Noise Levels in Somers Point, NJ | Find Quiet Neighborhoods With Our Sound Map

49 dBA
Average noise across Somers Point
Quiet office
1,629
Residents above the EPA 55 dBA threshold
21% of Somers Point residents
77 dBA
Loudest residential point
City bus interior

This map shows modeled outdoor noise across Somers Point at 100-meter resolution, combining road, aviation, and rail sources. Green areas measure below 45 dBA. Orange and red exceed the EPA's 55 dBA outdoor threshold linked to long-term health effects. Use the layer toggles to view each source on its own or all together.

Overall
Road
Rail
Aviation
Somers Point, NJ Map of Noise Levels in Somers Point
Click the map to explore
35 45 55 70 90
Quietest (dBA) Loudest
Colorblind friendly off

What the numbers sound like

  • 30 dBAWhisper
  • 40 dBASoft rainfall
  • 45 dBAQuiet suburban street at night
  • 50 dBAQuiet office
  • 55 dBAEPA outdoor threshold: light traffic 100 ft away
  • 60 dBANormal conversation an arm's length away
  • 65 dBABusy restaurant
  • 70 dBAHighway traffic 50 ft away
  • 80 dBACity bus interior

Population Above the EPA Outdoor Threshold

The EPA's 55 dBA outdoor reference level is a common benchmark for residential noise exposure, especially for activity interference, annoyance, and long-term community noise concerns. About 1,629 Somers Point residents, or 20.6%, live above that level. By land area, 18.8% of Somers Point is above 55 dBA.

See how noise in Somers Point compares to similar-sized cities.

Noise by Part of Somers Point

Average noise levels for Somers Point residents, grouped by direction from the center of Somers Point. Southern Somers Point carries the highest population-weighted average; Eastern Somers Point carries the lowest. Just 26% of residents in Eastern Somers Point live in blocks above the EPA's 55 dBA threshold, roughly the same as the share in Southern Somers Point.

Central Somers Point

47.8 dBA · Mostly quiet
Quiet office

9% of people above 55 dBA

QuietLoud

Eastern Somers Point

46.9 dBA · Mostly quiet
Quiet office

26% of people above 55 dBA

QuietLoud

Northern Somers Point

48.1 dBA · Mostly quiet
Quiet office

8% of people above 55 dBA

QuietLoud

Southern Somers Point

52.1 dBA · Moderate
Quiet office to normal conversation

20% of people above 55 dBA

QuietLoud

Western Somers Point

51.3 dBA · Moderate
Quiet office to normal conversation

30% of people above 55 dBA

QuietLoud

Southern Somers Point sounds about 43% louder than Eastern Somers Point to the human ear, a 5.2 dBA gap. Every 10 dBA roughly doubles perceived loudness. Within any of these directions, two homes a quarter mile apart can still differ by 10 or more dBA depending on how close they sit to a major highway.

Loudest Road Corridors

The model evaluates every road in Somers Point using federal traffic counts, posted speeds, heavy-truck ratios, and pavement type. The source level shown is the modeled noise at the road centerline, where it is loudest. Noise drops with distance, faster in vegetated areas and slower over open pavement.

RoadTypeAvg. source dBAPeak source dBA
Garden State Pkwy Freeway 73.2 74
US-9 Principal arterial 63.1 64
Nj 52 Principal arterial 63.3 64
Route 585 Principal arterial 61.3 63
Nj 152 Principal arterial 62.8 63

How far back from Garden State Pkwy do you need to be?

Garden State Pkwy produces an estimated 74 dBA at its loudest centerline points. Noise drops logarithmically with distance, with the exact rate depending on what's between you and the road. Tree cover, walls, terrain, and pavement type all matter. At roughly a quarter mile back, traffic fades into the noise level of a soft rainfall.

At source
74 dBA
City bus interior
165 ft
61 dBA
Busy restaurant
330 ft
54 dBA
Quiet office to normal conversation
660 ft
46 dBA
Quiet office
¼ mile
39 dBA
Soft rainfall
½ mile
35 dBA
Soft rainfall

Calculated from the model's calibrated attenuation formula. About 24% of Somers Point sits under tree canopy (about average for cities) and roughly 41% is impervious surface like pavement and rooftops. Both are folded into the per-place decay rate above. Heavier canopy pulls noise down faster with distance; impervious surfaces slow the drop.

How Noise Is Distributed Across Somers Point

The bar chart below shows the share of Somers Point residents in each noise band. About 66% of residents live below the EPA's 55 dBA threshold, and roughly 19% live in blocks above 60 dBA. Long-term exposure in that range is linked to elevated stress hormones and cardiovascular risk.

How Somers Point Compares

Somers Point sits at the louder end of the spectrum. Below: how Somers Point's average outdoor noise and share of residents above the EPA threshold compare with Ocean City, Linwood, Northfield, and Pomona.

Average noise level (dBA)

Somers Point's 49.2 dBA pop-weighted average is at the louder end of the spectrum. New Jersey as a whole averages 49.8 dBA and the U.S. averages 52.0 dBA. Both are lower than Somers Point because most of either area is rural land away from major roads.

Share of residents above 55 dBA

About 20.6% of Somers Point residents live in blocks where outdoor levels exceed the EPA's 55 dBA threshold. That's more than any of its peer group. Measured by land area instead, 18.8% of Somers Point's footprint sits above 55 dBA, against a New Jersey average of 25.2% and a national average of 28.1%.

What This Means if You're Moving to Somers Point

  • Distance from highways matters more than the neighborhood name. Two homes in the same zip code can differ by 20 dBA if one sits 100 meters from Garden State Pkwy and the other 500 meters away. The model captures this at 100-meter resolution, so noise exposure changes block by block.
  • Tree canopy can help reduce modeled noise exposure. Roughly 24% of Somers Point is under tree cover (about average for cities), and the dominant land cover is low-intensity developed land. Both are measured from federal USDA Forest Service and USGS satellite imagery at 30-meter resolution. Streets with 60% or higher canopy show 3 to 5 dBA lower noise than comparable streets with bare ground or pavement, which is why the per-place decay rate above already accounts for it.

Sources & Methodology

The BestNeighborhood noise model is calibrated against nearly one million federal ground-truth measurements across four states. Road noise is computed from segment-level federal traffic data and propagated outward using physics-based acoustic decay, with attenuation rates that depend on the surrounding land cover.

Federal datasets used:

FHWA Highway Performance Monitoring System: road geometry, traffic counts, lane configuration
U.S. DoT Bureau of Transportation Statistics National Transportation Noise Map: aviation and rail noise, road calibration ground truth
USGS / MRLC National Land Cover Database: land cover and impervious surface coverage
USDA Forest Service Tree Canopy Cover: vegetation density for sound propagation
U.S. Census Bureau TIGER/Line: block-level geography and population
U.S. EPA Levels Document: 55 dBA outdoor reference level

All inputs are published federal datasets. Block-level noise is computed by combining road, rail, and aviation sound sources in the energy domain, the same physics used in professional environmental noise assessments. Read the full methodology.