Noise Levels in North Epworth, MI | Find Quiet Neighborhoods With Our Sound Map

46 dBA
Average noise across North Epworth
Quiet suburban street at night
38
Residents above the EPA 55 dBA threshold
6% of North Epworth residents
76 dBA
Loudest residential point
City bus interior

This map shows modeled outdoor noise across North Epworth at 100-meter resolution, combining road, aviation, and rail sources. Green areas measure below 45 dBA. Orange and red exceed the EPA's 55 dBA outdoor threshold linked to long-term health effects. Use the layer toggles to view each source on its own or all together.

Overall
Road
Rail
Aviation
North Epworth, MI Map of Noise Levels in North Epworth
Click the map to explore
35 45 55 70 90
Quietest (dBA) Loudest
Colorblind friendly off

What the numbers sound like

  • 30 dBAWhisper
  • 40 dBASoft rainfall
  • 45 dBAQuiet suburban street at night
  • 50 dBAQuiet office
  • 55 dBAEPA outdoor threshold: light traffic 100 ft away
  • 60 dBANormal conversation an arm's length away
  • 65 dBABusy restaurant
  • 70 dBAHighway traffic 50 ft away
  • 80 dBACity bus interior

Population Above the EPA Outdoor Threshold

The EPA's 55 dBA outdoor reference level is a common benchmark for residential noise exposure, especially for activity interference, annoyance, and long-term community noise concerns. About 38 North Epworth residents, or 6.0%, live above that level. By land area, 4.3% of North Epworth is above 55 dBA.

See how noise in North Epworth compares to similar-sized cities.

Noise by Part of North Epworth

Average noise levels for North Epworth residents, grouped by direction from the center of North Epworth. Southern North Epworth carries the highest population-weighted average; Northern North Epworth carries the lowest. Just 0% of residents in Northern North Epworth live in blocks above the EPA's 55 dBA threshold, a fifth of the share in Southern North Epworth.

Northern North Epworth

36.2 dBA · Quiet
Soft rainfall

0% of people above 55 dBA

QuietLoud

Southern North Epworth

54.0 dBA · Moderate-loud
Quiet office to normal conversation

13% of people above 55 dBA

QuietLoud

Western North Epworth

43.2 dBA · Quiet
Quiet suburban street at night

0% of people above 55 dBA

QuietLoud

Southern North Epworth sounds about 243% louder than Northern North Epworth to the human ear, a 17.8 dBA gap. Every 10 dBA roughly doubles perceived loudness. Within any of these directions, two homes a quarter mile apart can still differ by 10 or more dBA depending on how close they sit to a major highway.

Loudest Road Corridors

The model evaluates every road in North Epworth using federal traffic counts, posted speeds, heavy-truck ratios, and pavement type. The source level shown is the modeled noise at the road centerline, where it is loudest. Noise drops with distance, faster in vegetated areas and slower over open pavement.

RoadTypeAvg. source dBAPeak source dBA
US Hwy 31 Freeway 69.0 69
M 116 Major collector 52.0 52
S Lakeshore Dr Local 51.0 51
N Lincoln Rd Local 51.0 51

How far back from US Hwy 31 do you need to be?

US Hwy 31 produces an estimated 69 dBA at its loudest centerline points. Noise drops logarithmically with distance, with the exact rate depending on what's between you and the road. Tree cover, walls, terrain, and pavement type all matter. At roughly a quarter mile back, traffic fades into the noise level of a soft rainfall.

At source
69 dBA
Highway traffic 50 ft away
165 ft
54 dBA
Quiet office to normal conversation
330 ft
45 dBA
Quiet suburban street at night
660 ft
37 dBA
Soft rainfall
¼ mile
35 dBA
Soft rainfall
½ mile
35 dBA
Soft rainfall

Calculated from the model's calibrated attenuation formula. About 66% of North Epworth sits under tree canopy (much heavier than most cities) and roughly 4% is impervious surface like pavement and rooftops. Both are folded into the per-place decay rate above. Heavier canopy pulls noise down faster with distance; impervious surfaces slow the drop.

How Noise Is Distributed Across North Epworth

The bar chart below shows the share of North Epworth residents in each noise band. About 60% of residents live below the EPA's 55 dBA threshold, and roughly 5% live in blocks above 60 dBA. Long-term exposure in that range is linked to elevated stress hormones and cardiovascular risk.

How North Epworth Compares

North Epworth sits the highest among the peer group. Below: how North Epworth's average outdoor noise and share of residents above the EPA threshold compare with Sugar Grove, Wiley, Tallman, and Custer.

Average noise level (dBA)

North Epworth's 45.6 dBA pop-weighted average is the highest among the peer group. Michigan as a whole averages 49.3 dBA and the U.S. averages 52.0 dBA. Both are lower than North Epworth because most of either area is rural land away from major roads.

Share of residents above 55 dBA

About 6.0% of North Epworth residents live in blocks where outdoor levels exceed the EPA's 55 dBA threshold. That's more than any of its peer group. Measured by land area instead, 4.3% of North Epworth's footprint sits above 55 dBA, against a Michigan average of 19.9% and a national average of 28.1%.

What This Means if You're Moving to North Epworth

  • Distance from highways matters more than the neighborhood name. Two homes in the same zip code can differ by 20 dBA if one sits 100 meters from US Hwy 31 and the other 500 meters away. The model captures this at 100-meter resolution, so noise exposure changes block by block.
  • Tree canopy can help reduce modeled noise exposure. Roughly 66% of North Epworth is under tree cover (much heavier than most cities), and the dominant land cover is woody wetlands. Both are measured from federal USDA Forest Service and USGS satellite imagery at 30-meter resolution. Streets with 60% or higher canopy show 3 to 5 dBA lower noise than comparable streets with bare ground or pavement, which is why the per-place decay rate above already accounts for it.

Sources & Methodology

The BestNeighborhood noise model is calibrated against nearly one million federal ground-truth measurements across four states. Road noise is computed from segment-level federal traffic data and propagated outward using physics-based acoustic decay, with attenuation rates that depend on the surrounding land cover.

Federal datasets used:

FHWA Highway Performance Monitoring System: road geometry, traffic counts, lane configuration
U.S. DoT Bureau of Transportation Statistics National Transportation Noise Map: aviation and rail noise, road calibration ground truth
USGS / MRLC National Land Cover Database: land cover and impervious surface coverage
USDA Forest Service Tree Canopy Cover: vegetation density for sound propagation
U.S. Census Bureau TIGER/Line: block-level geography and population
U.S. EPA Levels Document: 55 dBA outdoor reference level

All inputs are published federal datasets. Block-level noise is computed by combining road, rail, and aviation sound sources in the energy domain, the same physics used in professional environmental noise assessments. Read the full methodology.