Noise Levels in Sunset Heights, Orem, UT | Find Quiet Neighborhoods With Our Sound Map

53 dBA
Average noise across Sunset Heights
Quiet office to normal conversation
3,243
Residents above the EPA 55 dBA threshold
38% of Sunset Heights residents
83 dBA
Loudest residential point
Food blender at arm’s length

This map shows modeled outdoor noise across Sunset Heights at 100-meter resolution, combining road, aviation, and rail sources. Green areas measure below 45 dBA. Orange and red exceed the EPA's 55 dBA outdoor threshold linked to long-term health effects. Use the layer toggles to view each source on its own or all together.

Overall
Road
Rail
Aviation
Sunset Heights, Orem, UT Map of Noise Levels in Sunset Heights
Click the map to explore
35 45 55 70 90
Quietest (dBA) Loudest
Colorblind friendly off

What the numbers sound like

  • 30 dBAWhisper
  • 40 dBASoft rainfall
  • 45 dBAQuiet suburban street at night
  • 50 dBAQuiet office
  • 55 dBAEPA outdoor threshold: light traffic 100 ft away
  • 60 dBANormal conversation an arm's length away
  • 65 dBABusy restaurant
  • 70 dBAHighway traffic 50 ft away
  • 80 dBACity bus interior

Population Above the EPA Outdoor Threshold

The EPA's 55 dBA outdoor reference level is a common benchmark for residential noise exposure, especially for activity interference, annoyance, and long-term community noise concerns. About 3,243 Sunset Heights residents, or 38.1%, live above that level. By land area, 41.7% of Sunset Heights is above 55 dBA.

See how noise in Sunset Heights compares to similar-sized neighborhoods.

Noise by Part of Sunset Heights

Average noise levels for Sunset Heights residents, grouped by direction from the center of Sunset Heights. Southern Sunset Heights carries the highest population-weighted average; Western Sunset Heights carries the lowest. Just 11% of residents in Western Sunset Heights live in blocks above the EPA's 55 dBA threshold, a fifth of the share in Southern Sunset Heights.

Central Sunset Heights

57.6 dBA · Moderate-loud
Normal conversation an arm’s length away

54% of people above 55 dBA

QuietLoud

Eastern Sunset Heights

57.3 dBA · Moderate-loud
Normal conversation an arm’s length away

48% of people above 55 dBA

QuietLoud

Northern Sunset Heights

58.7 dBA · Loud
Normal conversation an arm’s length away

82% of people above 55 dBA

QuietLoud

Southern Sunset Heights

60.7 dBA · Loud
Normal conversation an arm’s length away

71% of people above 55 dBA

QuietLoud

Western Sunset Heights

45.0 dBA · Mostly quiet
Quiet suburban street at night

11% of people above 55 dBA

QuietLoud

Southern Sunset Heights sounds about 197% louder than Western Sunset Heights to the human ear, a 15.7 dBA gap. Every 10 dBA roughly doubles perceived loudness. Within any of these directions, two homes a quarter mile apart can still differ by 10 or more dBA depending on how close they sit to a major highway.

How far back from I-15 do you need to be?

I-15 produces an estimated 75 dBA at its loudest centerline points. Noise drops logarithmically with distance, with the exact rate depending on what's between you and the road. Tree cover, walls, terrain, and pavement type all matter. At roughly a quarter mile back, traffic fades into the noise level of a soft rainfall.

At source
75 dBA
City bus interior
165 ft
60 dBA
Normal conversation an arm’s length away
330 ft
52 dBA
Quiet office to normal conversation
660 ft
43 dBA
Quiet suburban street at night
¼ mile
35 dBA
Soft rainfall
½ mile
35 dBA
Soft rainfall

Calculated from the model's calibrated attenuation formula. About 5% of Sunset Heights sits under tree canopy (lighter than most neighborhoods) and roughly 48% is impervious surface like pavement and rooftops. Both are folded into the per-place decay rate above. Heavier canopy pulls noise down faster with distance; impervious surfaces slow the drop.

