Noise Levels in South Kensington, MD | Find Quiet Neighborhoods With Our Sound Map

55 dBA
Average noise across South Kensington
Quiet office to normal conversation
3,116
Residents above the EPA 55 dBA threshold
44% of South Kensington residents
82 dBA
Loudest residential point
Food blender at arm’s length

This map shows modeled outdoor noise across South Kensington at 100-meter resolution, combining road, aviation, and rail sources. Green areas measure below 45 dBA. Orange and red exceed the EPA's 55 dBA outdoor threshold linked to long-term health effects. Use the layer toggles to view each source on its own or all together.

Overall
Road
Rail
Aviation
South Kensington, MD Map of Noise Levels in South Kensington
Click the map to explore
35 45 55 70 90
Quietest (dBA) Loudest
Colorblind friendly off

What the numbers sound like

  • 30 dBAWhisper
  • 40 dBASoft rainfall
  • 45 dBAQuiet suburban street at night
  • 50 dBAQuiet office
  • 55 dBAEPA outdoor threshold: light traffic 100 ft away
  • 60 dBANormal conversation an arm's length away
  • 65 dBABusy restaurant
  • 70 dBAHighway traffic 50 ft away
  • 80 dBACity bus interior

Population Above the EPA Outdoor Threshold

The EPA's 55 dBA outdoor reference level is a common benchmark for residential noise exposure, especially for activity interference, annoyance, and long-term community noise concerns. About 3,116 South Kensington residents, or 43.8%, live above that level. By land area, 42.1% of South Kensington is above 55 dBA.

See how noise in South Kensington compares to similar-sized cities.

Noise by Part of South Kensington

Average noise levels for South Kensington residents, grouped by direction from the center of South Kensington. Eastern South Kensington carries the highest population-weighted average; Central South Kensington carries the lowest. Just 0% of residents in Central South Kensington live in blocks above the EPA's 55 dBA threshold, a fifth of the share in Eastern South Kensington.

Central South Kensington

50.5 dBA · Moderate
Quiet office

0% of people above 55 dBA

QuietLoud

Eastern South Kensington

56.2 dBA · Moderate-loud
Normal conversation an arm’s length away

50% of people above 55 dBA

QuietLoud

Northern South Kensington

53.4 dBA · Moderate-loud
Quiet office to normal conversation

41% of people above 55 dBA

QuietLoud

Southern South Kensington

55.9 dBA · Moderate-loud
Quiet office to normal conversation

55% of people above 55 dBA

QuietLoud

Western South Kensington

54.1 dBA · Moderate-loud
Quiet office to normal conversation

33% of people above 55 dBA

QuietLoud

Eastern South Kensington sounds about 48% louder than Central South Kensington to the human ear, a 5.7 dBA gap. Every 10 dBA roughly doubles perceived loudness. Within any of these directions, two homes a quarter mile apart can still differ by 10 or more dBA depending on how close they sit to a major highway.

How far back from I-495 do you need to be?

I-495 produces an estimated 79 dBA at its loudest centerline points. Noise drops logarithmically with distance, with the exact rate depending on what's between you and the road. Tree cover, walls, terrain, and pavement type all matter. At roughly a quarter mile back, traffic fades into the noise level of a soft rainfall.

At source
79 dBA
City bus interior
165 ft
65 dBA
Busy restaurant
330 ft
57 dBA
Normal conversation an arm’s length away
660 ft
49 dBA
Quiet office
¼ mile
41 dBA
Soft rainfall
½ mile
35 dBA
Soft rainfall

Calculated from the model's calibrated attenuation formula. About 54% of South Kensington sits under tree canopy (heavier than most cities) and roughly 17% is impervious surface like pavement and rooftops. Both are folded into the per-place decay rate above. Heavier canopy pulls noise down faster with distance; impervious surfaces slow the drop.

-->

Rail Noise

Active freight rail runs through parts of South Kensington. For most blocks the rail-only contribution is small. Combined road-plus-rail noise rarely exceeds road noise on its own. The exceptions are the handful of blocks within roughly a quarter mile of the right-of-way during pass-through hours.

Use the Rail toggle on the map above to isolate rail's contribution from road and aviation.

Airport Noise

Ronald Reagan Washington Ntl (DCA) sits south of South Kensington. The U.S. Department of Transportation measures aviation noise around this airport directly, and the model uses those federal measurements rather than synthetic predictions.

Blocks under the approach and departure paths carry combined road-plus-aviation noise, with some exceeding 75 dBA on the map's Overall layer. Blocks on the opposite side of South Kensington, particularly to the north, show no measurable aviation contribution. Use the Aviation toggle on the map above to isolate the airport's footprint.

How Noise Is Distributed Across South Kensington

The bar chart below shows the share of South Kensington residents in each noise band. About 56% of residents live below the EPA's 55 dBA threshold, and roughly 7% live in blocks above 60 dBA. Long-term exposure in that range is linked to elevated stress hormones and cardiovascular risk.

How South Kensington Compares

South Kensington sits at the louder end of the spectrum. Below: how South Kensington's average outdoor noise and share of residents above the EPA threshold compare with Four Corners, Mount Rainier, Calverton, and Derwood.

Average noise level (dBA)

South Kensington's 55.0 dBA pop-weighted average is at the louder end of the spectrum. Maryland as a whole averages 52.3 dBA and the U.S. averages 52.0 dBA. Both are lower than South Kensington because most of either area is rural land away from major roads.

Share of residents above 55 dBA

About 43.8% of South Kensington residents live in blocks where outdoor levels exceed the EPA's 55 dBA threshold. That's in the middle of its peer group. Measured by land area instead, 42.1% of South Kensington's footprint sits above 55 dBA, against a Maryland average of 32.9% and a national average of 28.1%.

What This Means if You're Moving to South Kensington

  • Distance from highways matters more than the neighborhood name. Two homes in the same zip code can differ by 20 dBA if one sits 100 meters from I-495 and the other 500 meters away. The model captures this at 100-meter resolution, so noise exposure changes block by block.
  • Tree canopy can help reduce modeled noise exposure. Roughly 54% of South Kensington is under tree cover (heavier than most cities), and the dominant land cover is low-density developed open space. Both are measured from federal USDA Forest Service and USGS satellite imagery at 30-meter resolution. Streets with 60% or higher canopy show 3 to 5 dBA lower noise than comparable streets with bare ground or pavement, which is why the per-place decay rate above already accounts for it.
  • Airport noise is directional. Ronald Reagan Washington Ntl's approach paths concentrate aviation noise to the south. Neighborhoods to the north of downtown show no measurable contribution from the airport.

Sources & Methodology

The BestNeighborhood noise model is calibrated against nearly one million federal ground-truth measurements across four states. Road noise is computed from segment-level federal traffic data and propagated outward using physics-based acoustic decay, with attenuation rates that depend on the surrounding land cover.

Federal datasets used:

FHWA Highway Performance Monitoring System: road geometry, traffic counts, lane configuration
U.S. DoT Bureau of Transportation Statistics National Transportation Noise Map: aviation and rail noise, road calibration ground truth
USGS / MRLC National Land Cover Database: land cover and impervious surface coverage
USDA Forest Service Tree Canopy Cover: vegetation density for sound propagation
U.S. Census Bureau TIGER/Line: block-level geography and population
U.S. EPA Levels Document: 55 dBA outdoor reference level

All inputs are published federal datasets. Block-level noise is computed by combining road, rail, and aviation sound sources in the energy domain, the same physics used in professional environmental noise assessments. Read the full methodology.