Noise Levels in Saunders, Newport News, VA | Find Quiet Neighborhoods With Our Sound Map

60 dBA
Average noise across Saunders
Normal conversation an arm’s length away
2,094
Residents above the EPA 55 dBA threshold
56% of Saunders residents
80 dBA
Loudest residential point
City bus interior

This map shows modeled outdoor noise across Saunders at 100-meter resolution, combining road, aviation, and rail sources. Green areas measure below 45 dBA. Orange and red exceed the EPA's 55 dBA outdoor threshold linked to long-term health effects. Use the layer toggles to view each source on its own or all together.

Overall
Road
Rail
Aviation
Saunders, Newport News, VA Map of Noise Levels in Saunders
Click the map to explore
35 45 55 70 90
Quietest (dBA) Loudest
Colorblind friendly off

What the numbers sound like

  • 30 dBAWhisper
  • 40 dBASoft rainfall
  • 45 dBAQuiet suburban street at night
  • 50 dBAQuiet office
  • 55 dBAEPA outdoor threshold: light traffic 100 ft away
  • 60 dBANormal conversation an arm's length away
  • 65 dBABusy restaurant
  • 70 dBAHighway traffic 50 ft away
  • 80 dBACity bus interior

Population Above the EPA Outdoor Threshold

The EPA's 55 dBA outdoor reference level is a common benchmark for residential noise exposure, especially for activity interference, annoyance, and long-term community noise concerns. About 2,094 Saunders residents, or 55.9%, live above that level. By land area, 51.6% of Saunders is above 55 dBA.

See how noise in Saunders compares to similar-sized neighborhoods.

Noise by Part of Saunders

Average noise levels for Saunders residents, grouped by direction from the center of Saunders. Western Saunders carries the highest population-weighted average; Eastern Saunders carries the lowest. Just 17% of residents in Eastern Saunders live in blocks above the EPA's 55 dBA threshold, a fifth of the share in Western Saunders.

Central Saunders

61.9 dBA · Loud
Busy restaurant

57% of people above 55 dBA

QuietLoud

Eastern Saunders

52.3 dBA · Moderate
Quiet office to normal conversation

17% of people above 55 dBA

QuietLoud

Northern Saunders

54.1 dBA · Moderate-loud
Quiet office to normal conversation

30% of people above 55 dBA

QuietLoud

Southern Saunders

58.8 dBA · Loud
Normal conversation an arm’s length away

54% of people above 55 dBA

QuietLoud

Western Saunders

68.2 dBA · Loud
Highway traffic 50 ft away

94% of people above 55 dBA

QuietLoud

Western Saunders sounds about 201% louder than Eastern Saunders to the human ear, a 15.9 dBA gap. Every 10 dBA roughly doubles perceived loudness. Within any of these directions, two homes a quarter mile apart can still differ by 10 or more dBA depending on how close they sit to a major highway.

Loudest Road Corridors

The model evaluates every road in Saunders using federal traffic counts, posted speeds, heavy-truck ratios, and pavement type. The source level shown is the modeled noise at the road centerline, where it is loudest. Noise drops with distance, faster in vegetated areas and slower over open pavement.

RoadTypeAvg. source dBAPeak source dBA
I-64 Interstate 73.8 78
State Rte 168 Interstate 74.2 78
Harpersville Rd Major collector 61.5 62
Chatsworth Dr Local 58.0 58

How far back from I-64 do you need to be?

I-64 produces an estimated 78 dBA at its loudest centerline points. Noise drops logarithmically with distance, with the exact rate depending on what's between you and the road. Tree cover, walls, terrain, and pavement type all matter. At roughly a quarter mile back, traffic fades into the noise level of a quiet suburban street at night.

At source
78 dBA
City bus interior
165 ft
65 dBA
Busy restaurant
330 ft
57 dBA
Normal conversation an arm’s length away
660 ft
50 dBA
Quiet office
¼ mile
42 dBA
Quiet suburban street at night
½ mile
35 dBA
Soft rainfall

Calculated from the model's calibrated attenuation formula. About 49% of Saunders sits under tree canopy (much heavier than most neighborhoods) and roughly 37% is impervious surface like pavement and rooftops. Both are folded into the per-place decay rate above. Heavier canopy pulls noise down faster with distance; impervious surfaces slow the drop.

How Noise Is Distributed Across Saunders

The bar chart below shows the share of Saunders residents in each noise band. About 14% of residents live below the EPA's 55 dBA threshold, and roughly 30% live in blocks above 60 dBA. Long-term exposure in that range is linked to elevated stress hormones and cardiovascular risk.

How Saunders Compares

Saunders sits at the louder end of the spectrum. Below: how Saunders's average outdoor noise and share of residents above the EPA threshold compare with Briarfield, McIntosh, Newmarket South, and Jenkins.

Average noise level (dBA)

Saunders's 60.4 dBA pop-weighted average is at the louder end of the spectrum. Virginia as a whole averages 52.8 dBA and the U.S. averages 52.0 dBA. Both are lower than Saunders because most of either area is rural land away from major roads.

Share of residents above 55 dBA

About 55.9% of Saunders residents live in blocks where outdoor levels exceed the EPA's 55 dBA threshold. That's in the middle of its peer group. Measured by land area instead, 51.6% of Saunders's footprint sits above 55 dBA, against a Virginia average of 30.0% and a national average of 28.1%.

What This Means if You're Moving to Saunders

  • Distance from highways matters more than the neighborhood name. Two homes in the same zip code can differ by 20 dBA if one sits 100 meters from I-64 and the other 500 meters away. The model captures this at 100-meter resolution, so noise exposure changes block by block.
  • Tree canopy can help reduce modeled noise exposure. Roughly 49% of Saunders is under tree cover (much heavier than most neighborhoods), and the dominant land cover is low-density developed open space. Both are measured from federal USDA Forest Service and USGS satellite imagery at 30-meter resolution. Streets with 60% or higher canopy show 3 to 5 dBA lower noise than comparable streets with bare ground or pavement, which is why the per-place decay rate above already accounts for it.

Sources & Methodology

The BestNeighborhood noise model is calibrated against nearly one million federal ground-truth measurements across four states. Road noise is computed from segment-level federal traffic data and propagated outward using physics-based acoustic decay, with attenuation rates that depend on the surrounding land cover.

Federal datasets used:

FHWA Highway Performance Monitoring System: road geometry, traffic counts, lane configuration
U.S. DoT Bureau of Transportation Statistics National Transportation Noise Map: aviation and rail noise, road calibration ground truth
USGS / MRLC National Land Cover Database: land cover and impervious surface coverage
USDA Forest Service Tree Canopy Cover: vegetation density for sound propagation
U.S. Census Bureau TIGER/Line: block-level geography and population
U.S. EPA Levels Document: 55 dBA outdoor reference level

All inputs are published federal datasets. Block-level noise is computed by combining road, rail, and aviation sound sources in the energy domain, the same physics used in professional environmental noise assessments. Read the full methodology.