Noise Levels in Palm Beach County, FL | Find Quiet Neighborhoods With Our Sound Map

52 dBA
Average noise across Palm Beach County
Quiet office to normal conversation
356,373
Residents above the EPA 55 dBA threshold
28% of Palm Beach County residents
105 dBA
Loudest residential point
Power saw

This map shows modeled outdoor noise across Palm Beach County at 100-meter resolution, combining road, aviation, and rail sources. Green areas measure below 45 dBA. Orange and red exceed the EPA's 55 dBA outdoor threshold linked to long-term health effects. Use the layer toggles to view each source on its own or all together.

Overall
Road
Rail
Aviation
Palm Beach County, FL Map of Noise Levels in Palm Beach County
Click the map to explore
35 45 55 70 90
Quietest (dBA) Loudest
Colorblind friendly off

What the numbers sound like

  • 30 dBAWhisper
  • 40 dBASoft rainfall
  • 45 dBAQuiet suburban street at night
  • 50 dBAQuiet office
  • 55 dBAEPA outdoor threshold: light traffic 100 ft away
  • 60 dBANormal conversation an arm's length away
  • 65 dBABusy restaurant
  • 70 dBAHighway traffic 50 ft away
  • 80 dBACity bus interior

Population Above the EPA Outdoor Threshold

The EPA's 55 dBA outdoor reference level is a common benchmark for residential noise exposure, especially for activity interference, annoyance, and long-term community noise concerns. About 356,373 Palm Beach County residents, or 27.8%, live above that level. By land area, 36.1% of Palm Beach County is above 55 dBA.

See how noise in Palm Beach County compares to similar-sized counties.

Noise by Part of Palm Beach County

Average noise levels for Palm Beach County residents, grouped by direction from the center of Palm Beach County. Eastern Palm Beach County carries the highest population-weighted average; Central Palm Beach County carries the lowest. Just 4% of residents in Central Palm Beach County live in blocks above the EPA's 55 dBA threshold, a fifth of the share in Eastern Palm Beach County.

Central Palm Beach County

47.8 dBA · Mostly quiet
Quiet office

4% of people above 55 dBA

QuietLoud

Eastern Palm Beach County

55.2 dBA · Moderate-loud
Quiet office to normal conversation

47% of people above 55 dBA

QuietLoud

Northern Palm Beach County

52.2 dBA · Moderate
Quiet office to normal conversation

28% of people above 55 dBA

QuietLoud

Southern Palm Beach County

51.2 dBA · Moderate
Quiet office to normal conversation

24% of people above 55 dBA

QuietLoud

Western Palm Beach County

49.2 dBA · Mostly quiet
Quiet office

17% of people above 55 dBA

QuietLoud

Eastern Palm Beach County sounds about 67% louder than Central Palm Beach County to the human ear, a 7.4 dBA gap. Every 10 dBA roughly doubles perceived loudness. Within any of these directions, two homes a quarter mile apart can still differ by 10 or more dBA depending on how close they sit to a major highway.

Loudest Road Corridors

The model evaluates every road in Palm Beach County using federal traffic counts, posted speeds, heavy-truck ratios, and pavement type. The source level shown is the modeled noise at the road centerline, where it is loudest. Noise drops with distance, faster in vegetated areas and slower over open pavement.

RoadTypeAvg. source dBAPeak source dBA
I-95 Interstate 73.3 81
Tpk Mainline Sr-91 Freeway 75.6 77
State Hwy 9 Interstate 67.6 75
State Hwy 91 Freeway 63.6 71
Southern Blvd Principal arterial 68.5 71

How far back from I-95 do you need to be?

I-95 produces an estimated 81 dBA at its loudest centerline points. Noise drops logarithmically with distance, with the exact rate depending on what's between you and the road. Tree cover, walls, terrain, and pavement type all matter. At roughly a quarter mile back, traffic fades into the noise level of a quiet office.

