Noise Levels in Downtown Menlo Park, Menlo Park, CA | Find Quiet Neighborhoods With Our Sound Map

55 dBA
Average noise across Downtown Menlo Park
Quiet office to normal conversation
1,311
Residents above the EPA 55 dBA threshold
41% of Downtown Menlo Park residents
74 dBA
Loudest residential point
City bus interior

This map shows modeled outdoor noise across Downtown Menlo Park at 100-meter resolution, combining road, aviation, and rail sources. Green areas measure below 45 dBA. Orange and red exceed the EPA's 55 dBA outdoor threshold linked to long-term health effects. Use the layer toggles to view each source on its own or all together.

Overall
Road
Rail
Aviation
Downtown Menlo Park, Menlo Park, CA Map of Noise Levels in Downtown Menlo Park
Click the map to explore
35 45 55 70 90
Quietest (dBA) Loudest
Colorblind friendly off

What the numbers sound like

  • 30 dBAWhisper
  • 40 dBASoft rainfall
  • 45 dBAQuiet suburban street at night
  • 50 dBAQuiet office
  • 55 dBAEPA outdoor threshold: light traffic 100 ft away
  • 60 dBANormal conversation an arm's length away
  • 65 dBABusy restaurant
  • 70 dBAHighway traffic 50 ft away
  • 80 dBACity bus interior

Population Above the EPA Outdoor Threshold

The EPA's 55 dBA outdoor reference level is a common benchmark for residential noise exposure, especially for activity interference, annoyance, and long-term community noise concerns. About 1,311 Downtown Menlo Park residents, or 41.3%, live above that level. By land area, 51.7% of Downtown Menlo Park is above 55 dBA.

See how noise in Downtown Menlo Park compares to similar-sized neighborhoods.

Noise by Part of Downtown Menlo Park

Average noise levels for Downtown Menlo Park residents, grouped by direction from the center of Downtown Menlo Park. Northern Downtown Menlo Park carries the highest population-weighted average; Western Downtown Menlo Park carries the lowest. Just 0% of residents in Western Downtown Menlo Park live in blocks above the EPA's 55 dBA threshold, a fifth of the share in Northern Downtown Menlo Park.

Central Downtown Menlo Park

54.1 dBA · Moderate-loud
Quiet office to normal conversation

40% of people above 55 dBA

QuietLoud

Eastern Downtown Menlo Park

53.1 dBA · Moderate-loud
Quiet office to normal conversation

20% of people above 55 dBA

QuietLoud

Northern Downtown Menlo Park

59.7 dBA · Loud
Normal conversation an arm’s length away

62% of people above 55 dBA

QuietLoud

Southern Downtown Menlo Park

51.8 dBA · Moderate
Quiet office to normal conversation

37% of people above 55 dBA

QuietLoud

Western Downtown Menlo Park

49.3 dBA · Mostly quiet
Quiet office

0% of people above 55 dBA

QuietLoud

Northern Downtown Menlo Park sounds about 106% louder than Western Downtown Menlo Park to the human ear, a 10.4 dBA gap. Every 10 dBA roughly doubles perceived loudness. Within any of these directions, two homes a quarter mile apart can still differ by 10 or more dBA depending on how close they sit to a major highway.

How far back from do you need to be?

produces an estimated 74 dBA at its loudest centerline points. Noise drops logarithmically with distance, with the exact rate depending on what's between you and the road. Tree cover, walls, terrain, and pavement type all matter. At roughly a quarter mile back, traffic fades into the noise level of a soft rainfall.

At source
74 dBA
City bus interior
165 ft
60 dBA
Normal conversation an arm’s length away
330 ft
52 dBA
Quiet office to normal conversation
660 ft
45 dBA
Quiet suburban street at night
¼ mile
37 dBA
Soft rainfall
½ mile
35 dBA
Soft rainfall

Calculated from the model's calibrated attenuation formula. About 18% of Downtown Menlo Park sits under tree canopy (about average for neighborhoods) and roughly 52% is impervious surface like pavement and rooftops. Both are folded into the per-place decay rate above. Heavier canopy pulls noise down faster with distance; impervious surfaces slow the drop.

