Noise Levels in New England, ND | Find Quiet Neighborhoods With Our Sound Map

46 dBA
Average noise across New England
Quiet suburban street at night
123
Residents above the EPA 55 dBA threshold
15% of New England residents
61 dBA
Loudest residential point
Busy restaurant

This map shows modeled outdoor noise across New England at 100-meter resolution, combining road, aviation, and rail sources. Green areas measure below 45 dBA. Orange and red exceed the EPA's 55 dBA outdoor threshold linked to long-term health effects. Use the layer toggles to view each source on its own or all together.

Overall
Road
Rail
Aviation
New England, ND Map of Noise Levels in New England
Click the map to explore
35 45 55 70 90
Quietest (dBA) Loudest
Colorblind friendly off

What the numbers sound like

  • 30 dBAWhisper
  • 40 dBASoft rainfall
  • 45 dBAQuiet suburban street at night
  • 50 dBAQuiet office
  • 55 dBAEPA outdoor threshold: light traffic 100 ft away
  • 60 dBANormal conversation an arm's length away
  • 65 dBABusy restaurant
  • 70 dBAHighway traffic 50 ft away
  • 80 dBACity bus interior

Population Above the EPA Outdoor Threshold

The EPA's 55 dBA outdoor reference level is a common benchmark for residential noise exposure, especially for activity interference, annoyance, and long-term community noise concerns. About 123 New England residents, or 14.7%, live above that level. By land area, 7.2% of New England is above 55 dBA.

See how noise in New England compares to similar-sized cities.

Noise by Part of New England

Average noise levels for New England residents, grouped by direction from the center of New England. Western New England carries the highest population-weighted average; Eastern New England carries the lowest. Just 0% of residents in Eastern New England live in blocks above the EPA's 55 dBA threshold, a fifth of the share in Western New England.

Eastern New England

34.6 dBA · Quiet
Soft rainfall

0% of people above 55 dBA

QuietLoud

Northern New England

41.0 dBA · Quiet
Soft rainfall

3% of people above 55 dBA

QuietLoud

Southern New England

39.1 dBA · Quiet
Soft rainfall

0% of people above 55 dBA

QuietLoud

Western New England

51.8 dBA · Moderate
Quiet office to normal conversation

26% of people above 55 dBA

QuietLoud

Western New England sounds about 229% louder than Eastern New England to the human ear, a 17.2 dBA gap. Every 10 dBA roughly doubles perceived loudness. Within any of these directions, two homes a quarter mile apart can still differ by 10 or more dBA depending on how close they sit to a major highway.

Loudest Road Corridors

The model evaluates every road in New England using federal traffic counts, posted speeds, heavy-truck ratios, and pavement type. The source level shown is the modeled noise at the road centerline, where it is loudest. Noise drops with distance, faster in vegetated areas and slower over open pavement.

RoadTypeAvg. source dBAPeak source dBA
60THSTSW Local 54.5 55
75THSTSW Major collector 49.5 55
109THAVESW Local 55.0 55
110THAVESW Local 52.8 55
113THAVESW Local 55.0 55

How far back from 60THSTSW do you need to be?

60THSTSW produces an estimated 55 dBA at its loudest centerline points. Noise drops logarithmically with distance, with the exact rate depending on what's between you and the road. Tree cover, walls, terrain, and pavement type all matter. At roughly a quarter mile back, traffic fades into the noise level of a soft rainfall.

At source
55 dBA
Quiet office to normal conversation
165 ft
41 dBA
Soft rainfall
330 ft
35 dBA
Soft rainfall
660 ft
35 dBA
Soft rainfall
¼ mile
35 dBA
Soft rainfall
½ mile
35 dBA
Soft rainfall

Calculated from the model's calibrated attenuation formula. About 0% of New England sits under tree canopy (much lighter than most cities) and roughly 26% is impervious surface like pavement and rooftops. Both are folded into the per-place decay rate above. Heavier canopy pulls noise down faster with distance; impervious surfaces slow the drop.

How Noise Is Distributed Across New England

The bar chart below shows the share of New England residents in each noise band. About 87% of residents live below the EPA's 55 dBA threshold, and roughly 0% live in blocks above 60 dBA. Long-term exposure in that range is linked to elevated stress hormones and cardiovascular risk.

How New England Compares

New England sits the lowest among the peer group. Below: how New England's average outdoor noise and share of residents above the EPA threshold compare with South Heart, Mott, Richardton, and Lehigh.

Average noise level (dBA)

New England's 45.9 dBA pop-weighted average is the lowest among the peer group. North Dakota as a whole averages 50.1 dBA and the U.S. averages 52.0 dBA. Both are lower than New England because most of either area is rural land away from major roads.

Share of residents above 55 dBA

About 14.7% of New England residents live in blocks where outdoor levels exceed the EPA's 55 dBA threshold. That's in the middle of its peer group. Measured by land area instead, 7.2% of New England's footprint sits above 55 dBA, against a North Dakota average of 11.5% and a national average of 28.1%.

What This Means if You're Moving to New England

  • Distance from highways matters more than the neighborhood name. Two homes in the same zip code can differ by 20 dBA if one sits 100 meters from 60THSTSW and the other 500 meters away. The model captures this at 100-meter resolution, so noise exposure changes block by block.
  • Tree canopy can help reduce modeled noise exposure. Roughly 0% of New England is under tree cover (much lighter than most cities), and the dominant land cover is low-intensity developed land. Both are measured from federal USDA Forest Service and USGS satellite imagery at 30-meter resolution. Streets with 60% or higher canopy show 3 to 5 dBA lower noise than comparable streets with bare ground or pavement, which is why the per-place decay rate above already accounts for it.

Sources & Methodology

The BestNeighborhood noise model is calibrated against nearly one million federal ground-truth measurements across four states. Road noise is computed from segment-level federal traffic data and propagated outward using physics-based acoustic decay, with attenuation rates that depend on the surrounding land cover.

Federal datasets used:

FHWA Highway Performance Monitoring System: road geometry, traffic counts, lane configuration
U.S. DoT Bureau of Transportation Statistics National Transportation Noise Map: aviation and rail noise, road calibration ground truth
USGS / MRLC National Land Cover Database: land cover and impervious surface coverage
USDA Forest Service Tree Canopy Cover: vegetation density for sound propagation
U.S. Census Bureau TIGER/Line: block-level geography and population
U.S. EPA Levels Document: 55 dBA outdoor reference level

All inputs are published federal datasets. Block-level noise is computed by combining road, rail, and aviation sound sources in the energy domain, the same physics used in professional environmental noise assessments. Read the full methodology.