Noise Levels in Raven Branch, TN | Find Quiet Neighborhoods With Our Sound Map

56 dBA
Average noise across Raven Branch
Quiet office to normal conversation
5
Residents above the EPA 55 dBA threshold
4% of Raven Branch residents
78 dBA
Loudest residential point
City bus interior

This map shows modeled outdoor noise across Raven Branch at 100-meter resolution, combining road, aviation, and rail sources. Green areas measure below 45 dBA. Orange and red exceed the EPA's 55 dBA outdoor threshold linked to long-term health effects. Use the layer toggles to view each source on its own or all together.

Overall
Road
Rail
Aviation
Raven Branch, TN Map of Noise Levels in Raven Branch
Click the map to explore
35 45 55 70 90
Quietest (dBA) Loudest
Colorblind friendly off

What the numbers sound like

  • 30 dBAWhisper
  • 40 dBASoft rainfall
  • 45 dBAQuiet suburban street at night
  • 50 dBAQuiet office
  • 55 dBAEPA outdoor threshold: light traffic 100 ft away
  • 60 dBANormal conversation an arm's length away
  • 65 dBABusy restaurant
  • 70 dBAHighway traffic 50 ft away
  • 80 dBACity bus interior

Population Above the EPA Outdoor Threshold

The EPA's 55 dBA outdoor reference level is a common benchmark for residential noise exposure, especially for activity interference, annoyance, and long-term community noise concerns. About 5 Raven Branch residents, or 4.1%, live above that level. By land area, 21.0% of Raven Branch is above 55 dBA.

See how noise in Raven Branch compares to similar-sized cities.

Noise by Part of Raven Branch

Average noise levels for Raven Branch residents, grouped by direction from the center of Raven Branch. Northern Raven Branch carries the highest population-weighted average; Eastern Raven Branch carries the lowest. Just 2% of residents in Eastern Raven Branch live in blocks above the EPA's 55 dBA threshold, about two-thirds of the share in Northern Raven Branch.

Eastern Raven Branch

41.7 dBA · Quiet
Quiet suburban street at night

2% of people above 55 dBA

QuietLoud

Northern Raven Branch

56.8 dBA · Moderate-loud
Normal conversation an arm’s length away

4% of people above 55 dBA

QuietLoud

Southern Raven Branch

55.6 dBA · Moderate-loud
Quiet office to normal conversation

7% of people above 55 dBA

QuietLoud

Northern Raven Branch sounds about 185% louder than Eastern Raven Branch to the human ear, a 15.1 dBA gap. Every 10 dBA roughly doubles perceived loudness. Within any of these directions, two homes a quarter mile apart can still differ by 10 or more dBA depending on how close they sit to a major highway.

How far back from I-40 do you need to be?

I-40 produces an estimated 75 dBA at its loudest centerline points. Noise drops logarithmically with distance, with the exact rate depending on what's between you and the road. Tree cover, walls, terrain, and pavement type all matter. At roughly a quarter mile back, traffic fades into the noise level of a soft rainfall.

At source
75 dBA
City bus interior
165 ft
61 dBA
Normal conversation an arm’s length away
330 ft
52 dBA
Quiet office to normal conversation
660 ft
44 dBA
Quiet suburban street at night
¼ mile
36 dBA
Soft rainfall
½ mile
35 dBA
Soft rainfall

Calculated from the model's calibrated attenuation formula. About 92% of Raven Branch sits under tree canopy (much heavier than most cities) and roughly 0% is impervious surface like pavement and rooftops. Both are folded into the per-place decay rate above. Heavier canopy pulls noise down faster with distance; impervious surfaces slow the drop.

-->

How Noise Is Distributed Across Raven Branch

The bar chart below shows the share of Raven Branch residents in each noise band. About 11% of residents live below the EPA's 55 dBA threshold, and roughly 11% live in blocks above 60 dBA. Long-term exposure in that range is linked to elevated stress hormones and cardiovascular risk.

How Raven Branch Compares

Raven Branch sits the highest among the peer group. Below: how Raven Branch's average outdoor noise and share of residents above the EPA threshold compare with Nough, Fowler Grove, Rankin, and Wolf Creek.

Average noise level (dBA)

Raven Branch's 55.5 dBA pop-weighted average is the highest among the peer group. Tennessee as a whole averages 49.2 dBA and the U.S. averages 52.0 dBA. Both are lower than Raven Branch because most of either area is rural land away from major roads.

Share of residents above 55 dBA

About 4.1% of Raven Branch residents live in blocks where outdoor levels exceed the EPA's 55 dBA threshold. That's more than any of its peer group. Measured by land area instead, 21.0% of Raven Branch's footprint sits above 55 dBA, against a Tennessee average of 18.7% and a national average of 28.1%.

What This Means if You're Moving to Raven Branch

  • Distance from highways matters more than the neighborhood name. Two homes in the same zip code can differ by 20 dBA if one sits 100 meters from I-40 and the other 500 meters away. The model captures this at 100-meter resolution, so noise exposure changes block by block.
  • Tree canopy can help reduce modeled noise exposure. Roughly 92% of Raven Branch is under tree cover (much heavier than most cities), and the dominant land cover is evergreen forest. Both are measured from federal USDA Forest Service and USGS satellite imagery at 30-meter resolution. Streets with 60% or higher canopy show 3 to 5 dBA lower noise than comparable streets with bare ground or pavement, which is why the per-place decay rate above already accounts for it.

Sources & Methodology

The BestNeighborhood noise model is calibrated against nearly one million federal ground-truth measurements across four states. Road noise is computed from segment-level federal traffic data and propagated outward using physics-based acoustic decay, with attenuation rates that depend on the surrounding land cover.

Federal datasets used:

FHWA Highway Performance Monitoring System: road geometry, traffic counts, lane configuration
U.S. DoT Bureau of Transportation Statistics National Transportation Noise Map: aviation and rail noise, road calibration ground truth
USGS / MRLC National Land Cover Database: land cover and impervious surface coverage
USDA Forest Service Tree Canopy Cover: vegetation density for sound propagation
U.S. Census Bureau TIGER/Line: block-level geography and population
U.S. EPA Levels Document: 55 dBA outdoor reference level

All inputs are published federal datasets. Block-level noise is computed by combining road, rail, and aviation sound sources in the energy domain, the same physics used in professional environmental noise assessments. Read the full methodology.