-->

Rail Noise

Active freight rail runs through parts of Downtown Menlo Park. For most blocks the rail-only contribution is small. Combined road-plus-rail noise rarely exceeds road noise on its own. The exceptions are the handful of blocks within roughly a quarter mile of the right-of-way during pass-through hours.

Use the Rail toggle on the map above to isolate rail's contribution from road and aviation.

Airport Noise

Norman Y Mineta San Jose International (SJC) sits southeast of Downtown Menlo Park. The U.S. Department of Transportation models aviation noise around this airport from federal traffic data, and the model uses those federal measurements rather than synthetic predictions.

Blocks under the approach and departure paths carry combined road-plus-aviation noise, with some exceeding 65 dBA on the map's Overall layer. Blocks on the opposite side of Downtown Menlo Park, particularly to the northwest, show no measurable aviation contribution. Use the Aviation toggle on the map above to isolate the airport's footprint.

How Noise Is Distributed Across Downtown Menlo Park

The bar chart below shows the share of Downtown Menlo Park residents in each noise band. About 79% of residents live below the EPA's 55 dBA threshold, and roughly 8% live in blocks above 60 dBA. Long-term exposure in that range is linked to elevated stress hormones and cardiovascular risk.

How Downtown Menlo Park Compares

Downtown Menlo Park sits at the quieter end of the spectrum. Below: how Downtown Menlo Park's average outdoor noise and share of residents above the EPA threshold compare with Crescent Park, Downtown North San Jose, University South, and Duveneck-Saint Francis.

Average noise level (dBA)

Downtown Menlo Park's 54.7 dBA pop-weighted average is at the quieter end of the spectrum. California as a whole averages 54.0 dBA and the U.S. averages 52.0 dBA. Both are lower than Downtown Menlo Park because most of either area is rural land away from major roads.

Share of residents above 55 dBA

About 41.3% of Downtown Menlo Park residents live in blocks where outdoor levels exceed the EPA's 55 dBA threshold. That's in the middle of its peer group. Measured by land area instead, 51.7% of Downtown Menlo Park's footprint sits above 55 dBA, against a California average of 36.0% and a national average of 28.1%.

What This Means if You're Moving to Downtown Menlo Park

  • Distance from highways matters more than the neighborhood name. Two homes in the same zip code can differ by 20 dBA if one sits 100 meters from and the other 500 meters away. The model captures this at 100-meter resolution, so noise exposure changes block by block.
  • Tree canopy can help reduce modeled noise exposure. Roughly 18% of Downtown Menlo Park is under tree cover (about average for neighborhoods), and the dominant land cover is medium-intensity developed land. Both are measured from federal USDA Forest Service and USGS satellite imagery at 30-meter resolution. Streets with 60% or higher canopy show 3 to 5 dBA lower noise than comparable streets with bare ground or pavement, which is why the per-place decay rate above already accounts for it.
  • Airport noise is directional. Norman Y Mineta San Jose International's approach paths concentrate aviation noise to the southeast. Neighborhoods to the northwest of downtown show no measurable contribution from the airport.

Sources & Methodology

The BestNeighborhood noise model is calibrated against nearly one million federal ground-truth measurements across four states. Road noise is computed from segment-level federal traffic data and propagated outward using physics-based acoustic decay, with attenuation rates that depend on the surrounding land cover.

Federal datasets used:

FHWA Highway Performance Monitoring System: road geometry, traffic counts, lane configuration
U.S. DoT Bureau of Transportation Statistics National Transportation Noise Map: aviation and rail noise, road calibration ground truth
USGS / MRLC National Land Cover Database: land cover and impervious surface coverage
USDA Forest Service Tree Canopy Cover: vegetation density for sound propagation
U.S. Census Bureau TIGER/Line: block-level geography and population
U.S. EPA Levels Document: 55 dBA outdoor reference level

All inputs are published federal datasets. Block-level noise is computed by combining road, rail, and aviation sound sources in the energy domain, the same physics used in professional environmental noise assessments. Read the full methodology.