Noise Levels in Park Village, York, PA | Find Quiet Neighborhoods With Our Sound Map
58 dBA
Average noise across Park Village
Normal conversation an arm’s length away
2,983
Residents above the EPA 55 dBA threshold
77% of Park Village residents
72 dBA
Loudest residential point
City bus interior
This map shows modeled outdoor noise across Park Village at 100-meter resolution, combining road, aviation, and rail sources. Green areas measure below 45 dBA. Orange and red exceed the EPA's 55 dBA outdoor threshold linked to long-term health effects. Use the layer toggles to view each source on its own or all together.
Overall
Road
Rail
Aviation
Click the map to explore
35 dBa55 dBa (EPA limit)90+ dBa
3545557090
Quietest (dBA)Loudest
Colorblind friendlyoff
What the numbers sound like
30 dBAWhisper
40 dBASoft rainfall
45 dBAQuiet suburban street at night
50 dBAQuiet office
55 dBAEPA outdoor threshold: light traffic 100 ft away
60 dBANormal conversation an arm's length away
65 dBABusy restaurant
70 dBAHighway traffic 50 ft away
80 dBACity bus interior
Population Above the EPA Outdoor Threshold
The EPA's 55 dBA outdoor reference level is a common benchmark for residential noise exposure, especially for activity interference, annoyance, and long-term community noise concerns. About 2,983 Park Village residents, or 77.1%, live above that level. By land area, 74.4% of Park Village is above 55 dBA.
Average noise levels for Park Village residents, grouped by direction from the center of Park Village. Southern Park Village carries the highest population-weighted average; Northern Park Village carries the lowest. Just 74% of residents in Northern Park Village live in blocks above the EPA's 55 dBA threshold, three-quarters of the share in Southern Park Village.
Central Park Village
59.1 dBA · Loud
Normal conversation an arm’s length away
81% of people above 55 dBA
QuietLoud
Eastern Park Village
59.2 dBA · Loud
Normal conversation an arm’s length away
57% of people above 55 dBA
QuietLoud
Northern Park Village
56.0 dBA · Moderate-loud
Quiet office to normal conversation
74% of people above 55 dBA
QuietLoud
Southern Park Village
60.2 dBA · Loud
Normal conversation an arm’s length away
93% of people above 55 dBA
QuietLoud
Western Park Village
57.7 dBA · Moderate-loud
Normal conversation an arm’s length away
71% of people above 55 dBA
QuietLoud
Southern Park Village sounds about 34% louder than Northern Park Village to the human ear, a 4.2 dBA gap. Every 10 dBA roughly doubles perceived loudness. Within any of these directions, two homes a quarter mile apart can still differ by 10 or more dBA depending on how close they sit to a major highway.
How far back from Market St do you need to be?
Market St produces an estimated 63 dBA at its loudest centerline points. Noise drops logarithmically with distance, with the exact rate depending on what's between you and the road. Tree cover, walls, terrain, and pavement type all matter. At roughly a quarter mile back, traffic fades into the noise level of a soft rainfall.
At source
63 dBA
Busy restaurant
165 ft
49 dBA
Quiet office
330 ft
41 dBA
Soft rainfall
660 ft
35 dBA
Soft rainfall
¼ mile
35 dBA
Soft rainfall
½ mile
35 dBA
Soft rainfall
Calculated from the model's calibrated attenuation formula. About 10% of Park Village sits under tree canopy (lighter than most neighborhoods) and roughly 70% is impervious surface like pavement and rooftops. Both are folded into the per-place decay rate above. Heavier canopy pulls noise down faster with distance; impervious surfaces slow the drop.
-->
Rail Noise
Active freight rail runs through parts of Park Village. For most blocks the rail-only contribution is small. Combined road-plus-rail noise rarely exceeds road noise on its own. The exceptions are the handful of blocks within roughly a quarter mile of the right-of-way during pass-through hours.
Use the Rail toggle on the map above to isolate rail's contribution from road and aviation.
How Noise Is Distributed Across Park Village
The bar chart below shows the share of Park Village residents in each noise band. About 16% of residents live below the EPA's 55 dBA threshold, and roughly 36% live in blocks above 60 dBA. Long-term exposure in that range is linked to elevated stress hormones and cardiovascular risk.
How Park Village Compares
Park Village sits at the louder end of the spectrum. Below: how Park Village's average outdoor noise and share of residents above the EPA threshold compare with The Avenues, Northwest Triangle, Valley View, and Grantley.
Average noise level (dBA)
Park Village's 58.3 dBA pop-weighted average is at the louder end of the spectrum. Pennsylvania as a whole averages 52.9 dBA and the U.S. averages 52.0 dBA. Both are lower than Park Village because most of either area is rural land away from major roads.
Share of residents above 55 dBA
About 77.1% of Park Village residents live in blocks where outdoor levels exceed the EPA's 55 dBA threshold. That's in the middle of its peer group. Measured by land area instead, 74.4% of Park Village's footprint sits above 55 dBA, against a Pennsylvania average of 33.5% and a national average of 28.1%.
What This Means if You're Moving to Park Village
Distance from highways matters more than the neighborhood name. Two homes in the same zip code can differ by 20 dBA if one sits 100 meters from Market St and the other 500 meters away. The model captures this at 100-meter resolution, so noise exposure changes block by block.
Tree canopy can help reduce modeled noise exposure. Roughly 10% of Park Village is under tree cover (lighter than most neighborhoods), and the dominant land cover is medium-intensity developed land. Both are measured from federal USDA Forest Service and USGS satellite imagery at 30-meter resolution. Streets with 60% or higher canopy show 3 to 5 dBA lower noise than comparable streets with bare ground or pavement, which is why the per-place decay rate above already accounts for it.
Sources & Methodology
The BestNeighborhood noise model is calibrated against nearly one million federal ground-truth measurements across four states. Road noise is computed from segment-level federal traffic data and propagated outward using physics-based acoustic decay, with attenuation rates that depend on the surrounding land cover.
All inputs are published federal datasets. Block-level noise is computed by combining road, rail, and aviation sound sources in the energy domain, the same physics used in professional environmental noise assessments. Read the full methodology.
