Noise Levels in Highland Park, VA | Find Quiet Neighborhoods With Our Sound Map
40 dBA
Average noise across Highland Park
Soft rainfall
2
Residents above the EPA 55 dBA threshold
3% of Highland Park residents
68 dBA
Loudest residential point
Highway traffic 50 ft away
This map shows modeled outdoor noise across Highland Park at 100-meter resolution, combining road, aviation, and rail sources. Green areas measure below 45 dBA. Orange and red exceed the EPA's 55 dBA outdoor threshold linked to long-term health effects. Use the layer toggles to view each source on its own or all together.
Overall
Road
Rail
Aviation
Click the map to explore
35 dBa55 dBa (EPA limit)90+ dBa
3545557090
Quietest (dBA)Loudest
Colorblind friendlyoff
What the numbers sound like
30 dBAWhisper
40 dBASoft rainfall
45 dBAQuiet suburban street at night
50 dBAQuiet office
55 dBAEPA outdoor threshold: light traffic 100 ft away
60 dBANormal conversation an arm's length away
65 dBABusy restaurant
70 dBAHighway traffic 50 ft away
80 dBACity bus interior
Population Above the EPA Outdoor Threshold
The EPA's 55 dBA outdoor reference level is a common benchmark for residential noise exposure, especially for activity interference, annoyance, and long-term community noise concerns. About 2 Highland Park residents, or 3.3%, live above that level. By land area, 3.8% of Highland Park is above 55 dBA.
Average noise levels for Highland Park residents, grouped by direction from the center of Highland Park. Western Highland Park carries the highest population-weighted average; Eastern Highland Park carries the lowest. Just 0% of residents in Eastern Highland Park live in blocks above the EPA's 55 dBA threshold, a fifth of the share in Western Highland Park.
Eastern Highland Park
19.2 dBA · Quiet
Whisper
0% of people above 55 dBA
QuietLoud
Northern Highland Park
43.4 dBA · Quiet
Quiet suburban street at night
2% of people above 55 dBA
QuietLoud
Southern Highland Park
37.7 dBA · Quiet
Soft rainfall
1% of people above 55 dBA
QuietLoud
Western Highland Park
53.9 dBA · Moderate-loud
Quiet office to normal conversation
19% of people above 55 dBA
QuietLoud
Western Highland Park sounds about 1008% louder than Eastern Highland Park to the human ear, a 34.7 dBA gap. Every 10 dBA roughly doubles perceived loudness. Within any of these directions, two homes a quarter mile apart can still differ by 10 or more dBA depending on how close they sit to a major highway.
How far back from do you need to be?
produces an estimated 68 dBA at its loudest centerline points. Noise drops logarithmically with distance, with the exact rate depending on what's between you and the road. Tree cover, walls, terrain, and pavement type all matter. At roughly a quarter mile back, traffic fades into the noise level of a soft rainfall.
At source
68 dBA
Highway traffic 50 ft away
165 ft
54 dBA
Quiet office to normal conversation
330 ft
46 dBA
Quiet office
660 ft
38 dBA
Soft rainfall
¼ mile
35 dBA
Soft rainfall
½ mile
35 dBA
Soft rainfall
Calculated from the model's calibrated attenuation formula. About 34% of Highland Park sits under tree canopy (about average for cities) and roughly 0% is impervious surface like pavement and rooftops. Both are folded into the per-place decay rate above. Heavier canopy pulls noise down faster with distance; impervious surfaces slow the drop.
-->
Airport Noise
Richmond International (RIC) sits north of Highland Park. The U.S. Department of Transportation models aviation noise around this airport from federal traffic data, and the model uses those federal measurements rather than synthetic predictions.
Blocks under the approach and departure paths carry combined road-plus-aviation noise, with some exceeding 65 dBA on the map's Overall layer. Blocks on the opposite side of Highland Park, particularly to the south, show no measurable aviation contribution. Use the Aviation toggle on the map above to isolate the airport's footprint.
How Noise Is Distributed Across Highland Park
The bar chart below shows the share of Highland Park residents in each noise band. About 100% of residents live below the EPA's 55 dBA threshold, and roughly 0% live in blocks above 60 dBA. Long-term exposure in that range is linked to elevated stress hormones and cardiovascular risk.
How Highland Park Compares
Highland Park sits at the louder end of the spectrum. Below: how Highland Park's average outdoor noise and share of residents above the EPA threshold compare with Roxbury, Upper Brandon, Kimages, and Westover.
Average noise level (dBA)
Highland Park's 40.3 dBA pop-weighted average is at the louder end of the spectrum. Virginia as a whole averages 52.8 dBA and the U.S. averages 52.0 dBA. Both are lower than Highland Park because most of either area is rural land away from major roads.
Share of residents above 55 dBA
About 3.3% of Highland Park residents live in blocks where outdoor levels exceed the EPA's 55 dBA threshold. That's more than any of its peer group. Measured by land area instead, 3.8% of Highland Park's footprint sits above 55 dBA, against a Virginia average of 30.0% and a national average of 28.1%.
What This Means if You're Moving to Highland Park
Distance from highways matters more than the neighborhood name. Two homes in the same zip code can differ by 20 dBA if one sits 100 meters from and the other 500 meters away. The model captures this at 100-meter resolution, so noise exposure changes block by block.
Tree canopy can help reduce modeled noise exposure. Roughly 34% of Highland Park is under tree cover (about average for cities), and the dominant land cover is cultivated cropland. Both are measured from federal USDA Forest Service and USGS satellite imagery at 30-meter resolution. Streets with 60% or higher canopy show 3 to 5 dBA lower noise than comparable streets with bare ground or pavement, which is why the per-place decay rate above already accounts for it.
Airport noise is directional. Richmond International's approach paths concentrate aviation noise to the north. Neighborhoods to the south of downtown show no measurable contribution from the airport.
Sources & Methodology
The BestNeighborhood noise model is calibrated against nearly one million federal ground-truth measurements across four states. Road noise is computed from segment-level federal traffic data and propagated outward using physics-based acoustic decay, with attenuation rates that depend on the surrounding land cover.
All inputs are published federal datasets. Block-level noise is computed by combining road, rail, and aviation sound sources in the energy domain, the same physics used in professional environmental noise assessments. Read the full methodology.
