Noise Levels in 73045, OK | Find Quiet Neighborhoods With Our Sound Map

48 dBA
Average noise across 73045
Quiet office
1,224
Residents above the EPA 55 dBA threshold
11% of 73045 residents
83 dBA
Loudest residential point
Food blender at arm’s length

This map shows modeled outdoor noise across 73045 at 100-meter resolution, combining road, aviation, and rail sources. Green areas measure below 45 dBA. Orange and red exceed the EPA's 55 dBA outdoor threshold linked to long-term health effects. Use the layer toggles to view each source on its own or all together.

Overall
Road
Rail
Aviation
73045, OK Map of Noise Levels in 73045
Click the map to explore
35 45 55 70 90
Quietest (dBA) Loudest
Colorblind friendly off

What the numbers sound like

  • 30 dBAWhisper
  • 40 dBASoft rainfall
  • 45 dBAQuiet suburban street at night
  • 50 dBAQuiet office
  • 55 dBAEPA outdoor threshold: light traffic 100 ft away
  • 60 dBANormal conversation an arm's length away
  • 65 dBABusy restaurant
  • 70 dBAHighway traffic 50 ft away
  • 80 dBACity bus interior

Population Above the EPA Outdoor Threshold

The EPA's 55 dBA outdoor reference level is a common benchmark for residential noise exposure, especially for activity interference, annoyance, and long-term community noise concerns. About 1,224 73045 residents, or 11.1%, live above that level. By land area, 12.5% of 73045 is above 55 dBA.

See how noise in 73045 compares to similar-sized zip codes.

Noise by Part of 73045

Average noise levels for 73045 residents, grouped by direction from the center of 73045. Western 73045 carries the highest population-weighted average; Eastern 73045 carries the lowest. Just 1% of residents in Eastern 73045 live in blocks above the EPA's 55 dBA threshold, a fifth of the share in Western 73045.

Central 73045

51.8 dBA · Moderate
Quiet office to normal conversation

32% of people above 55 dBA

QuietLoud

Eastern 73045

40.6 dBA · Quiet
Soft rainfall

1% of people above 55 dBA

QuietLoud

Northern 73045

46.9 dBA · Mostly quiet
Quiet office

6% of people above 55 dBA

QuietLoud

Southern 73045

48.8 dBA · Mostly quiet
Quiet office

13% of people above 55 dBA

QuietLoud

Western 73045

52.7 dBA · Moderate
Quiet office to normal conversation

15% of people above 55 dBA

QuietLoud

Western 73045 sounds about 131% louder than Eastern 73045 to the human ear, a 12.1 dBA gap. Every 10 dBA roughly doubles perceived loudness. Within any of these directions, two homes a quarter mile apart can still differ by 10 or more dBA depending on how close they sit to a major highway.

Loudest Road Corridors

The model evaluates every road in 73045 using federal traffic counts, posted speeds, heavy-truck ratios, and pavement type. The source level shown is the modeled noise at the road centerline, where it is loudest. Noise drops with distance, faster in vegetated areas and slower over open pavement.

RoadTypeAvg. source dBAPeak source dBA
I-335 Interstate 73.4 75
North Luther Rd Major collector 52.2 73
North Harrah Rd Major collector 51.7 63
S270 Major collector 58.5 63
U062 Principal arterial 57.8 62

How far back from I-335 do you need to be?

I-335 produces an estimated 75 dBA at its loudest centerline points. Noise drops logarithmically with distance, with the exact rate depending on what's between you and the road. Tree cover, walls, terrain, and pavement type all matter. At roughly a quarter mile back, traffic fades into the noise level of a quiet suburban street at night.

At source
75 dBA
City bus interior
165 ft
63 dBA
Busy restaurant
330 ft
57 dBA
Normal conversation an arm’s length away
660 ft
50 dBA
Quiet office
¼ mile
43 dBA
Quiet suburban street at night
½ mile
37 dBA
Soft rainfall

Calculated from the model's calibrated attenuation formula. About 16% of 73045 sits under tree canopy (lighter than most zip codes) and roughly 7% is impervious surface like pavement and rooftops. Both are folded into the per-place decay rate above. Heavier canopy pulls noise down faster with distance; impervious surfaces slow the drop.

How Noise Is Distributed Across 73045

The bar chart below shows the share of 73045 residents in each noise band. About 91% of residents live below the EPA's 55 dBA threshold, and roughly 6% live in blocks above 60 dBA. Long-term exposure in that range is linked to elevated stress hormones and cardiovascular risk.

How 73045 Compares

73045 sits at the louder end of the spectrum. Below: how 73045's average outdoor noise and share of residents above the EPA threshold compare with 74857, 74851, 73111, and 74873.

Average noise level (dBA)

73045's 48.4 dBA pop-weighted average is at the louder end of the spectrum. Oklahoma as a whole averages 50.5 dBA and the U.S. averages 52.0 dBA. Both are lower than 73045 because most of either area is rural land away from major roads.

Share of residents above 55 dBA

About 11.1% of 73045 residents live in blocks where outdoor levels exceed the EPA's 55 dBA threshold. That's in the middle of its peer group. Measured by land area instead, 12.5% of 73045's footprint sits above 55 dBA, against a Oklahoma average of 22.7% and a national average of 28.1%.

What This Means if You're Moving to 73045

  • Distance from highways matters more than the neighborhood name. Two homes in the same zip code can differ by 20 dBA if one sits 100 meters from I-335 and the other 500 meters away. The model captures this at 100-meter resolution, so noise exposure changes block by block.
  • Tree canopy can help reduce modeled noise exposure. Roughly 16% of 73045 is under tree cover (lighter than most zip codes), and the dominant land cover is deciduous forest. Both are measured from federal USDA Forest Service and USGS satellite imagery at 30-meter resolution. Streets with 60% or higher canopy show 3 to 5 dBA lower noise than comparable streets with bare ground or pavement, which is why the per-place decay rate above already accounts for it.

Sources & Methodology

The BestNeighborhood noise model is calibrated against nearly one million federal ground-truth measurements across four states. Road noise is computed from segment-level federal traffic data and propagated outward using physics-based acoustic decay, with attenuation rates that depend on the surrounding land cover.

Federal datasets used:

FHWA Highway Performance Monitoring System: road geometry, traffic counts, lane configuration
U.S. DoT Bureau of Transportation Statistics National Transportation Noise Map: aviation and rail noise, road calibration ground truth
USGS / MRLC National Land Cover Database: land cover and impervious surface coverage
USDA Forest Service Tree Canopy Cover: vegetation density for sound propagation
U.S. Census Bureau TIGER/Line: block-level geography and population
U.S. EPA Levels Document: 55 dBA outdoor reference level

All inputs are published federal datasets. Block-level noise is computed by combining road, rail, and aviation sound sources in the energy domain, the same physics used in professional environmental noise assessments. Read the full methodology.