Noise Levels in Lakeville, MA | Find Quiet Neighborhoods With Our Sound Map
50 dBA
Average noise across Lakeville
Quiet office
1,305
Residents above the EPA 55 dBA threshold
14% of Lakeville residents
76 dBA
Loudest residential point
City bus interior
This map shows modeled outdoor noise across Lakeville at 100-meter resolution, combining road, aviation, and rail sources. Green areas measure below 45 dBA. Orange and red exceed the EPA's 55 dBA outdoor threshold linked to long-term health effects. Use the layer toggles to view each source on its own or all together.
Overall
Road
Rail
Aviation
Click the map to explore
35 dBa55 dBa (EPA limit)90+ dBa
3545557090
Quietest (dBA)Loudest
Colorblind friendlyoff
What the numbers sound like
30 dBAWhisper
40 dBASoft rainfall
45 dBAQuiet suburban street at night
50 dBAQuiet office
55 dBAEPA outdoor threshold: light traffic 100 ft away
60 dBANormal conversation an arm's length away
65 dBABusy restaurant
70 dBAHighway traffic 50 ft away
80 dBACity bus interior
Population Above the EPA Outdoor Threshold
The EPA's 55 dBA outdoor reference level is a common benchmark for residential noise exposure, especially for activity interference, annoyance, and long-term community noise concerns. About 1,305 Lakeville residents, or 14.3%, live above that level. By land area, 20.5% of Lakeville is above 55 dBA.
Average noise levels for Lakeville residents, grouped by direction from the center of Lakeville. Southern Lakeville carries the highest population-weighted average; Eastern Lakeville carries the lowest. Just 8% of residents in Eastern Lakeville live in blocks above the EPA's 55 dBA threshold, about half the share in Southern Lakeville.
Eastern Lakeville
48.0 dBA · Mostly quiet
Quiet office
8% of people above 55 dBA
QuietLoud
Northern Lakeville
50.2 dBA · Moderate
Quiet office
15% of people above 55 dBA
QuietLoud
Southern Lakeville
51.2 dBA · Moderate
Quiet office to normal conversation
20% of people above 55 dBA
QuietLoud
Western Lakeville
48.9 dBA · Mostly quiet
Quiet office
10% of people above 55 dBA
QuietLoud
Southern Lakeville sounds about 25% louder than Eastern Lakeville to the human ear, a 3.2 dBA gap. Every 10 dBA roughly doubles perceived loudness. Within any of these directions, two homes a quarter mile apart can still differ by 10 or more dBA depending on how close they sit to a major highway.
How far back from State Hwy 140 do you need to be?
State Hwy 140 produces an estimated 73 dBA at its loudest centerline points. Noise drops logarithmically with distance, with the exact rate depending on what's between you and the road. Tree cover, walls, terrain, and pavement type all matter. At roughly a quarter mile back, traffic fades into the noise level of a soft rainfall.
At source
73 dBA
City bus interior
165 ft
60 dBA
Normal conversation an arm’s length away
330 ft
53 dBA
Quiet office to normal conversation
660 ft
46 dBA
Quiet suburban street at night
¼ mile
39 dBA
Soft rainfall
½ mile
35 dBA
Soft rainfall
Calculated from the model's calibrated attenuation formula. About 65% of Lakeville sits under tree canopy (much heavier than most cities) and roughly 6% is impervious surface like pavement and rooftops. Both are folded into the per-place decay rate above. Heavier canopy pulls noise down faster with distance; impervious surfaces slow the drop.
-->
Rail Noise
Active freight rail runs through parts of Lakeville. For most blocks the rail-only contribution is small. Combined road-plus-rail noise rarely exceeds road noise on its own. The exceptions are the handful of blocks within roughly a quarter mile of the right-of-way during pass-through hours.
Use the Rail toggle on the map above to isolate rail's contribution from road and aviation.
How Noise Is Distributed Across Lakeville
The bar chart below shows the share of Lakeville residents in each noise band. About 84% of residents live below the EPA's 55 dBA threshold, and roughly 5% live in blocks above 60 dBA. Long-term exposure in that range is linked to elevated stress hormones and cardiovascular risk.
How Lakeville Compares
Lakeville sits at the quieter end of the spectrum. Below: how Lakeville's average outdoor noise and share of residents above the EPA threshold compare with East Taunton, Acushnet, Middleborough Center, and Middleboro.
Average noise level (dBA)
Lakeville's 49.9 dBA pop-weighted average is at the quieter end of the spectrum. Massachusetts as a whole averages 54.3 dBA and the U.S. averages 52.0 dBA. Both are lower than Lakeville because most of either area is rural land away from major roads.
Share of residents above 55 dBA
About 14.3% of Lakeville residents live in blocks where outdoor levels exceed the EPA's 55 dBA threshold. That's fewer than any of its peer group. Measured by land area instead, 20.5% of Lakeville's footprint sits above 55 dBA, against a Massachusetts average of 40.0% and a national average of 28.1%.
What This Means if You're Moving to Lakeville
Distance from highways matters more than the neighborhood name. Two homes in the same zip code can differ by 20 dBA if one sits 100 meters from State Hwy 140 and the other 500 meters away. The model captures this at 100-meter resolution, so noise exposure changes block by block.
Tree canopy can help reduce modeled noise exposure. Roughly 65% of Lakeville is under tree cover (much heavier than most cities), and the dominant land cover is mixed forest. Both are measured from federal USDA Forest Service and USGS satellite imagery at 30-meter resolution. Streets with 60% or higher canopy show 3 to 5 dBA lower noise than comparable streets with bare ground or pavement, which is why the per-place decay rate above already accounts for it.
Sources & Methodology
The BestNeighborhood noise model is calibrated against nearly one million federal ground-truth measurements across four states. Road noise is computed from segment-level federal traffic data and propagated outward using physics-based acoustic decay, with attenuation rates that depend on the surrounding land cover.
All inputs are published federal datasets. Block-level noise is computed by combining road, rail, and aviation sound sources in the energy domain, the same physics used in professional environmental noise assessments. Read the full methodology.
