Noise Levels in Summit Place in Naples, Naples, FL | Find Quiet Neighborhoods With Our Sound Map

50 dBA
Average noise across Summit Place in Naples
Quiet office
216
Residents above the EPA 55 dBA threshold
8% of Summit Place in Naples residents
68 dBA
Loudest residential point
Highway traffic 50 ft away

This map shows modeled outdoor noise across Summit Place in Naples at 100-meter resolution, combining road, aviation, and rail sources. Green areas measure below 45 dBA. Orange and red exceed the EPA's 55 dBA outdoor threshold linked to long-term health effects. Use the layer toggles to view each source on its own or all together.

Overall
Road
Rail
Aviation
Summit Place in Naples, Naples, FL Map of Noise Levels in Summit Place in Naples
Click the map to explore
35 45 55 70 90
Quietest (dBA) Loudest
Colorblind friendly off

What the numbers sound like

  • 30 dBAWhisper
  • 40 dBASoft rainfall
  • 45 dBAQuiet suburban street at night
  • 50 dBAQuiet office
  • 55 dBAEPA outdoor threshold: light traffic 100 ft away
  • 60 dBANormal conversation an arm's length away
  • 65 dBABusy restaurant
  • 70 dBAHighway traffic 50 ft away
  • 80 dBACity bus interior

Population Above the EPA Outdoor Threshold

The EPA's 55 dBA outdoor reference level is a common benchmark for residential noise exposure, especially for activity interference, annoyance, and long-term community noise concerns. About 216 Summit Place in Naples residents, or 7.8%, live above that level. By land area, 4.6% of Summit Place in Naples is above 55 dBA.

See how noise in Summit Place in Naples compares to similar-sized neighborhoods.

Noise by Part of Summit Place in Naples

Average noise levels for Summit Place in Naples residents, grouped by direction from the center of Summit Place in Naples. Southern Summit Place in Naples carries the highest population-weighted average; Eastern Summit Place in Naples carries the lowest. Just 0% of residents in Eastern Summit Place in Naples live in blocks above the EPA's 55 dBA threshold, a fifth of the share in Southern Summit Place in Naples.

Central Summit Place in Naples

51.3 dBA · Moderate
Quiet office to normal conversation

9% of people above 55 dBA

QuietLoud

Eastern Summit Place in Naples

32.7 dBA · Quiet
Whisper

0% of people above 55 dBA

QuietLoud

Northern Summit Place in Naples

41.8 dBA · Quiet
Quiet suburban street at night

0% of people above 55 dBA

QuietLoud

Southern Summit Place in Naples

55.6 dBA · Moderate-loud
Quiet office to normal conversation

15% of people above 55 dBA

QuietLoud

Western Summit Place in Naples

39.9 dBA · Quiet
Soft rainfall

0% of people above 55 dBA

QuietLoud

Southern Summit Place in Naples sounds about 389% louder than Eastern Summit Place in Naples to the human ear, a 22.9 dBA gap. Every 10 dBA roughly doubles perceived loudness. Within any of these directions, two homes a quarter mile apart can still differ by 10 or more dBA depending on how close they sit to a major highway.

How far back from do you need to be?

produces an estimated 68 dBA at its loudest centerline points. Noise drops logarithmically with distance, with the exact rate depending on what's between you and the road. Tree cover, walls, terrain, and pavement type all matter. At roughly a quarter mile back, traffic fades into the noise level of a soft rainfall.

At source
68 dBA
Highway traffic 50 ft away
165 ft
55 dBA
Quiet office to normal conversation
330 ft
48 dBA
Quiet office
660 ft
40 dBA
Soft rainfall
¼ mile
35 dBA
Soft rainfall
½ mile
35 dBA
Soft rainfall

Calculated from the model's calibrated attenuation formula. About 28% of Summit Place in Naples sits under tree canopy (heavier than most neighborhoods) and roughly 26% is impervious surface like pavement and rooftops. Both are folded into the per-place decay rate above. Heavier canopy pulls noise down faster with distance; impervious surfaces slow the drop.

-->

How Noise Is Distributed Across Summit Place in Naples

The bar chart below shows the share of Summit Place in Naples residents in each noise band. About 91% of residents live below the EPA's 55 dBA threshold, and roughly 0% live in blocks above 60 dBA. Long-term exposure in that range is linked to elevated stress hormones and cardiovascular risk.

How Summit Place in Naples Compares

Summit Place in Naples sits at the quieter end of the spectrum. Below: how Summit Place in Naples's average outdoor noise and share of residents above the EPA threshold compare with wilshire-lakes-naples-fl, Pelican Marsh, heritage-bay-naples-fl, and Orangetree.

Average noise level (dBA)

Summit Place in Naples's 49.5 dBA pop-weighted average is at the quieter end of the spectrum. Florida as a whole averages 51.6 dBA and the U.S. averages 52.0 dBA. Both are lower than Summit Place in Naples because most of either area is rural land away from major roads.

Share of residents above 55 dBA

About 7.8% of Summit Place in Naples residents live in blocks where outdoor levels exceed the EPA's 55 dBA threshold. That's in the middle of its peer group. Measured by land area instead, 4.6% of Summit Place in Naples's footprint sits above 55 dBA, against a Florida average of 31.8% and a national average of 28.1%.

What This Means if You're Moving to Summit Place in Naples

  • Distance from highways matters more than the neighborhood name. Two homes in the same zip code can differ by 20 dBA if one sits 100 meters from and the other 500 meters away. The model captures this at 100-meter resolution, so noise exposure changes block by block.
  • Tree canopy can help reduce modeled noise exposure. Roughly 28% of Summit Place in Naples is under tree cover (heavier than most neighborhoods), and the dominant land cover is woody wetlands. Both are measured from federal USDA Forest Service and USGS satellite imagery at 30-meter resolution. Streets with 60% or higher canopy show 3 to 5 dBA lower noise than comparable streets with bare ground or pavement, which is why the per-place decay rate above already accounts for it.

Sources & Methodology

The BestNeighborhood noise model is calibrated against nearly one million federal ground-truth measurements across four states. Road noise is computed from segment-level federal traffic data and propagated outward using physics-based acoustic decay, with attenuation rates that depend on the surrounding land cover.

Federal datasets used:

FHWA Highway Performance Monitoring System: road geometry, traffic counts, lane configuration
U.S. DoT Bureau of Transportation Statistics National Transportation Noise Map: aviation and rail noise, road calibration ground truth
USGS / MRLC National Land Cover Database: land cover and impervious surface coverage
USDA Forest Service Tree Canopy Cover: vegetation density for sound propagation
U.S. Census Bureau TIGER/Line: block-level geography and population
U.S. EPA Levels Document: 55 dBA outdoor reference level

All inputs are published federal datasets. Block-level noise is computed by combining road, rail, and aviation sound sources in the energy domain, the same physics used in professional environmental noise assessments. Read the full methodology.