Noise Levels in Meadow Point, Wesley Chapel, FL | Find Quiet Neighborhoods With Our Sound Map
46 dBA
Average noise across Meadow Point
Quiet office
1,201
Residents above the EPA 55 dBA threshold
11% of Meadow Point residents
69 dBA
Loudest residential point
Highway traffic 50 ft away
This map shows modeled outdoor noise across Meadow Point at 100-meter resolution, combining road, aviation, and rail sources. Green areas measure below 45 dBA. Orange and red exceed the EPA's 55 dBA outdoor threshold linked to long-term health effects. Use the layer toggles to view each source on its own or all together.
Overall
Road
Rail
Aviation
Click the map to explore
35 dBa55 dBa (EPA limit)90+ dBa
3545557090
Quietest (dBA)Loudest
Colorblind friendlyoff
What the numbers sound like
30 dBAWhisper
40 dBASoft rainfall
45 dBAQuiet suburban street at night
50 dBAQuiet office
55 dBAEPA outdoor threshold: light traffic 100 ft away
60 dBANormal conversation an arm's length away
65 dBABusy restaurant
70 dBAHighway traffic 50 ft away
80 dBACity bus interior
Population Above the EPA Outdoor Threshold
The EPA's 55 dBA outdoor reference level is a common benchmark for residential noise exposure, especially for activity interference, annoyance, and long-term community noise concerns. About 1,201 Meadow Point residents, or 10.9%, live above that level. By land area, 26.2% of Meadow Point is above 55 dBA.
Average noise levels for Meadow Point residents, grouped by direction from the center of Meadow Point. Western Meadow Point carries the highest population-weighted average; Northern Meadow Point carries the lowest. Just 4% of residents in Northern Meadow Point live in blocks above the EPA's 55 dBA threshold, a third of the share in Western Meadow Point.
Eastern Meadow Point
45.2 dBA · Mostly quiet
Quiet suburban street at night
8% of people above 55 dBA
QuietLoud
Northern Meadow Point
41.0 dBA · Quiet
Soft rainfall
4% of people above 55 dBA
QuietLoud
Southern Meadow Point
41.7 dBA · Quiet
Quiet suburban street at night
0% of people above 55 dBA
QuietLoud
Western Meadow Point
49.3 dBA · Mostly quiet
Quiet office
17% of people above 55 dBA
QuietLoud
Western Meadow Point sounds about 78% louder than Northern Meadow Point to the human ear, a 8.3 dBA gap. Every 10 dBA roughly doubles perceived loudness. Within any of these directions, two homes a quarter mile apart can still differ by 10 or more dBA depending on how close they sit to a major highway.
How far back from SR-56 do you need to be?
SR-56 produces an estimated 67 dBA at its loudest centerline points. Noise drops logarithmically with distance, with the exact rate depending on what's between you and the road. Tree cover, walls, terrain, and pavement type all matter. At roughly a quarter mile back, traffic fades into the noise level of a soft rainfall.
At source
67 dBA
Highway traffic 50 ft away
165 ft
54 dBA
Quiet office to normal conversation
330 ft
47 dBA
Quiet office
660 ft
40 dBA
Soft rainfall
¼ mile
35 dBA
Soft rainfall
½ mile
35 dBA
Soft rainfall
Calculated from the model's calibrated attenuation formula. About 36% of Meadow Point sits under tree canopy (much heavier than most neighborhoods) and roughly 27% is impervious surface like pavement and rooftops. Both are folded into the per-place decay rate above. Heavier canopy pulls noise down faster with distance; impervious surfaces slow the drop.
-->
Airport Noise
Tampa International (TPA) sits southwest of Meadow Point. The U.S. Department of Transportation measures aviation noise around this airport directly, and the model uses those federal measurements rather than synthetic predictions.
Blocks under the approach and departure paths carry combined road-plus-aviation noise, with some exceeding 75 dBA on the map's Overall layer. Blocks on the opposite side of Meadow Point, particularly to the northeast, show no measurable aviation contribution. Use the Aviation toggle on the map above to isolate the airport's footprint.
How Noise Is Distributed Across Meadow Point
The bar chart below shows the share of Meadow Point residents in each noise band. About 94% of residents live below the EPA's 55 dBA threshold, and roughly 0% live in blocks above 60 dBA. Long-term exposure in that range is linked to elevated stress hormones and cardiovascular risk.
How Meadow Point Compares
Meadow Point sits the lowest among the peer group. Below: how Meadow Point's average outdoor noise and share of residents above the EPA threshold compare with West Meadows, Sulphur Springs, Lowry Park Central, and Temple Crest.
Average noise level (dBA)
Meadow Point's 46.3 dBA pop-weighted average is the lowest among the peer group. Florida as a whole averages 51.6 dBA and the U.S. averages 52.0 dBA. Both are lower than Meadow Point because most of either area is rural land away from major roads.
Share of residents above 55 dBA
About 10.9% of Meadow Point residents live in blocks where outdoor levels exceed the EPA's 55 dBA threshold. That's fewer than any of its peer group. Measured by land area instead, 26.2% of Meadow Point's footprint sits above 55 dBA, against a Florida average of 31.8% and a national average of 28.1%.
What This Means if You're Moving to Meadow Point
Distance from highways matters more than the neighborhood name. Two homes in the same zip code can differ by 20 dBA if one sits 100 meters from SR-56 and the other 500 meters away. The model captures this at 100-meter resolution, so noise exposure changes block by block.
Tree canopy can help reduce modeled noise exposure. Roughly 36% of Meadow Point is under tree cover (much heavier than most neighborhoods), and the dominant land cover is medium-intensity developed land. Both are measured from federal USDA Forest Service and USGS satellite imagery at 30-meter resolution. Streets with 60% or higher canopy show 3 to 5 dBA lower noise than comparable streets with bare ground or pavement, which is why the per-place decay rate above already accounts for it.
Airport noise is directional. Tampa International's approach paths concentrate aviation noise to the southwest. Neighborhoods to the northeast of downtown show no measurable contribution from the airport.
Sources & Methodology
The BestNeighborhood noise model is calibrated against nearly one million federal ground-truth measurements across four states. Road noise is computed from segment-level federal traffic data and propagated outward using physics-based acoustic decay, with attenuation rates that depend on the surrounding land cover.
All inputs are published federal datasets. Block-level noise is computed by combining road, rail, and aviation sound sources in the energy domain, the same physics used in professional environmental noise assessments. Read the full methodology.
