Noise Levels in 44689, OH | Find Quiet Neighborhoods With Our Sound Map

45 dBA
Average noise across 44689
Quiet suburban street at night
96
Residents above the EPA 55 dBA threshold
21% of 44689 residents
62 dBA
Loudest residential point
Busy restaurant

This map shows modeled outdoor noise across 44689 at 100-meter resolution, combining road, aviation, and rail sources. Green areas measure below 45 dBA. Orange and red exceed the EPA's 55 dBA outdoor threshold linked to long-term health effects. Use the layer toggles to view each source on its own or all together.

Overall
Road
Rail
Aviation
44689, OH Map of Noise Levels in 44689
Click the map to explore
35 45 55 70 90
Quietest (dBA) Loudest
Colorblind friendly off

What the numbers sound like

  • 30 dBAWhisper
  • 40 dBASoft rainfall
  • 45 dBAQuiet suburban street at night
  • 50 dBAQuiet office
  • 55 dBAEPA outdoor threshold: light traffic 100 ft away
  • 60 dBANormal conversation an arm's length away
  • 65 dBABusy restaurant
  • 70 dBAHighway traffic 50 ft away
  • 80 dBACity bus interior

Population Above the EPA Outdoor Threshold

The EPA's 55 dBA outdoor reference level is a common benchmark for residential noise exposure, especially for activity interference, annoyance, and long-term community noise concerns. About 96 44689 residents, or 21.1%, live above that level. By land area, 34.3% of 44689 is above 55 dBA.

See how noise in 44689 compares to similar-sized zip codes.

Noise by Part of 44689

Average noise levels for 44689 residents, grouped by direction from the center of 44689. Eastern 44689 carries the highest population-weighted average; Western 44689 carries the lowest. Just 1% of residents in Western 44689 live in blocks above the EPA's 55 dBA threshold, a fifth of the share in Eastern 44689.

Eastern 44689

51.1 dBA · Moderate
Quiet office to normal conversation

50% of people above 55 dBA

QuietLoud

Northern 44689

41.6 dBA · Quiet
Quiet suburban street at night

0% of people above 55 dBA

QuietLoud

Southern 44689

46.7 dBA · Mostly quiet
Quiet office

0% of people above 55 dBA

QuietLoud

Western 44689

39.5 dBA · Quiet
Soft rainfall

1% of people above 55 dBA

QuietLoud

Eastern 44689 sounds about 123% louder than Western 44689 to the human ear, a 11.6 dBA gap. Every 10 dBA roughly doubles perceived loudness. Within any of these directions, two homes a quarter mile apart can still differ by 10 or more dBA depending on how close they sit to a major highway.

How far back from Tr 660 do you need to be?

Tr 660 produces an estimated 55 dBA at its loudest centerline points. Noise drops logarithmically with distance, with the exact rate depending on what's between you and the road. Tree cover, walls, terrain, and pavement type all matter. At roughly a quarter mile back, traffic fades into the noise level of a soft rainfall.

At source
55 dBA
Quiet office to normal conversation
165 ft
43 dBA
Quiet suburban street at night
330 ft
36 dBA
Soft rainfall
660 ft
35 dBA
Soft rainfall
¼ mile
35 dBA
Soft rainfall
½ mile
35 dBA
Soft rainfall

Calculated from the model's calibrated attenuation formula. About 16% of 44689 sits under tree canopy (about average for zip codes) and roughly 19% is impervious surface like pavement and rooftops. Both are folded into the per-place decay rate above. Heavier canopy pulls noise down faster with distance; impervious surfaces slow the drop.

-->

How Noise Is Distributed Across 44689

The bar chart below shows the share of 44689 residents in each noise band. About 80% of residents live below the EPA's 55 dBA threshold, and roughly 2% live in blocks above 60 dBA. Long-term exposure in that range is linked to elevated stress hormones and cardiovascular risk.

How 44689 Compares

44689 sits the lowest among the peer group. Below: how 44689's average outdoor noise and share of residents above the EPA threshold compare with 44653, 44659, 44682, and 44702.

Average noise level (dBA)

44689's 45.3 dBA pop-weighted average is the lowest among the peer group. Ohio as a whole averages 51.1 dBA and the U.S. averages 52.0 dBA. Both are lower than 44689 because most of either area is rural land away from major roads.

Share of residents above 55 dBA

About 21.1% of 44689 residents live in blocks where outdoor levels exceed the EPA's 55 dBA threshold. That's in the middle of its peer group. Measured by land area instead, 34.3% of 44689's footprint sits above 55 dBA, against a Ohio average of 26.4% and a national average of 28.1%.

What This Means if You're Moving to 44689

  • Distance from highways matters more than the neighborhood name. Two homes in the same zip code can differ by 20 dBA if one sits 100 meters from Tr 660 and the other 500 meters away. The model captures this at 100-meter resolution, so noise exposure changes block by block.
  • Tree canopy can help reduce modeled noise exposure. Roughly 16% of 44689 is under tree cover (about average for zip codes), and the dominant land cover is pasture / hay. Both are measured from federal USDA Forest Service and USGS satellite imagery at 30-meter resolution. Streets with 60% or higher canopy show 3 to 5 dBA lower noise than comparable streets with bare ground or pavement, which is why the per-place decay rate above already accounts for it.

Sources & Methodology

The BestNeighborhood noise model is calibrated against nearly one million federal ground-truth measurements across four states. Road noise is computed from segment-level federal traffic data and propagated outward using physics-based acoustic decay, with attenuation rates that depend on the surrounding land cover.

Federal datasets used:

FHWA Highway Performance Monitoring System: road geometry, traffic counts, lane configuration
U.S. DoT Bureau of Transportation Statistics National Transportation Noise Map: aviation and rail noise, road calibration ground truth
USGS / MRLC National Land Cover Database: land cover and impervious surface coverage
USDA Forest Service Tree Canopy Cover: vegetation density for sound propagation
U.S. Census Bureau TIGER/Line: block-level geography and population
U.S. EPA Levels Document: 55 dBA outdoor reference level

All inputs are published federal datasets. Block-level noise is computed by combining road, rail, and aviation sound sources in the energy domain, the same physics used in professional environmental noise assessments. Read the full methodology.