Noise Levels in Park City, IL | Find Quiet Neighborhoods With Our Sound Map
55 dBA
Average noise across Park City
Quiet office to normal conversation
3,109
Residents above the EPA 55 dBA threshold
52% of Park City residents
83 dBA
Loudest residential point
Food blender at arm’s length
This map shows modeled outdoor noise across Park City at 100-meter resolution, combining road, aviation, and rail sources. Green areas measure below 45 dBA. Orange and red exceed the EPA's 55 dBA outdoor threshold linked to long-term health effects. Use the layer toggles to view each source on its own or all together.
Overall
Road
Rail
Aviation
Click the map to explore
35 dBa55 dBa (EPA limit)90+ dBa
3545557090
Quietest (dBA)Loudest
Colorblind friendlyoff
What the numbers sound like
30 dBAWhisper
40 dBASoft rainfall
45 dBAQuiet suburban street at night
50 dBAQuiet office
55 dBAEPA outdoor threshold: light traffic 100 ft away
60 dBANormal conversation an arm's length away
65 dBABusy restaurant
70 dBAHighway traffic 50 ft away
80 dBACity bus interior
Population Above the EPA Outdoor Threshold
The EPA's 55 dBA outdoor reference level is a common benchmark for residential noise exposure, especially for activity interference, annoyance, and long-term community noise concerns. About 3,109 Park City residents, or 51.6%, live above that level. By land area, 56.7% of Park City is above 55 dBA.
Average noise levels for Park City residents, grouped by direction from the center of Park City. Central Park City carries the highest population-weighted average; Northern Park City carries the lowest. Just 4% of residents in Northern Park City live in blocks above the EPA's 55 dBA threshold, a fifth of the share in Central Park City.
Central Park City
56.8 dBA · Moderate-loud
Normal conversation an arm’s length away
69% of people above 55 dBA
QuietLoud
Eastern Park City
53.6 dBA · Moderate-loud
Quiet office to normal conversation
46% of people above 55 dBA
QuietLoud
Northern Park City
45.8 dBA · Mostly quiet
Quiet suburban street at night
4% of people above 55 dBA
QuietLoud
Southern Park City
46.4 dBA · Mostly quiet
Quiet office
0% of people above 55 dBA
QuietLoud
Western Park City
55.5 dBA · Moderate-loud
Quiet office to normal conversation
45% of people above 55 dBA
QuietLoud
Central Park City sounds about 114% louder than Northern Park City to the human ear, a 11.0 dBA gap. Every 10 dBA roughly doubles perceived loudness. Within any of these directions, two homes a quarter mile apart can still differ by 10 or more dBA depending on how close they sit to a major highway.
How far back from Skokie Hwy do you need to be?
Skokie Hwy produces an estimated 67 dBA at its loudest centerline points. Noise drops logarithmically with distance, with the exact rate depending on what's between you and the road. Tree cover, walls, terrain, and pavement type all matter. At roughly a quarter mile back, traffic fades into the noise level of a soft rainfall.
At source
67 dBA
Highway traffic 50 ft away
165 ft
53 dBA
Quiet office to normal conversation
330 ft
46 dBA
Quiet suburban street at night
660 ft
38 dBA
Soft rainfall
¼ mile
35 dBA
Soft rainfall
½ mile
35 dBA
Soft rainfall
Calculated from the model's calibrated attenuation formula. About 12% of Park City sits under tree canopy (lighter than most cities) and roughly 58% is impervious surface like pavement and rooftops. Both are folded into the per-place decay rate above. Heavier canopy pulls noise down faster with distance; impervious surfaces slow the drop.
-->
Rail Noise
Active freight rail runs through parts of Park City. For most blocks the rail-only contribution is small. Combined road-plus-rail noise rarely exceeds road noise on its own. The exceptions are the handful of blocks within roughly a quarter mile of the right-of-way during pass-through hours.
Use the Rail toggle on the map above to isolate rail's contribution from road and aviation.
Airport Noise
Chicago O'Hare International (ORD) sits south of Park City. The U.S. Department of Transportation measures aviation noise around this airport directly, and the model uses those federal measurements rather than synthetic predictions.
Blocks under the approach and departure paths carry combined road-plus-aviation noise, with some exceeding 75 dBA on the map's Overall layer. Blocks on the opposite side of Park City, particularly to the north, show no measurable aviation contribution. Use the Aviation toggle on the map above to isolate the airport's footprint.
How Noise Is Distributed Across Park City
The bar chart below shows the share of Park City residents in each noise band. About 50% of residents live below the EPA's 55 dBA threshold, and roughly 8% live in blocks above 60 dBA. Long-term exposure in that range is linked to elevated stress hormones and cardiovascular risk.
How Park City Compares
Park City sits the highest among the peer group. Below: how Park City's average outdoor noise and share of residents above the EPA threshold compare with Green Oaks, Wadsworth, Winthrop Harbor, and Round Lake Park.
Average noise level (dBA)
Park City's 54.8 dBA pop-weighted average is the highest among the peer group. Illinois as a whole averages 52.6 dBA and the U.S. averages 52.0 dBA. Both are lower than Park City because most of either area is rural land away from major roads.
Share of residents above 55 dBA
About 51.6% of Park City residents live in blocks where outdoor levels exceed the EPA's 55 dBA threshold. That's more than any of its peer group. Measured by land area instead, 56.7% of Park City's footprint sits above 55 dBA, against a Illinois average of 29.2% and a national average of 28.1%.
What This Means if You're Moving to Park City
Distance from highways matters more than the neighborhood name. Two homes in the same zip code can differ by 20 dBA if one sits 100 meters from Skokie Hwy and the other 500 meters away. The model captures this at 100-meter resolution, so noise exposure changes block by block.
Tree canopy can help reduce modeled noise exposure. Roughly 12% of Park City is under tree cover (lighter than most cities), and the dominant land cover is medium-intensity developed land. Both are measured from federal USDA Forest Service and USGS satellite imagery at 30-meter resolution. Streets with 60% or higher canopy show 3 to 5 dBA lower noise than comparable streets with bare ground or pavement, which is why the per-place decay rate above already accounts for it.
Airport noise is directional. Chicago O'Hare International's approach paths concentrate aviation noise to the south. Neighborhoods to the north of downtown show no measurable contribution from the airport.
Sources & Methodology
The BestNeighborhood noise model is calibrated against nearly one million federal ground-truth measurements across four states. Road noise is computed from segment-level federal traffic data and propagated outward using physics-based acoustic decay, with attenuation rates that depend on the surrounding land cover.
All inputs are published federal datasets. Block-level noise is computed by combining road, rail, and aviation sound sources in the energy domain, the same physics used in professional environmental noise assessments. Read the full methodology.
