Noise Levels in Ruff Creek, PA | Find Quiet Neighborhoods With Our Sound Map

45 dBA
Average noise across Ruff Creek
Quiet suburban street at night
27
Residents above the EPA 55 dBA threshold
8% of Ruff Creek residents
81 dBA
Loudest residential point
Food blender at arm’s length

This map shows modeled outdoor noise across Ruff Creek at 100-meter resolution, combining road, aviation, and rail sources. Green areas measure below 45 dBA. Orange and red exceed the EPA's 55 dBA outdoor threshold linked to long-term health effects. Use the layer toggles to view each source on its own or all together.

Overall
Road
Rail
Aviation
Ruff Creek, PA Map of Noise Levels in Ruff Creek
Click the map to explore
35 45 55 70 90
Quietest (dBA) Loudest
Colorblind friendly off

What the numbers sound like

  • 30 dBAWhisper
  • 40 dBASoft rainfall
  • 45 dBAQuiet suburban street at night
  • 50 dBAQuiet office
  • 55 dBAEPA outdoor threshold: light traffic 100 ft away
  • 60 dBANormal conversation an arm's length away
  • 65 dBABusy restaurant
  • 70 dBAHighway traffic 50 ft away
  • 80 dBACity bus interior

Population Above the EPA Outdoor Threshold

The EPA's 55 dBA outdoor reference level is a common benchmark for residential noise exposure, especially for activity interference, annoyance, and long-term community noise concerns. About 27 Ruff Creek residents, or 8.0%, live above that level. By land area, 14.2% of Ruff Creek is above 55 dBA.

See how noise in Ruff Creek compares to similar-sized cities.

Noise by Part of Ruff Creek

Average noise levels for Ruff Creek residents, grouped by direction from the center of Ruff Creek. Central Ruff Creek carries the highest population-weighted average; Western Ruff Creek carries the lowest. Just 2% of residents in Western Ruff Creek live in blocks above the EPA's 55 dBA threshold, a fifth of the share in Central Ruff Creek.

Central Ruff Creek

63.5 dBA · Loud
Busy restaurant

27% of people above 55 dBA

QuietLoud

Eastern Ruff Creek

44.0 dBA · Quiet
Quiet suburban street at night

5% of people above 55 dBA

QuietLoud

Northern Ruff Creek

51.6 dBA · Moderate
Quiet office to normal conversation

21% of people above 55 dBA

QuietLoud

Southern Ruff Creek

47.8 dBA · Mostly quiet
Quiet office

6% of people above 55 dBA

QuietLoud

Western Ruff Creek

36.9 dBA · Quiet
Soft rainfall

2% of people above 55 dBA

QuietLoud

Central Ruff Creek sounds about 532% louder than Western Ruff Creek to the human ear, a 26.6 dBA gap. Every 10 dBA roughly doubles perceived loudness. Within any of these directions, two homes a quarter mile apart can still differ by 10 or more dBA depending on how close they sit to a major highway.

Loudest Road Corridors

The model evaluates every road in Ruff Creek using federal traffic counts, posted speeds, heavy-truck ratios, and pavement type. The source level shown is the modeled noise at the road centerline, where it is loudest. Noise drops with distance, faster in vegetated areas and slower over open pavement.

RoadTypeAvg. source dBAPeak source dBA
SR-0079 SH Interstate 71.2 74
Cm7c Locust Dr Local 57.0 57
Cm71 Craynes Run Rd Local 57.0 57
Cm70 Craig Run Rd Local 57.0 57
Cm6y Cemetery Rd Local 57.0 57

How far back from SR-0079 SH do you need to be?

SR-0079 SH produces an estimated 74 dBA at its loudest centerline points. Noise drops logarithmically with distance, with the exact rate depending on what's between you and the road. Tree cover, walls, terrain, and pavement type all matter. At roughly a quarter mile back, traffic fades into the noise level of a soft rainfall.

At source
74 dBA
City bus interior
165 ft
59 dBA
Normal conversation an arm’s length away
330 ft
51 dBA
Quiet office
660 ft
42 dBA
Quiet suburban street at night
¼ mile
35 dBA
Soft rainfall
½ mile
35 dBA
Soft rainfall

Calculated from the model's calibrated attenuation formula. About 70% of Ruff Creek sits under tree canopy (much heavier than most cities) and roughly 0% is impervious surface like pavement and rooftops. Both are folded into the per-place decay rate above. Heavier canopy pulls noise down faster with distance; impervious surfaces slow the drop.

How Noise Is Distributed Across Ruff Creek

The bar chart below shows the share of Ruff Creek residents in each noise band. About 85% of residents live below the EPA's 55 dBA threshold, and roughly 15% live in blocks above 60 dBA. Long-term exposure in that range is linked to elevated stress hormones and cardiovascular risk.

How Ruff Creek Compares

Ruff Creek sits at the quieter end of the spectrum. Below: how Ruff Creek's average outdoor noise and share of residents above the EPA threshold compare with West Waynesburg, Banetown, Fordyce, and Beallsville.

Average noise level (dBA)

Ruff Creek's 45.0 dBA pop-weighted average is at the quieter end of the spectrum. Pennsylvania as a whole averages 52.9 dBA and the U.S. averages 52.0 dBA. Both are lower than Ruff Creek because most of either area is rural land away from major roads.

Share of residents above 55 dBA

About 8.0% of Ruff Creek residents live in blocks where outdoor levels exceed the EPA's 55 dBA threshold. That's in the middle of its peer group. Measured by land area instead, 14.2% of Ruff Creek's footprint sits above 55 dBA, against a Pennsylvania average of 33.5% and a national average of 28.1%.

What This Means if You're Moving to Ruff Creek

  • Distance from highways matters more than the neighborhood name. Two homes in the same zip code can differ by 20 dBA if one sits 100 meters from SR-0079 SH and the other 500 meters away. The model captures this at 100-meter resolution, so noise exposure changes block by block.
  • Tree canopy can help reduce modeled noise exposure. Roughly 70% of Ruff Creek is under tree cover (much heavier than most cities), and the dominant land cover is deciduous forest. Both are measured from federal USDA Forest Service and USGS satellite imagery at 30-meter resolution. Streets with 60% or higher canopy show 3 to 5 dBA lower noise than comparable streets with bare ground or pavement, which is why the per-place decay rate above already accounts for it.

Sources & Methodology

The BestNeighborhood noise model is calibrated against nearly one million federal ground-truth measurements across four states. Road noise is computed from segment-level federal traffic data and propagated outward using physics-based acoustic decay, with attenuation rates that depend on the surrounding land cover.

Federal datasets used:

FHWA Highway Performance Monitoring System: road geometry, traffic counts, lane configuration
U.S. DoT Bureau of Transportation Statistics National Transportation Noise Map: aviation and rail noise, road calibration ground truth
USGS / MRLC National Land Cover Database: land cover and impervious surface coverage
USDA Forest Service Tree Canopy Cover: vegetation density for sound propagation
U.S. Census Bureau TIGER/Line: block-level geography and population
U.S. EPA Levels Document: 55 dBA outdoor reference level

All inputs are published federal datasets. Block-level noise is computed by combining road, rail, and aviation sound sources in the energy domain, the same physics used in professional environmental noise assessments. Read the full methodology.