At source
81 dBA
City bus interior
165 ft
69 dBA
Highway traffic 50 ft away
330 ft
61 dBA
Busy restaurant
660 ft
54 dBA
Quiet office to normal conversation
¼ mile
47 dBA
Quiet office
½ mile
40 dBA
Soft rainfall

Calculated from the model's calibrated attenuation formula. About 10% of Palm Beach County sits under tree canopy (lighter than most counties) and roughly 44% is impervious surface like pavement and rooftops. Both are folded into the per-place decay rate above. Heavier canopy pulls noise down faster with distance; impervious surfaces slow the drop.

Rail Noise

Active freight rail runs through parts of Palm Beach County. For most blocks the rail-only contribution is small. Combined road-plus-rail noise rarely exceeds road noise on its own. The exceptions are the handful of blocks within roughly a quarter mile of the right-of-way during pass-through hours.

Use the Rail toggle on the map above to isolate rail's contribution from road and aviation.

Airport Noise

Palm Beach International (PBI) sits northeast of Palm Beach County. The U.S. Department of Transportation models aviation noise around this airport from federal traffic data, and the model uses those federal measurements rather than synthetic predictions.

Blocks under the approach and departure paths carry combined road-plus-aviation noise, with some exceeding 90 dBA on the map's Overall layer. Blocks on the opposite side of Palm Beach County, particularly to the southwest, show no measurable aviation contribution. Use the Aviation toggle on the map above to isolate the airport's footprint.

How Noise Is Distributed Across Palm Beach County

The bar chart below shows the share of Palm Beach County residents in each noise band. About 67% of residents live below the EPA's 55 dBA threshold, and roughly 10% live in blocks above 60 dBA. Long-term exposure in that range is linked to elevated stress hormones and cardiovascular risk.

How Palm Beach County Compares

Palm Beach County sits at the quieter end of the spectrum. Below: how Palm Beach County's average outdoor noise and share of residents above the EPA threshold compare with Broward County, Miami-Dade County, St. Lucie County, and Martin County.

Average noise level (dBA)

Palm Beach County's 51.9 dBA pop-weighted average is at the quieter end of the spectrum. Florida as a whole averages 51.6 dBA and the U.S. averages 52.0 dBA. Both are lower than Palm Beach County because most of either area is rural land away from major roads.

Share of residents above 55 dBA

About 27.8% of Palm Beach County residents live in blocks where outdoor levels exceed the EPA's 55 dBA threshold. That's in the middle of its peer group. Measured by land area instead, 36.1% of Palm Beach County's footprint sits above 55 dBA, against a Florida average of 31.8% and a national average of 28.1%.

What This Means if You're Moving to Palm Beach County

  • Distance from highways matters more than the neighborhood name. Two homes in the same zip code can differ by 20 dBA if one sits 100 meters from I-95 and the other 500 meters away. The model captures this at 100-meter resolution, so noise exposure changes block by block.
  • Tree canopy can help reduce modeled noise exposure. Roughly 10% of Palm Beach County is under tree cover (lighter than most counties), and the dominant land cover is low-intensity developed land. Both are measured from federal USDA Forest Service and USGS satellite imagery at 30-meter resolution. Streets with 60% or higher canopy show 3 to 5 dBA lower noise than comparable streets with bare ground or pavement, which is why the per-place decay rate above already accounts for it.
  • Airport noise is directional. Palm Beach International's approach paths concentrate aviation noise to the northeast. Neighborhoods to the southwest of downtown show no measurable contribution from the airport.

Sources & Methodology

The BestNeighborhood noise model is calibrated against nearly one million federal ground-truth measurements across four states. Road noise is computed from segment-level federal traffic data and propagated outward using physics-based acoustic decay, with attenuation rates that depend on the surrounding land cover.

Federal datasets used:

FHWA Highway Performance Monitoring System: road geometry, traffic counts, lane configuration
U.S. DoT Bureau of Transportation Statistics National Transportation Noise Map: aviation and rail noise, road calibration ground truth
USGS / MRLC National Land Cover Database: land cover and impervious surface coverage
USDA Forest Service Tree Canopy Cover: vegetation density for sound propagation
U.S. Census Bureau TIGER/Line: block-level geography and population
U.S. EPA Levels Document: 55 dBA outdoor reference level

All inputs are published federal datasets. Block-level noise is computed by combining road, rail, and aviation sound sources in the energy domain, the same physics used in professional environmental noise assessments. Read the full methodology.