy show 3 to 5 dBA lower noise than comparable streets with bare ground or pavement, which is why the per-place decay rate above already accounts for it.
  • Airport noise is directional. Sacramento International's approach paths concentrate aviation noise to the west. Neighborhoods to the east of downtown show no measurable contribution from the airport.

Sources & Methodology

The BestNeighborhood noise model is calibrated against nearly one million federal ground-truth measurements across four states. Road noise is computed from segment-level federal traffic data and propagated outward using physics-based acoustic decay, with attenuation rates that depend on the surrounding land cover.

Federal datasets used:

FHWA Highway Performance Monitoring System: road geometry, traffic counts, lane configuration
U.S. DoT Bureau of Transportation Statistics National Transportation Noise Map: aviation and rail noise, road calibration ground truth
USGS / MRLC National Land Cover Database: land cover and impervious surface coverage
USDA Forest Service Tree Canopy Cover: vegetation density for sound propagation
U.S. Census Bureau TIGER/Line: block-level geography and population
U.S. EPA Levels Document: 55 dBA outdoor reference level

All inputs are published federal datasets. Block-level noise is computed by combining road, rail, and aviation sound sources in the energy domain, the same physics used in professional environmental noise assessments. Read the full methodology.