Noise Levels in North Richmond, CA | Find Quiet Neighborhoods With Our Sound Map

56 dBA
Average noise across North Richmond
Normal conversation an arm’s length away
1,813
Residents above the EPA 55 dBA threshold
66% of North Richmond residents
75 dBA
Loudest residential point
City bus interior

This map shows modeled outdoor noise across North Richmond at 100-meter resolution, combining road, aviation, and rail sources. Green areas measure below 45 dBA. Orange and red exceed the EPA's 55 dBA outdoor threshold linked to long-term health effects. Use the layer toggles to view each source on its own or all together.

Overall
Road
Rail
Aviation
North Richmond, CA Map of Noise Levels in North Richmond
Click the map to explore
35 45 55 70 90
Quietest (dBA) Loudest
Colorblind friendly off

What the numbers sound like

  • 30 dBAWhisper
  • 40 dBASoft rainfall
  • 45 dBAQuiet suburban street at night
  • 50 dBAQuiet office
  • 55 dBAEPA outdoor threshold: light traffic 100 ft away
  • 60 dBANormal conversation an arm's length away
  • 65 dBABusy restaurant
  • 70 dBAHighway traffic 50 ft away
  • 80 dBACity bus interior

Population Above the EPA Outdoor Threshold

The EPA's 55 dBA outdoor reference level is a common benchmark for residential noise exposure, especially for activity interference, annoyance, and long-term community noise concerns. About 1,813 North Richmond residents, or 66.3%, live above that level. By land area, 56.4% of North Richmond is above 55 dBA.

See how noise in North Richmond compares to similar-sized cities.

Noise by Part of North Richmond

Average noise levels for North Richmond residents, grouped by direction from the center of North Richmond. Southern North Richmond carries the highest population-weighted average; Northern North Richmond carries the lowest. Just 6% of residents in Northern North Richmond live in blocks above the EPA's 55 dBA threshold, a fifth of the share in Southern North Richmond.

Central North Richmond

55.5 dBA · Moderate-loud
Quiet office to normal conversation

62% of people above 55 dBA

QuietLoud

Eastern North Richmond

58.6 dBA · Loud
Normal conversation an arm’s length away

93% of people above 55 dBA

QuietLoud

Northern North Richmond

53.4 dBA · Moderate-loud
Quiet office to normal conversation

6% of people above 55 dBA

QuietLoud

Southern North Richmond

60.5 dBA · Loud
Normal conversation an arm’s length away

100% of people above 55 dBA

QuietLoud

Western North Richmond

59.6 dBA · Loud
Normal conversation an arm’s length away

98% of people above 55 dBA

QuietLoud

Southern North Richmond sounds about 64% louder than Northern North Richmond to the human ear, a 7.1 dBA gap. Every 10 dBA roughly doubles perceived loudness. Within any of these directions, two homes a quarter mile apart can still differ by 10 or more dBA depending on how close they sit to a major highway.

How far back from Richmond Pkwy do you need to be?

Richmond Pkwy produces an estimated 67 dBA at its loudest centerline points. Noise drops logarithmically with distance, with the exact rate depending on what's between you and the road. Tree cover, walls, terrain, and pavement type all matter. At roughly a quarter mile back, traffic fades into the noise level of a soft rainfall.

At source
67 dBA
Highway traffic 50 ft away
165 ft
53 dBA
Quiet office to normal conversation
330 ft
45 dBA
Quiet suburban street at night
660 ft
37 dBA
Soft rainfall
¼ mile
35 dBA
Soft rainfall
½ mile
35 dBA
Soft rainfall

Calculated from the model's calibrated attenuation formula. About 2% of North Richmond sits under tree canopy (much lighter than most cities) and roughly 61% is impervious surface like pavement and rooftops. Both are folded into the per-place decay rate above. Heavier canopy pulls noise down faster with distance; impervious surfaces slow the drop.

-->

Rail Noise

Active freight rail runs through parts of North Richmond. For most blocks the rail-only contribution is small. Combined road-plus-rail noise rarely exceeds road noise on its own. The exceptions are the handful of blocks within roughly a quarter mile of the right-of-way during pass-through hours.

Use the Rail toggle on the map above to isolate rail's contribution from road and aviation.

Airport Noise

San Francisco Bay Oakland International (OAK) sits southeast of North Richmond. The U.S. Department of Transportation models aviation noise around this airport from federal traffic data, and the model uses those federal measurements rather than synthetic predictions.

Blocks under the approach and departure paths carry combined road-plus-aviation noise, with some exceeding 65 dBA on the map's Overall layer. Blocks on the opposite side of North Richmond, particularly to the northwest, show no measurable aviation contribution. Use the Aviation toggle on the map above to isolate the airport's footprint.

How Noise Is Distributed Across North Richmond

The bar chart below shows the share of North Richmond residents in each noise band. About 31% of residents live below the EPA's 55 dBA threshold, and roughly 5% live in blocks above 60 dBA. Long-term exposure in that range is linked to elevated stress hormones and cardiovascular risk.

How North Richmond Compares

North Richmond sits the highest among the peer group. Below: how North Richmond's average outdoor noise and share of residents above the EPA threshold compare with Crockett, Belvedere-Tiburon, San Quentin, and Belvedere.

Average noise level (dBA)

North Richmond's 56.2 dBA pop-weighted average is the highest among the peer group. California as a whole averages 54.0 dBA and the U.S. averages 52.0 dBA. Both are lower than North Richmond because most of either area is rural land away from major roads.

Share of residents above 55 dBA

About 66.3% of North Richmond residents live in blocks where outdoor levels exceed the EPA's 55 dBA threshold. That's more than any of its peer group. Measured by land area instead, 56.4% of North Richmond's footprint sits above 55 dBA, against a California average of 36.0% and a national average of 28.1%.

What This Means if You're Moving to North Richmond

  • Distance from highways matters more than the neighborhood name. Two homes in the same zip code can differ by 20 dBA if one sits 100 meters from Richmond Pkwy and the other 500 meters away. The model captures this at 100-meter resolution, so noise exposure changes block by block.
  • Tree canopy can help reduce modeled noise exposure. Roughly 2% of North Richmond is under tree cover (much lighter than most cities), and the dominant land cover is medium-intensity developed land. Both are measured from federal USDA Forest Service and USGS satellite imagery at 30-meter resolution. Streets with 60% or higher canopy show 3 to 5 dBA lower noise than comparable streets with bare ground or pavement, which is why the per-place decay rate above already accounts for it.
  • Airport noise is directional. San Francisco Bay Oakland International's approach paths concentrate aviation noise to the southeast. Neighborhoods to the northwest of downtown show no measurable contribution from the airport.

Sources & Methodology

The BestNeighborhood noise model is calibrated against nearly one million federal ground-truth measurements across four states. Road noise is computed from segment-level federal traffic data and propagated outward using physics-based acoustic decay, with attenuation rates that depend on the surrounding land cover.

Federal datasets used:

FHWA Highway Performance Monitoring System: road geometry, traffic counts, lane configuration
U.S. DoT Bureau of Transportation Statistics National Transportation Noise Map: aviation and rail noise, road calibration ground truth
USGS / MRLC National Land Cover Database: land cover and impervious surface coverage
USDA Forest Service Tree Canopy Cover: vegetation density for sound propagation
U.S. Census Bureau TIGER/Line: block-level geography and population
U.S. EPA Levels Document: 55 dBA outdoor reference level

All inputs are published federal datasets. Block-level noise is computed by combining road, rail, and aviation sound sources in the energy domain, the same physics used in professional environmental noise assessments. Read the full methodology.