Noise Levels in Franklin Town, MA | Find Quiet Neighborhoods With Our Sound Map

53 dBA
Average noise across Franklin Town
Quiet office to normal conversation
8,261
Residents above the EPA 55 dBA threshold
26% of Franklin Town residents
99 dBA
Loudest residential point
Power saw

This map shows modeled outdoor noise across Franklin Town at 100-meter resolution, combining road, aviation, and rail sources. Green areas measure below 45 dBA. Orange and red exceed the EPA's 55 dBA outdoor threshold linked to long-term health effects. Use the layer toggles to view each source on its own or all together.

Overall
Road
Rail
Aviation
Franklin Town, MA Map of Noise Levels in Franklin Town
Click the map to explore
35 45 55 70 90
Quietest (dBA) Loudest
Colorblind friendly off

What the numbers sound like

  • 30 dBAWhisper
  • 40 dBASoft rainfall
  • 45 dBAQuiet suburban street at night
  • 50 dBAQuiet office
  • 55 dBAEPA outdoor threshold: light traffic 100 ft away
  • 60 dBANormal conversation an arm's length away
  • 65 dBABusy restaurant
  • 70 dBAHighway traffic 50 ft away
  • 80 dBACity bus interior

Population Above the EPA Outdoor Threshold

The EPA's 55 dBA outdoor reference level is a common benchmark for residential noise exposure, especially for activity interference, annoyance, and long-term community noise concerns. About 8,261 Franklin Town residents, or 26.3%, live above that level. By land area, 35.3% of Franklin Town is above 55 dBA.

See how noise in Franklin Town compares to similar-sized cities.

Noise by Part of Franklin Town

Average noise levels for Franklin Town residents, grouped by direction from the center of Franklin Town. Southern Franklin Town carries the highest population-weighted average; Northern Franklin Town carries the lowest. Just 13% of residents in Northern Franklin Town live in blocks above the EPA's 55 dBA threshold, a third of the share in Southern Franklin Town.

Central Franklin Town

55.0 dBA · Moderate-loud
Quiet office to normal conversation

34% of people above 55 dBA

QuietLoud

Eastern Franklin Town

53.4 dBA · Moderate-loud
Quiet office to normal conversation

26% of people above 55 dBA

QuietLoud

Northern Franklin Town

49.9 dBA · Mostly quiet
Quiet office

13% of people above 55 dBA

QuietLoud

Southern Franklin Town

55.4 dBA · Moderate-loud
Quiet office to normal conversation

39% of people above 55 dBA

QuietLoud

Western Franklin Town

55.0 dBA · Moderate-loud
Quiet office to normal conversation

29% of people above 55 dBA

QuietLoud

Southern Franklin Town sounds about 46% louder than Northern Franklin Town to the human ear, a 5.5 dBA gap. Every 10 dBA roughly doubles perceived loudness. Within any of these directions, two homes a quarter mile apart can still differ by 10 or more dBA depending on how close they sit to a major highway.

How far back from I-495 do you need to be?

I-495 produces an estimated 77 dBA at its loudest centerline points. Noise drops logarithmically with distance, with the exact rate depending on what's between you and the road. Tree cover, walls, terrain, and pavement type all matter. At roughly a quarter mile back, traffic fades into the noise level of a soft rainfall.

At source
77 dBA
City bus interior
165 ft
62 dBA
Busy restaurant
330 ft
53 dBA
Quiet office to normal conversation
660 ft
45 dBA
Quiet suburban street at night
¼ mile
36 dBA
Soft rainfall
½ mile
35 dBA
Soft rainfall

Calculated from the model's calibrated attenuation formula. About 58% of Franklin Town sits under tree canopy (heavier than most cities) and roughly 17% is impervious surface like pavement and rooftops. Both are folded into the per-place decay rate above. Heavier canopy pulls noise down faster with distance; impervious surfaces slow the drop.

-->

Rail Noise

Active freight rail runs through parts of Franklin Town. For most blocks the rail-only contribution is small. Combined road-plus-rail noise rarely exceeds road noise on its own. The exceptions are the handful of blocks within roughly a quarter mile of the right-of-way during pass-through hours.

Use the Rail toggle on the map above to isolate rail's contribution from road and aviation.

Airport Noise

General Edward Lawrence Logan International (BOS) sits northeast of Franklin Town. The U.S. Department of Transportation measures aviation noise around this airport directly, and the model uses those federal measurements rather than synthetic predictions.

Blocks under the approach and departure paths carry combined road-plus-aviation noise, with some exceeding 75 dBA on the map's Overall layer. Blocks on the opposite side of Franklin Town, particularly to the southwest, show no measurable aviation contribution. Use the Aviation toggle on the map above to isolate the airport's footprint.

How Noise Is Distributed Across Franklin Town

The bar chart below shows the share of Franklin Town residents in each noise band. About 71% of residents live below the EPA's 55 dBA threshold, and roughly 8% live in blocks above 60 dBA. Long-term exposure in that range is linked to elevated stress hormones and cardiovascular risk.

How Franklin Town Compares

Franklin Town sits the lowest among the peer group. Below: how Franklin Town's average outdoor noise and share of residents above the EPA threshold compare with Milford, North Attleboro, Norwood, and Natick.

Average noise level (dBA)

Franklin Town's 53.2 dBA pop-weighted average is the lowest among the peer group. Massachusetts as a whole averages 54.3 dBA and the U.S. averages 52.0 dBA. Both are lower than Franklin Town because most of either area is rural land away from major roads.

Share of residents above 55 dBA

About 26.3% of Franklin Town residents live in blocks where outdoor levels exceed the EPA's 55 dBA threshold. That's fewer than any of its peer group. Measured by land area instead, 35.3% of Franklin Town's footprint sits above 55 dBA, against a Massachusetts average of 40.0% and a national average of 28.1%.

What This Means if You're Moving to Franklin Town

  • Distance from highways matters more than the neighborhood name. Two homes in the same zip code can differ by 20 dBA if one sits 100 meters from I-495 and the other 500 meters away. The model captures this at 100-meter resolution, so noise exposure changes block by block.
  • Tree canopy can help reduce modeled noise exposure. Roughly 58% of Franklin Town is under tree cover (heavier than most cities), and the dominant land cover is low-density developed open space. Both are measured from federal USDA Forest Service and USGS satellite imagery at 30-meter resolution. Streets with 60% or higher canopy show 3 to 5 dBA lower noise than comparable streets with bare ground or pavement, which is why the per-place decay rate above already accounts for it.
  • Airport noise is directional. General Edward Lawrence Logan International's approach paths concentrate aviation noise to the northeast. Neighborhoods to the southwest of downtown show no measurable contribution from the airport.

Sources & Methodology

The BestNeighborhood noise model is calibrated against nearly one million federal ground-truth measurements across four states. Road noise is computed from segment-level federal traffic data and propagated outward using physics-based acoustic decay, with attenuation rates that depend on the surrounding land cover.

Federal datasets used:

FHWA Highway Performance Monitoring System: road geometry, traffic counts, lane configuration
U.S. DoT Bureau of Transportation Statistics National Transportation Noise Map: aviation and rail noise, road calibration ground truth
USGS / MRLC National Land Cover Database: land cover and impervious surface coverage
USDA Forest Service Tree Canopy Cover: vegetation density for sound propagation
U.S. Census Bureau TIGER/Line: block-level geography and population
U.S. EPA Levels Document: 55 dBA outdoor reference level

All inputs are published federal datasets. Block-level noise is computed by combining road, rail, and aviation sound sources in the energy domain, the same physics used in professional environmental noise assessments. Read the full methodology.