Noise Levels in St. George, MO | Find Quiet Neighborhoods With Our Sound Map
64 dBA
Average noise across St. George
Busy restaurant
1,715
Residents above the EPA 55 dBA threshold
82% of St. George residents
84 dBA
Loudest residential point
Food blender at arm’s length
This map shows modeled outdoor noise across St. George at 100-meter resolution, combining road, aviation, and rail sources. Green areas measure below 45 dBA. Orange and red exceed the EPA's 55 dBA outdoor threshold linked to long-term health effects. Use the layer toggles to view each source on its own or all together.
Overall
Road
Rail
Aviation
Click the map to explore
35 dBa55 dBa (EPA limit)90+ dBa
3545557090
Quietest (dBA)Loudest
Colorblind friendlyoff
What the numbers sound like
30 dBAWhisper
40 dBASoft rainfall
45 dBAQuiet suburban street at night
50 dBAQuiet office
55 dBAEPA outdoor threshold: light traffic 100 ft away
60 dBANormal conversation an arm's length away
65 dBABusy restaurant
70 dBAHighway traffic 50 ft away
80 dBACity bus interior
Population Above the EPA Outdoor Threshold
The EPA's 55 dBA outdoor reference level is a common benchmark for residential noise exposure, especially for activity interference, annoyance, and long-term community noise concerns. About 1,715 St. George residents, or 81.8%, live above that level. By land area, 82.1% of St. George is above 55 dBA.
Average noise levels for St. George residents, grouped by direction from the center of St. George. Eastern St. George carries the highest population-weighted average; Northern St. George carries the lowest. Just 25% of residents in Northern St. George live in blocks above the EPA's 55 dBA threshold, a third of the share in Eastern St. George.
Central St. George
62.8 dBA · Loud
Busy restaurant
86% of people above 55 dBA
QuietLoud
Eastern St. George
75.7 dBA · Loud
City bus interior
100% of people above 55 dBA
QuietLoud
Northern St. George
52.2 dBA · Moderate
Quiet office to normal conversation
25% of people above 55 dBA
QuietLoud
Southern St. George
72.5 dBA · Loud
City bus interior
95% of people above 55 dBA
QuietLoud
Eastern St. George sounds about 410% louder than Northern St. George to the human ear, a 23.5 dBA gap. Every 10 dBA roughly doubles perceived loudness. Within any of these directions, two homes a quarter mile apart can still differ by 10 or more dBA depending on how close they sit to a major highway.
How far back from do you need to be?
produces an estimated 84 dBA at its loudest centerline points. Noise drops logarithmically with distance, with the exact rate depending on what's between you and the road. Tree cover, walls, terrain, and pavement type all matter. At roughly a quarter mile back, traffic fades into the noise level of a quiet suburban street at night.
At source
84 dBA
Food blender at arm’s length
165 ft
69 dBA
Highway traffic 50 ft away
330 ft
61 dBA
Busy restaurant
660 ft
53 dBA
Quiet office to normal conversation
¼ mile
45 dBA
Quiet suburban street at night
½ mile
37 dBA
Soft rainfall
Calculated from the model's calibrated attenuation formula. About 20% of St. George sits under tree canopy (lighter than most cities) and roughly 50% is impervious surface like pavement and rooftops. Both are folded into the per-place decay rate above. Heavier canopy pulls noise down faster with distance; impervious surfaces slow the drop.
-->
Airport Noise
St Louis Lambert International (STL) sits north of St. George. The U.S. Department of Transportation models aviation noise around this airport from federal traffic data, and the model uses those federal measurements rather than synthetic predictions.
Blocks under the approach and departure paths carry combined road-plus-aviation noise, with some exceeding 65 dBA on the map's Overall layer. Blocks on the opposite side of St. George, particularly to the south, show no measurable aviation contribution. Use the Aviation toggle on the map above to isolate the airport's footprint.
How Noise Is Distributed Across St. George
The bar chart below shows the share of St. George residents in each noise band. About 14% of residents live below the EPA's 55 dBA threshold, and roughly 60% live in blocks above 60 dBA. Long-term exposure in that range is linked to elevated stress hormones and cardiovascular risk.
How St. George Compares
St. George sits the highest among the peer group. Below: how St. George's average outdoor noise and share of residents above the EPA threshold compare with Marlborough, Warson Woods, Lakeshire, and Pagedale.
Average noise level (dBA)
St. George's 64.0 dBA pop-weighted average is the highest among the peer group. Missouri as a whole averages 53.9 dBA and the U.S. averages 52.0 dBA. Both are lower than St. George because most of either area is rural land away from major roads.
Share of residents above 55 dBA
About 81.8% of St. George residents live in blocks where outdoor levels exceed the EPA's 55 dBA threshold. That's more than any of its peer group. Measured by land area instead, 82.1% of St. George's footprint sits above 55 dBA, against a Missouri average of 32.5% and a national average of 28.1%.
What This Means if You're Moving to St. George
Distance from highways matters more than the neighborhood name. Two homes in the same zip code can differ by 20 dBA if one sits 100 meters from and the other 500 meters away. The model captures this at 100-meter resolution, so noise exposure changes block by block.
Tree canopy can help reduce modeled noise exposure. Roughly 20% of St. George is under tree cover (lighter than most cities), and the dominant land cover is low-intensity developed land. Both are measured from federal USDA Forest Service and USGS satellite imagery at 30-meter resolution. Streets with 60% or higher canopy show 3 to 5 dBA lower noise than comparable streets with bare ground or pavement, which is why the per-place decay rate above already accounts for it.
Airport noise is directional. St Louis Lambert International's approach paths concentrate aviation noise to the north. Neighborhoods to the south of downtown show no measurable contribution from the airport.
Sources & Methodology
The BestNeighborhood noise model is calibrated against nearly one million federal ground-truth measurements across four states. Road noise is computed from segment-level federal traffic data and propagated outward using physics-based acoustic decay, with attenuation rates that depend on the surrounding land cover.
All inputs are published federal datasets. Block-level noise is computed by combining road, rail, and aviation sound sources in the energy domain, the same physics used in professional environmental noise assessments. Read the full methodology.
