Noise Levels in Lake Poinsett, SD | Find Quiet Neighborhoods With Our Sound Map

48 dBA
Average noise across Lake Poinsett
Quiet office
47
Residents above the EPA 55 dBA threshold
10% of Lake Poinsett residents
64 dBA
Loudest residential point
Busy restaurant

This map shows modeled outdoor noise across Lake Poinsett at 100-meter resolution, combining road, aviation, and rail sources. Green areas measure below 45 dBA. Orange and red exceed the EPA's 55 dBA outdoor threshold linked to long-term health effects. Use the layer toggles to view each source on its own or all together.

Overall
Road
Rail
Aviation
Lake Poinsett, SD Map of Noise Levels in Lake Poinsett
Click the map to explore
35 45 55 70 90
Quietest (dBA) Loudest
Colorblind friendly off

What the numbers sound like

  • 30 dBAWhisper
  • 40 dBASoft rainfall
  • 45 dBAQuiet suburban street at night
  • 50 dBAQuiet office
  • 55 dBAEPA outdoor threshold: light traffic 100 ft away
  • 60 dBANormal conversation an arm's length away
  • 65 dBABusy restaurant
  • 70 dBAHighway traffic 50 ft away
  • 80 dBACity bus interior

Population Above the EPA Outdoor Threshold

The EPA's 55 dBA outdoor reference level is a common benchmark for residential noise exposure, especially for activity interference, annoyance, and long-term community noise concerns. About 47 Lake Poinsett residents, or 9.6%, live above that level. By land area, 8.8% of Lake Poinsett is above 55 dBA.

See how noise in Lake Poinsett compares to similar-sized cities.

Noise by Part of Lake Poinsett

Average noise levels for Lake Poinsett residents, grouped by direction from the center of Lake Poinsett. Southern Lake Poinsett carries the highest population-weighted average; Eastern Lake Poinsett carries the lowest. Just 1% of residents in Eastern Lake Poinsett live in blocks above the EPA's 55 dBA threshold, a fifth of the share in Southern Lake Poinsett.

Eastern Lake Poinsett

43.0 dBA · Quiet
Quiet suburban street at night

1% of people above 55 dBA

QuietLoud

Northern Lake Poinsett

48.7 dBA · Mostly quiet
Quiet office

7% of people above 55 dBA

QuietLoud

Southern Lake Poinsett

53.5 dBA · Moderate-loud
Quiet office to normal conversation

24% of people above 55 dBA

QuietLoud

Western Lake Poinsett

50.7 dBA · Moderate
Quiet office

16% of people above 55 dBA

QuietLoud

Southern Lake Poinsett sounds about 107% louder than Eastern Lake Poinsett to the human ear, a 10.5 dBA gap. Every 10 dBA roughly doubles perceived loudness. Within any of these directions, two homes a quarter mile apart can still differ by 10 or more dBA depending on how close they sit to a major highway.

Loudest Road Corridors

The model evaluates every road in Lake Poinsett using federal traffic counts, posted speeds, heavy-truck ratios, and pavement type. The source level shown is the modeled noise at the road centerline, where it is loudest. Noise drops with distance, faster in vegetated areas and slower over open pavement.

RoadTypeAvg. source dBAPeak source dBA
Unknown Local 58.3 59
456 Ave Local 59.0 59
W Lake Dr Local 59.0 59
Northbay Dr Local 59.0 59
194 St Local 57.3 59

How far back from Unknown do you need to be?

Unknown produces an estimated 59 dBA at its loudest centerline points. Noise drops logarithmically with distance, with the exact rate depending on what's between you and the road. Tree cover, walls, terrain, and pavement type all matter. At roughly a quarter mile back, traffic fades into the noise level of a soft rainfall.

At source
59 dBA
Normal conversation an arm’s length away
165 ft
47 dBA
Quiet office
330 ft
40 dBA
Soft rainfall
660 ft
35 dBA
Soft rainfall
¼ mile
35 dBA
Soft rainfall
½ mile
35 dBA
Soft rainfall

Calculated from the model's calibrated attenuation formula. About 3% of Lake Poinsett sits under tree canopy (much lighter than most cities) and roughly 6% is impervious surface like pavement and rooftops. Both are folded into the per-place decay rate above. Heavier canopy pulls noise down faster with distance; impervious surfaces slow the drop.

How Noise Is Distributed Across Lake Poinsett

The bar chart below shows the share of Lake Poinsett residents in each noise band. About 92% of residents live below the EPA's 55 dBA threshold, and roughly 0% live in blocks above 60 dBA. Long-term exposure in that range is linked to elevated stress hormones and cardiovascular risk.

How Lake Poinsett Compares

Lake Poinsett sits at the louder end of the spectrum. Below: how Lake Poinsett's average outdoor noise and share of residents above the EPA threshold compare with Badger, Bruce, Foley, and Lake Norden.

Average noise level (dBA)

Lake Poinsett's 48.2 dBA pop-weighted average is at the louder end of the spectrum. South Dakota as a whole averages 52.6 dBA and the U.S. averages 52.0 dBA. Both are lower than Lake Poinsett because most of either area is rural land away from major roads.

Share of residents above 55 dBA

About 9.6% of Lake Poinsett residents live in blocks where outdoor levels exceed the EPA's 55 dBA threshold. That's in the middle of its peer group. Measured by land area instead, 8.8% of Lake Poinsett's footprint sits above 55 dBA, against a South Dakota average of 20.8% and a national average of 28.1%.

What This Means if You're Moving to Lake Poinsett

  • Distance from highways matters more than the neighborhood name. Two homes in the same zip code can differ by 20 dBA if one sits 100 meters from Unknown and the other 500 meters away. The model captures this at 100-meter resolution, so noise exposure changes block by block.
  • Tree canopy can help reduce modeled noise exposure. Roughly 3% of Lake Poinsett is under tree cover (much lighter than most cities), and the dominant land cover is pasture / hay. Both are measured from federal USDA Forest Service and USGS satellite imagery at 30-meter resolution. Streets with 60% or higher canopy show 3 to 5 dBA lower noise than comparable streets with bare ground or pavement, which is why the per-place decay rate above already accounts for it.

Sources & Methodology

The BestNeighborhood noise model is calibrated against nearly one million federal ground-truth measurements across four states. Road noise is computed from segment-level federal traffic data and propagated outward using physics-based acoustic decay, with attenuation rates that depend on the surrounding land cover.

Federal datasets used:

FHWA Highway Performance Monitoring System: road geometry, traffic counts, lane configuration
U.S. DoT Bureau of Transportation Statistics National Transportation Noise Map: aviation and rail noise, road calibration ground truth
USGS / MRLC National Land Cover Database: land cover and impervious surface coverage
USDA Forest Service Tree Canopy Cover: vegetation density for sound propagation
U.S. Census Bureau TIGER/Line: block-level geography and population
U.S. EPA Levels Document: 55 dBA outdoor reference level

All inputs are published federal datasets. Block-level noise is computed by combining road, rail, and aviation sound sources in the energy domain, the same physics used in professional environmental noise assessments. Read the full methodology.