Noise Levels in Santiam, Albany, OR | Find Quiet Neighborhoods With Our Sound Map

58 dBA
Average noise across Santiam
Normal conversation an arm’s length away
1,319
Residents above the EPA 55 dBA threshold
49% of Santiam residents
77 dBA
Loudest residential point
City bus interior

This map shows modeled outdoor noise across Santiam at 100-meter resolution, combining road, aviation, and rail sources. Green areas measure below 45 dBA. Orange and red exceed the EPA's 55 dBA outdoor threshold linked to long-term health effects. Use the layer toggles to view each source on its own or all together.

Overall
Road
Rail
Aviation
Santiam, Albany, OR Map of Noise Levels in Santiam
Click the map to explore
35 45 55 70 90
Quietest (dBA) Loudest
Colorblind friendly off

What the numbers sound like

  • 30 dBAWhisper
  • 40 dBASoft rainfall
  • 45 dBAQuiet suburban street at night
  • 50 dBAQuiet office
  • 55 dBAEPA outdoor threshold: light traffic 100 ft away
  • 60 dBANormal conversation an arm's length away
  • 65 dBABusy restaurant
  • 70 dBAHighway traffic 50 ft away
  • 80 dBACity bus interior

Population Above the EPA Outdoor Threshold

The EPA's 55 dBA outdoor reference level is a common benchmark for residential noise exposure, especially for activity interference, annoyance, and long-term community noise concerns. About 1,319 Santiam residents, or 49.4%, live above that level. By land area, 57.6% of Santiam is above 55 dBA.

See how noise in Santiam compares to similar-sized neighborhoods.

Noise by Part of Santiam

Average noise levels for Santiam residents, grouped by direction from the center of Santiam. Southern Santiam carries the highest population-weighted average; Central Santiam carries the lowest. Just 30% of residents in Central Santiam live in blocks above the EPA's 55 dBA threshold, about half the share in Southern Santiam.

Central Santiam

54.7 dBA · Moderate-loud
Quiet office to normal conversation

30% of people above 55 dBA

QuietLoud

Eastern Santiam

58.3 dBA · Loud
Normal conversation an arm’s length away

60% of people above 55 dBA

QuietLoud

Northern Santiam

60.0 dBA · Loud
Normal conversation an arm’s length away

36% of people above 55 dBA

QuietLoud

Southern Santiam

63.4 dBA · Loud
Busy restaurant

82% of people above 55 dBA

QuietLoud

Western Santiam

56.3 dBA · Moderate-loud
Normal conversation an arm’s length away

53% of people above 55 dBA

QuietLoud

Southern Santiam sounds about 83% louder than Central Santiam to the human ear, a 8.7 dBA gap. Every 10 dBA roughly doubles perceived loudness. Within any of these directions, two homes a quarter mile apart can still differ by 10 or more dBA depending on how close they sit to a major highway.

Loudest Road Corridors

The model evaluates every road in Santiam using federal traffic counts, posted speeds, heavy-truck ratios, and pavement type. The source level shown is the modeled noise at the road centerline, where it is loudest. Noise drops with distance, faster in vegetated areas and slower over open pavement.

RoadTypeAvg. source dBAPeak source dBA
Interstate Route 5 Interstate 73.0 75
I-5 Local 58.3 69
US Route 20 Principal arterial 65.1 69
Pacific Hwy Local 57.4 67

How far back from Interstate Route 5 do you need to be?

Interstate Route 5 produces an estimated 75 dBA at its loudest centerline points. Noise drops logarithmically with distance, with the exact rate depending on what's between you and the road. Tree cover, walls, terrain, and pavement type all matter. At roughly a quarter mile back, traffic fades into the noise level of a soft rainfall.

At source
75 dBA
City bus interior
165 ft
61 dBA
Busy restaurant
330 ft
53 dBA
Quiet office to normal conversation
660 ft
45 dBA
Quiet suburban street at night
¼ mile
38 dBA
Soft rainfall
½ mile
35 dBA
Soft rainfall

Calculated from the model's calibrated attenuation formula. About 10% of Santiam sits under tree canopy (lighter than most neighborhoods) and roughly 62% is impervious surface like pavement and rooftops. Both are folded into the per-place decay rate above. Heavier canopy pulls noise down faster with distance; impervious surfaces slow the drop.

How Noise Is Distributed Across Santiam

The bar chart below shows the share of Santiam residents in each noise band. About 28% of residents live below the EPA's 55 dBA threshold, and roughly 32% live in blocks above 60 dBA. Long-term exposure in that range is linked to elevated stress hormones and cardiovascular risk.

How Santiam Compares

Santiam sits at the louder end of the spectrum. Below: how Santiam's average outdoor noise and share of residents above the EPA threshold compare with sunrise-albany-or, Willamette, jackson-hill-albany-or, and central-albany-albany-or.

Average noise level (dBA)

Santiam's 58.2 dBA pop-weighted average is at the louder end of the spectrum. Oregon as a whole averages 52.9 dBA and the U.S. averages 52.0 dBA. Both are lower than Santiam because most of either area is rural land away from major roads.

Share of residents above 55 dBA

About 49.4% of Santiam residents live in blocks where outdoor levels exceed the EPA's 55 dBA threshold. That's in the middle of its peer group. Measured by land area instead, 57.6% of Santiam's footprint sits above 55 dBA, against a Oregon average of 24.2% and a national average of 28.1%.

What This Means if You're Moving to Santiam

  • Distance from highways matters more than the neighborhood name. Two homes in the same zip code can differ by 20 dBA if one sits 100 meters from Interstate Route 5 and the other 500 meters away. The model captures this at 100-meter resolution, so noise exposure changes block by block.
  • Tree canopy can help reduce modeled noise exposure. Roughly 10% of Santiam is under tree cover (lighter than most neighborhoods), and the dominant land cover is medium-intensity developed land. Both are measured from federal USDA Forest Service and USGS satellite imagery at 30-meter resolution. Streets with 60% or higher canopy show 3 to 5 dBA lower noise than comparable streets with bare ground or pavement, which is why the per-place decay rate above already accounts for it.

Sources & Methodology

The BestNeighborhood noise model is calibrated against nearly one million federal ground-truth measurements across four states. Road noise is computed from segment-level federal traffic data and propagated outward using physics-based acoustic decay, with attenuation rates that depend on the surrounding land cover.

Federal datasets used:

FHWA Highway Performance Monitoring System: road geometry, traffic counts, lane configuration
U.S. DoT Bureau of Transportation Statistics National Transportation Noise Map: aviation and rail noise, road calibration ground truth
USGS / MRLC National Land Cover Database: land cover and impervious surface coverage
USDA Forest Service Tree Canopy Cover: vegetation density for sound propagation
U.S. Census Bureau TIGER/Line: block-level geography and population
U.S. EPA Levels Document: 55 dBA outdoor reference level

All inputs are published federal datasets. Block-level noise is computed by combining road, rail, and aviation sound sources in the energy domain, the same physics used in professional environmental noise assessments. Read the full methodology.