Noise Levels in South Walpole, MA | Find Quiet Neighborhoods With Our Sound Map

52 dBA
Average noise across South Walpole
Quiet office to normal conversation
325
Residents above the EPA 55 dBA threshold
16% of South Walpole residents
80 dBA
Loudest residential point
City bus interior

This map shows modeled outdoor noise across South Walpole at 100-meter resolution, combining road, aviation, and rail sources. Green areas measure below 45 dBA. Orange and red exceed the EPA's 55 dBA outdoor threshold linked to long-term health effects. Use the layer toggles to view each source on its own or all together.

Overall
Road
Rail
Aviation
South Walpole, MA Map of Noise Levels in South Walpole
Click the map to explore
35 45 55 70 90
Quietest (dBA) Loudest
Colorblind friendly off

What the numbers sound like

  • 30 dBAWhisper
  • 40 dBASoft rainfall
  • 45 dBAQuiet suburban street at night
  • 50 dBAQuiet office
  • 55 dBAEPA outdoor threshold: light traffic 100 ft away
  • 60 dBANormal conversation an arm's length away
  • 65 dBABusy restaurant
  • 70 dBAHighway traffic 50 ft away
  • 80 dBACity bus interior

Population Above the EPA Outdoor Threshold

The EPA's 55 dBA outdoor reference level is a common benchmark for residential noise exposure, especially for activity interference, annoyance, and long-term community noise concerns. About 325 South Walpole residents, or 16.0%, live above that level. By land area, 30.4% of South Walpole is above 55 dBA.

See how noise in South Walpole compares to similar-sized cities.

Noise by Part of South Walpole

Average noise levels for South Walpole residents, grouped by direction from the center of South Walpole. Eastern South Walpole carries the highest population-weighted average; Southern South Walpole carries the lowest. Just 5% of residents in Southern South Walpole live in blocks above the EPA's 55 dBA threshold, a fifth of the share in Eastern South Walpole.

Central South Walpole

51.9 dBA · Moderate
Quiet office to normal conversation

17% of people above 55 dBA

QuietLoud

Eastern South Walpole

55.2 dBA · Moderate-loud
Quiet office to normal conversation

38% of people above 55 dBA

QuietLoud

Northern South Walpole

54.8 dBA · Moderate-loud
Quiet office to normal conversation

8% of people above 55 dBA

QuietLoud

Southern South Walpole

47.4 dBA · Mostly quiet
Quiet office

5% of people above 55 dBA

QuietLoud

Western South Walpole

51.0 dBA · Moderate
Quiet office

11% of people above 55 dBA

QuietLoud

Eastern South Walpole sounds about 72% louder than Southern South Walpole to the human ear, a 7.8 dBA gap. Every 10 dBA roughly doubles perceived loudness. Within any of these directions, two homes a quarter mile apart can still differ by 10 or more dBA depending on how close they sit to a major highway.

How far back from do you need to be?

produces an estimated 80 dBA at its loudest centerline points. Noise drops logarithmically with distance, with the exact rate depending on what's between you and the road. Tree cover, walls, terrain, and pavement type all matter. At roughly a quarter mile back, traffic fades into the noise level of a quiet suburban street at night.

At source
80 dBA
City bus interior
165 ft
67 dBA
Highway traffic 50 ft away
330 ft
60 dBA
Normal conversation an arm’s length away
660 ft
53 dBA
Quiet office to normal conversation
¼ mile
46 dBA
Quiet suburban street at night
½ mile
39 dBA
Soft rainfall

Calculated from the model's calibrated attenuation formula. About 48% of South Walpole sits under tree canopy (heavier than most cities) and roughly 15% is impervious surface like pavement and rooftops. Both are folded into the per-place decay rate above. Heavier canopy pulls noise down faster with distance; impervious surfaces slow the drop.

-->

Rail Noise

Active freight rail runs through parts of South Walpole. For most blocks the rail-only contribution is small. Combined road-plus-rail noise rarely exceeds road noise on its own. The exceptions are the handful of blocks within roughly a quarter mile of the right-of-way during pass-through hours.

Use the Rail toggle on the map above to isolate rail's contribution from road and aviation.

Airport Noise

General Edward Lawrence Logan International (BOS) sits northeast of South Walpole. The U.S. Department of Transportation measures aviation noise around this airport directly, and the model uses those federal measurements rather than synthetic predictions.

Blocks under the approach and departure paths carry combined road-plus-aviation noise, with some exceeding 75 dBA on the map's Overall layer. Blocks on the opposite side of South Walpole, particularly to the southwest, show no measurable aviation contribution. Use the Aviation toggle on the map above to isolate the airport's footprint.

How Noise Is Distributed Across South Walpole

The bar chart below shows the share of South Walpole residents in each noise band. About 83% of residents live below the EPA's 55 dBA threshold, and roughly 3% live in blocks above 60 dBA. Long-term exposure in that range is linked to elevated stress hormones and cardiovascular risk.

How South Walpole Compares

South Walpole sits at the quieter end of the spectrum. Below: how South Walpole's average outdoor noise and share of residents above the EPA threshold compare with Attleboro Falls, Newton Lower Falls, North Middleboro, and Newton Upper Falls.

Average noise level (dBA)

South Walpole's 51.8 dBA pop-weighted average is at the quieter end of the spectrum. Massachusetts as a whole averages 54.3 dBA and the U.S. averages 52.0 dBA. Both are lower than South Walpole because most of either area is rural land away from major roads.

Share of residents above 55 dBA

About 16.0% of South Walpole residents live in blocks where outdoor levels exceed the EPA's 55 dBA threshold. That's in the middle of its peer group. Measured by land area instead, 30.4% of South Walpole's footprint sits above 55 dBA, against a Massachusetts average of 40.0% and a national average of 28.1%.

What This Means if You're Moving to South Walpole

  • Distance from highways matters more than the neighborhood name. Two homes in the same zip code can differ by 20 dBA if one sits 100 meters from and the other 500 meters away. The model captures this at 100-meter resolution, so noise exposure changes block by block.
  • Tree canopy can help reduce modeled noise exposure. Roughly 48% of South Walpole is under tree cover (heavier than most cities), and the dominant land cover is low-intensity developed land. Both are measured from federal USDA Forest Service and USGS satellite imagery at 30-meter resolution. Streets with 60% or higher canopy show 3 to 5 dBA lower noise than comparable streets with bare ground or pavement, which is why the per-place decay rate above already accounts for it.
  • Airport noise is directional. General Edward Lawrence Logan International's approach paths concentrate aviation noise to the northeast. Neighborhoods to the southwest of downtown show no measurable contribution from the airport.

Sources & Methodology

The BestNeighborhood noise model is calibrated against nearly one million federal ground-truth measurements across four states. Road noise is computed from segment-level federal traffic data and propagated outward using physics-based acoustic decay, with attenuation rates that depend on the surrounding land cover.

Federal datasets used:

FHWA Highway Performance Monitoring System: road geometry, traffic counts, lane configuration
U.S. DoT Bureau of Transportation Statistics National Transportation Noise Map: aviation and rail noise, road calibration ground truth
USGS / MRLC National Land Cover Database: land cover and impervious surface coverage
USDA Forest Service Tree Canopy Cover: vegetation density for sound propagation
U.S. Census Bureau TIGER/Line: block-level geography and population
U.S. EPA Levels Document: 55 dBA outdoor reference level

All inputs are published federal datasets. Block-level noise is computed by combining road, rail, and aviation sound sources in the energy domain, the same physics used in professional environmental noise assessments. Read the full methodology.