Noise Levels in 34748, FL | Find Quiet Neighborhoods With Our Sound Map

50 dBA
Average noise across 34748
Quiet office
8,550
Residents above the EPA 55 dBA threshold
22% of 34748 residents
79 dBA
Loudest residential point
City bus interior

This map shows modeled outdoor noise across 34748 at 100-meter resolution, combining road, aviation, and rail sources. Green areas measure below 45 dBA. Orange and red exceed the EPA's 55 dBA outdoor threshold linked to long-term health effects. Use the layer toggles to view each source on its own or all together.

Overall
Road
Rail
Aviation
34748, FL Map of Noise Levels in 34748
Click the map to explore
35 45 55 70 90
Quietest (dBA) Loudest
Colorblind friendly off

What the numbers sound like

  • 30 dBAWhisper
  • 40 dBASoft rainfall
  • 45 dBAQuiet suburban street at night
  • 50 dBAQuiet office
  • 55 dBAEPA outdoor threshold: light traffic 100 ft away
  • 60 dBANormal conversation an arm's length away
  • 65 dBABusy restaurant
  • 70 dBAHighway traffic 50 ft away
  • 80 dBACity bus interior

Population Above the EPA Outdoor Threshold

The EPA's 55 dBA outdoor reference level is a common benchmark for residential noise exposure, especially for activity interference, annoyance, and long-term community noise concerns. About 8,550 34748 residents, or 21.6%, live above that level. By land area, 29.9% of 34748 is above 55 dBA.

See how noise in 34748 compares to similar-sized zip codes.

Noise by Part of 34748

Average noise levels for 34748 residents, grouped by direction from the center of 34748. Northern 34748 carries the highest population-weighted average; Western 34748 carries the lowest. Just 15% of residents in Western 34748 live in blocks above the EPA's 55 dBA threshold, about two-thirds of the share in Northern 34748.

Eastern 34748

49.9 dBA · Mostly quiet
Quiet office

18% of people above 55 dBA

QuietLoud

Northern 34748

51.8 dBA · Moderate
Quiet office to normal conversation

28% of people above 55 dBA

QuietLoud

Southern 34748

49.2 dBA · Mostly quiet
Quiet office

17% of people above 55 dBA

QuietLoud

Western 34748

47.0 dBA · Mostly quiet
Quiet office

15% of people above 55 dBA

QuietLoud

Northern 34748 sounds about 39% louder than Western 34748 to the human ear, a 4.8 dBA gap. Every 10 dBA roughly doubles perceived loudness. Within any of these directions, two homes a quarter mile apart can still differ by 10 or more dBA depending on how close they sit to a major highway.

Loudest Road Corridors

The model evaluates every road in 34748 using federal traffic counts, posted speeds, heavy-truck ratios, and pavement type. The source level shown is the modeled noise at the road centerline, where it is loudest. Noise drops with distance, faster in vegetated areas and slower over open pavement.

RoadTypeAvg. source dBAPeak source dBA
Tpk Mainline Sr-91 Freeway 74.7 75
State Rd 91 Local 57.0 69
US-27 Principal arterial 66.2 68
US-441 Principal arterial 67.5 68
14 Th St Principal arterial 66.5 68

How far back from Tpk Mainline Sr-91 do you need to be?

Tpk Mainline Sr-91 produces an estimated 75 dBA at its loudest centerline points. Noise drops logarithmically with distance, with the exact rate depending on what's between you and the road. Tree cover, walls, terrain, and pavement type all matter. At roughly a quarter mile back, traffic fades into the noise level of a soft rainfall.

At source
75 dBA
City bus interior
165 ft
61 dBA
Busy restaurant
330 ft
54 dBA
Quiet office to normal conversation
660 ft
46 dBA
Quiet suburban street at night
¼ mile
38 dBA
Soft rainfall
½ mile
35 dBA
Soft rainfall

Calculated from the model's calibrated attenuation formula. About 22% of 34748 sits under tree canopy (about average for zip codes) and roughly 34% is impervious surface like pavement and rooftops. Both are folded into the per-place decay rate above. Heavier canopy pulls noise down faster with distance; impervious surfaces slow the drop.

How Noise Is Distributed Across 34748

The bar chart below shows the share of 34748 residents in each noise band. About 79% of residents live below the EPA's 55 dBA threshold, and roughly 3% live in blocks above 60 dBA. Long-term exposure in that range is linked to elevated stress hormones and cardiovascular risk.

How 34748 Compares

34748 sits at the quieter end of the spectrum. Below: how 34748's average outdoor noise and share of residents above the EPA threshold compare with 32162, 34785, 32159, and 32712.

Average noise level (dBA)

34748's 50.2 dBA pop-weighted average is at the quieter end of the spectrum. Florida as a whole averages 51.6 dBA and the U.S. averages 52.0 dBA. Both are lower than 34748 because most of either area is rural land away from major roads.

Share of residents above 55 dBA

About 21.6% of 34748 residents live in blocks where outdoor levels exceed the EPA's 55 dBA threshold. That's more than any of its peer group. Measured by land area instead, 29.9% of 34748's footprint sits above 55 dBA, against a Florida average of 31.8% and a national average of 28.1%.

What This Means if You're Moving to 34748

  • Distance from highways matters more than the neighborhood name. Two homes in the same zip code can differ by 20 dBA if one sits 100 meters from Tpk Mainline Sr-91 and the other 500 meters away. The model captures this at 100-meter resolution, so noise exposure changes block by block.
  • Tree canopy can help reduce modeled noise exposure. Roughly 22% of 34748 is under tree cover (about average for zip codes), and the dominant land cover is low-intensity developed land. Both are measured from federal USDA Forest Service and USGS satellite imagery at 30-meter resolution. Streets with 60% or higher canopy show 3 to 5 dBA lower noise than comparable streets with bare ground or pavement, which is why the per-place decay rate above already accounts for it.

Sources & Methodology

The BestNeighborhood noise model is calibrated against nearly one million federal ground-truth measurements across four states. Road noise is computed from segment-level federal traffic data and propagated outward using physics-based acoustic decay, with attenuation rates that depend on the surrounding land cover.

Federal datasets used:

FHWA Highway Performance Monitoring System: road geometry, traffic counts, lane configuration
U.S. DoT Bureau of Transportation Statistics National Transportation Noise Map: aviation and rail noise, road calibration ground truth
USGS / MRLC National Land Cover Database: land cover and impervious surface coverage
USDA Forest Service Tree Canopy Cover: vegetation density for sound propagation
U.S. Census Bureau TIGER/Line: block-level geography and population
U.S. EPA Levels Document: 55 dBA outdoor reference level

All inputs are published federal datasets. Block-level noise is computed by combining road, rail, and aviation sound sources in the energy domain, the same physics used in professional environmental noise assessments. Read the full methodology.