Noise Levels in McLoughlin, Oregon City, OR | Find Quiet Neighborhoods With Our Sound Map

55 dBA
Average noise across McLoughlin
Quiet office to normal conversation
1,308
Residents above the EPA 55 dBA threshold
50% of McLoughlin residents
91 dBA
Loudest residential point
Lawnmower at 1 m

This map shows modeled outdoor noise across McLoughlin at 100-meter resolution, combining road, aviation, and rail sources. Green areas measure below 45 dBA. Orange and red exceed the EPA's 55 dBA outdoor threshold linked to long-term health effects. Use the layer toggles to view each source on its own or all together.

Overall
Road
Rail
Aviation
McLoughlin, Oregon City, OR Map of Noise Levels in McLoughlin
Click the map to explore
35 45 55 70 90
Quietest (dBA) Loudest
Colorblind friendly off

What the numbers sound like

  • 30 dBAWhisper
  • 40 dBASoft rainfall
  • 45 dBAQuiet suburban street at night
  • 50 dBAQuiet office
  • 55 dBAEPA outdoor threshold: light traffic 100 ft away
  • 60 dBANormal conversation an arm's length away
  • 65 dBABusy restaurant
  • 70 dBAHighway traffic 50 ft away
  • 80 dBACity bus interior

Population Above the EPA Outdoor Threshold

The EPA's 55 dBA outdoor reference level is a common benchmark for residential noise exposure, especially for activity interference, annoyance, and long-term community noise concerns. About 1,308 McLoughlin residents, or 49.6%, live above that level. By land area, 54.0% of McLoughlin is above 55 dBA.

See how noise in McLoughlin compares to similar-sized neighborhoods.

Noise by Part of McLoughlin

Average noise levels for McLoughlin residents, grouped by direction from the center of McLoughlin. Eastern McLoughlin carries the highest population-weighted average; Southern McLoughlin carries the lowest. Just 22% of residents in Southern McLoughlin live in blocks above the EPA's 55 dBA threshold, about two-thirds of the share in Eastern McLoughlin.

Central McLoughlin

54.7 dBA · Moderate-loud
Quiet office to normal conversation

57% of people above 55 dBA

QuietLoud

Eastern McLoughlin

57.1 dBA · Moderate-loud
Normal conversation an arm’s length away

44% of people above 55 dBA

QuietLoud

Northern McLoughlin

55.6 dBA · Moderate-loud
Quiet office to normal conversation

38% of people above 55 dBA

QuietLoud

Southern McLoughlin

52.4 dBA · Moderate
Quiet office to normal conversation

22% of people above 55 dBA

QuietLoud

Western McLoughlin

54.1 dBA · Moderate-loud
Quiet office to normal conversation

50% of people above 55 dBA

QuietLoud

Eastern McLoughlin sounds about 39% louder than Southern McLoughlin to the human ear, a 4.7 dBA gap. Every 10 dBA roughly doubles perceived loudness. Within any of these directions, two homes a quarter mile apart can still differ by 10 or more dBA depending on how close they sit to a major highway.

How far back from Oregon Route 99E do you need to be?

Oregon Route 99E produces an estimated 68 dBA at its loudest centerline points. Noise drops logarithmically with distance, with the exact rate depending on what's between you and the road. Tree cover, walls, terrain, and pavement type all matter. At roughly a quarter mile back, traffic fades into the noise level of a soft rainfall.

At source
68 dBA
Highway traffic 50 ft away
165 ft
56 dBA
Quiet office to normal conversation
330 ft
49 dBA
Quiet office
660 ft
42 dBA
Quiet suburban street at night
¼ mile
35 dBA
Soft rainfall
½ mile
35 dBA
Soft rainfall

Calculated from the model's calibrated attenuation formula. About 36% of McLoughlin sits under tree canopy (much heavier than most neighborhoods) and roughly 43% is impervious surface like pavement and rooftops. Both are folded into the per-place decay rate above. Heavier canopy pulls noise down faster with distance; impervious surfaces slow the drop.

