Noise Levels in 49040, MI | Find Quiet Neighborhoods With Our Sound Map

42 dBA
Average noise across 49040
Quiet suburban street at night
264
Residents above the EPA 55 dBA threshold
9% of 49040 residents
62 dBA
Loudest residential point
Busy restaurant

This map shows modeled outdoor noise across 49040 at 100-meter resolution, combining road, aviation, and rail sources. Green areas measure below 45 dBA. Orange and red exceed the EPA's 55 dBA outdoor threshold linked to long-term health effects. Use the layer toggles to view each source on its own or all together.

Overall
Road
Rail
Aviation
49040, MI Map of Noise Levels in 49040
Click the map to explore
35 45 55 70 90
Quietest (dBA) Loudest
Colorblind friendly off

What the numbers sound like

  • 30 dBAWhisper
  • 40 dBASoft rainfall
  • 45 dBAQuiet suburban street at night
  • 50 dBAQuiet office
  • 55 dBAEPA outdoor threshold: light traffic 100 ft away
  • 60 dBANormal conversation an arm's length away
  • 65 dBABusy restaurant
  • 70 dBAHighway traffic 50 ft away
  • 80 dBACity bus interior

Population Above the EPA Outdoor Threshold

The EPA's 55 dBA outdoor reference level is a common benchmark for residential noise exposure, especially for activity interference, annoyance, and long-term community noise concerns. About 264 49040 residents, or 9.3%, live above that level. By land area, 12.3% of 49040 is above 55 dBA.

See how noise in 49040 compares to similar-sized zip codes.

Noise by Part of 49040

Average noise levels for 49040 residents, grouped by direction from the center of 49040. Central 49040 carries the highest population-weighted average; Northern 49040 carries the lowest. Just 6% of residents in Northern 49040 live in blocks above the EPA's 55 dBA threshold, a fifth of the share in Central 49040.

Central 49040

53.7 dBA · Moderate-loud
Quiet office to normal conversation

43% of people above 55 dBA

QuietLoud

Eastern 49040

45.5 dBA · Mostly quiet
Quiet suburban street at night

9% of people above 55 dBA

QuietLoud

Northern 49040

37.3 dBA · Quiet
Soft rainfall

6% of people above 55 dBA

QuietLoud

Southern 49040

40.7 dBA · Quiet
Soft rainfall

3% of people above 55 dBA

QuietLoud

Western 49040

38.1 dBA · Quiet
Soft rainfall

2% of people above 55 dBA

QuietLoud

Central 49040 sounds about 212% louder than Northern 49040 to the human ear, a 16.4 dBA gap. Every 10 dBA roughly doubles perceived loudness. Within any of these directions, two homes a quarter mile apart can still differ by 10 or more dBA depending on how close they sit to a major highway.

Loudest Road Corridors

The model evaluates every road in 49040 using federal traffic counts, posted speeds, heavy-truck ratios, and pavement type. The source level shown is the modeled noise at the road centerline, where it is loudest. Noise drops with distance, faster in vegetated areas and slower over open pavement.

RoadTypeAvg. source dBAPeak source dBA
Long Lake Rd Local 53.7 57
State St Minor arterial 55.2 56
Burr Oak Rd Major collector 51.8 53
Blossom Rd Local 53.0 53
Fairfax Rd Local 53.0 53

How far back from Long Lake Rd do you need to be?

Long Lake Rd produces an estimated 57 dBA at its loudest centerline points. Noise drops logarithmically with distance, with the exact rate depending on what's between you and the road. Tree cover, walls, terrain, and pavement type all matter. At roughly a quarter mile back, traffic fades into the noise level of a soft rainfall.

At source
57 dBA
Normal conversation an arm’s length away
165 ft
45 dBA
Quiet suburban street at night
330 ft
37 dBA
Soft rainfall
660 ft
35 dBA
Soft rainfall
¼ mile
35 dBA
Soft rainfall
½ mile
35 dBA
Soft rainfall

Calculated from the model's calibrated attenuation formula. About 22% of 49040 sits under tree canopy (about average for zip codes) and roughly 10% is impervious surface like pavement and rooftops. Both are folded into the per-place decay rate above. Heavier canopy pulls noise down faster with distance; impervious surfaces slow the drop.

How Noise Is Distributed Across 49040

The bar chart below shows the share of 49040 residents in each noise band. About 91% of residents live below the EPA's 55 dBA threshold, and roughly 1% live in blocks above 60 dBA. Long-term exposure in that range is linked to elevated stress hormones and cardiovascular risk.

How 49040 Compares

49040 sits at the quieter end of the spectrum. Below: how 49040's average outdoor noise and share of residents above the EPA threshold compare with 49072, 49032, 49030, and 49094.

Average noise level (dBA)

49040's 42.2 dBA pop-weighted average is at the quieter end of the spectrum. Michigan as a whole averages 49.3 dBA and the U.S. averages 52.0 dBA. Both are lower than 49040 because most of either area is rural land away from major roads.

Share of residents above 55 dBA

About 9.3% of 49040 residents live in blocks where outdoor levels exceed the EPA's 55 dBA threshold. That's more than any of its peer group. Measured by land area instead, 12.3% of 49040's footprint sits above 55 dBA, against a Michigan average of 19.9% and a national average of 28.1%.

What This Means if You're Moving to 49040

  • Distance from highways matters more than the neighborhood name. Two homes in the same zip code can differ by 20 dBA if one sits 100 meters from Long Lake Rd and the other 500 meters away. The model captures this at 100-meter resolution, so noise exposure changes block by block.
  • Tree canopy can help reduce modeled noise exposure. Roughly 22% of 49040 is under tree cover (about average for zip codes), and the dominant land cover is cultivated cropland. Both are measured from federal USDA Forest Service and USGS satellite imagery at 30-meter resolution. Streets with 60% or higher canopy show 3 to 5 dBA lower noise than comparable streets with bare ground or pavement, which is why the per-place decay rate above already accounts for it.

Sources & Methodology

The BestNeighborhood noise model is calibrated against nearly one million federal ground-truth measurements across four states. Road noise is computed from segment-level federal traffic data and propagated outward using physics-based acoustic decay, with attenuation rates that depend on the surrounding land cover.

Federal datasets used:

FHWA Highway Performance Monitoring System: road geometry, traffic counts, lane configuration
U.S. DoT Bureau of Transportation Statistics National Transportation Noise Map: aviation and rail noise, road calibration ground truth
USGS / MRLC National Land Cover Database: land cover and impervious surface coverage
USDA Forest Service Tree Canopy Cover: vegetation density for sound propagation
U.S. Census Bureau TIGER/Line: block-level geography and population
U.S. EPA Levels Document: 55 dBA outdoor reference level

All inputs are published federal datasets. Block-level noise is computed by combining road, rail, and aviation sound sources in the energy domain, the same physics used in professional environmental noise assessments. Read the full methodology.