-->

Rail Noise

Active freight rail runs through parts of Sunset Heights. For most blocks the rail-only contribution is small. Combined road-plus-rail noise rarely exceeds road noise on its own. The exceptions are the handful of blocks within roughly a quarter mile of the right-of-way during pass-through hours.

Use the Rail toggle on the map above to isolate rail's contribution from road and aviation.

Airport Noise

Provo Municipal (PVU) sits south of Sunset Heights. The U.S. Department of Transportation models aviation noise around this airport from federal traffic data, and the model uses those federal measurements rather than synthetic predictions.

Blocks under the approach and departure paths carry combined road-plus-aviation noise, with some exceeding 45 dBA on the map's Overall layer. Blocks on the opposite side of Sunset Heights, particularly to the north, show no measurable aviation contribution. Use the Aviation toggle on the map above to isolate the airport's footprint.

How Noise Is Distributed Across Sunset Heights

The bar chart below shows the share of Sunset Heights residents in each noise band. About 47% of residents live below the EPA's 55 dBA threshold, and roughly 21% live in blocks above 60 dBA. Long-term exposure in that range is linked to elevated stress hormones and cardiovascular risk.

How Sunset Heights Compares

Sunset Heights sits at the quieter end of the spectrum. Below: how Sunset Heights's average outdoor noise and share of residents above the EPA threshold compare with Bonneville, Carterville, Joaquin, and Tree Streets.

Average noise level (dBA)

Sunset Heights's 53.2 dBA pop-weighted average is at the quieter end of the spectrum. Utah as a whole averages 53.1 dBA and the U.S. averages 52.0 dBA. Both are lower than Sunset Heights because most of either area is rural land away from major roads.

Share of residents above 55 dBA

About 38.1% of Sunset Heights residents live in blocks where outdoor levels exceed the EPA's 55 dBA threshold. That's in the middle of its peer group. Measured by land area instead, 41.7% of Sunset Heights's footprint sits above 55 dBA, against a Utah average of 25.8% and a national average of 28.1%.

What This Means if You're Moving to Sunset Heights

  • Distance from highways matters more than the neighborhood name. Two homes in the same zip code can differ by 20 dBA if one sits 100 meters from I-15 and the other 500 meters away. The model captures this at 100-meter resolution, so noise exposure changes block by block.
  • Tree canopy can help reduce modeled noise exposure. Roughly 5% of Sunset Heights is under tree cover (lighter than most neighborhoods), and the dominant land cover is medium-intensity developed land. Both are measured from federal USDA Forest Service and USGS satellite imagery at 30-meter resolution. Streets with 60% or higher canopy show 3 to 5 dBA lower noise than comparable streets with bare ground or pavement, which is why the per-place decay rate above already accounts for it.
  • Airport noise is directional. Provo Municipal's approach paths concentrate aviation noise to the south. Neighborhoods to the north of downtown show no measurable contribution from the airport.

Sources & Methodology

The BestNeighborhood noise model is calibrated against nearly one million federal ground-truth measurements across four states. Road noise is computed from segment-level federal traffic data and propagated outward using physics-based acoustic decay, with attenuation rates that depend on the surrounding land cover.

Federal datasets used:

FHWA Highway Performance Monitoring System: road geometry, traffic counts, lane configuration
U.S. DoT Bureau of Transportation Statistics National Transportation Noise Map: aviation and rail noise, road calibration ground truth
USGS / MRLC National Land Cover Database: land cover and impervious surface coverage
USDA Forest Service Tree Canopy Cover: vegetation density for sound propagation
U.S. Census Bureau TIGER/Line: block-level geography and population
U.S. EPA Levels Document: 55 dBA outdoor reference level

All inputs are published federal datasets. Block-level noise is computed by combining road, rail, and aviation sound sources in the energy domain, the same physics used in professional environmental noise assessments. Read the full methodology.