-->

Rail Noise

Active freight rail runs through parts of McLoughlin. For most blocks the rail-only contribution is small. Combined road-plus-rail noise rarely exceeds road noise on its own. The exceptions are the handful of blocks within roughly a quarter mile of the right-of-way during pass-through hours.

Use the Rail toggle on the map above to isolate rail's contribution from road and aviation.

Airport Noise

Portland International (PDX) sits north of McLoughlin. The U.S. Department of Transportation models aviation noise around this airport from federal traffic data, and the model uses those federal measurements rather than synthetic predictions.

Blocks under the approach and departure paths carry combined road-plus-aviation noise, with some exceeding 65 dBA on the map's Overall layer. Blocks on the opposite side of McLoughlin, particularly to the south, show no measurable aviation contribution. Use the Aviation toggle on the map above to isolate the airport's footprint.

How Noise Is Distributed Across McLoughlin

The bar chart below shows the share of McLoughlin residents in each noise band. About 44% of residents live below the EPA's 55 dBA threshold, and roughly 19% live in blocks above 60 dBA. Long-term exposure in that range is linked to elevated stress hormones and cardiovascular risk.

How McLoughlin Compares

McLoughlin sits the highest among the peer group. Below: how McLoughlin's average outdoor noise and share of residents above the EPA threshold compare with Hillendale, park-place-oregon-city-or, Gaffney Lane, and Hidden Springs.

Average noise level (dBA)

McLoughlin's 55.4 dBA pop-weighted average is the highest among the peer group. Oregon as a whole averages 52.9 dBA and the U.S. averages 52.0 dBA. Both are lower than McLoughlin because most of either area is rural land away from major roads.

Share of residents above 55 dBA

About 49.6% of McLoughlin residents live in blocks where outdoor levels exceed the EPA's 55 dBA threshold. That's more than any of its peer group. Measured by land area instead, 54.0% of McLoughlin's footprint sits above 55 dBA, against a Oregon average of 24.2% and a national average of 28.1%.

What This Means if You're Moving to McLoughlin

  • Distance from highways matters more than the neighborhood name. Two homes in the same zip code can differ by 20 dBA if one sits 100 meters from Oregon Route 99E and the other 500 meters away. The model captures this at 100-meter resolution, so noise exposure changes block by block.
  • Tree canopy can help reduce modeled noise exposure. Roughly 36% of McLoughlin is under tree cover (much heavier than most neighborhoods), and the dominant land cover is medium-intensity developed land. Both are measured from federal USDA Forest Service and USGS satellite imagery at 30-meter resolution. Streets with 60% or higher canopy show 3 to 5 dBA lower noise than comparable streets with bare ground or pavement, which is why the per-place decay rate above already accounts for it.
  • Airport noise is directional. Portland International's approach paths concentrate aviation noise to the north. Neighborhoods to the south of downtown show no measurable contribution from the airport.

Sources & Methodology

The BestNeighborhood noise model is calibrated against nearly one million federal ground-truth measurements across four states. Road noise is computed from segment-level federal traffic data and propagated outward using physics-based acoustic decay, with attenuation rates that depend on the surrounding land cover.

Federal datasets used:

FHWA Highway Performance Monitoring System: road geometry, traffic counts, lane configuration
U.S. DoT Bureau of Transportation Statistics National Transportation Noise Map: aviation and rail noise, road calibration ground truth
USGS / MRLC National Land Cover Database: land cover and impervious surface coverage
USDA Forest Service Tree Canopy Cover: vegetation density for sound propagation
U.S. Census Bureau TIGER/Line: block-level geography and population
U.S. EPA Levels Document: 55 dBA outdoor reference level

All inputs are published federal datasets. Block-level noise is computed by combining road, rail, and aviation sound sources in the energy domain, the same physics used in professional environmental noise assessments. Read the full methodology.