Noise Levels in 73020, OK | Find Quiet Neighborhoods With Our Sound Map

49 dBA
Average noise across 73020
Quiet office
2,416
Residents above the EPA 55 dBA threshold
10% of 73020 residents
85 dBA
Loudest residential point
Food blender at arm’s length

This map shows modeled outdoor noise across 73020 at 100-meter resolution, combining road, aviation, and rail sources. Green areas measure below 45 dBA. Orange and red exceed the EPA's 55 dBA outdoor threshold linked to long-term health effects. Use the layer toggles to view each source on its own or all together.

Overall
Road
Rail
Aviation
73020, OK Map of Noise Levels in 73020
Click the map to explore
35 45 55 70 90
Quietest (dBA) Loudest
Colorblind friendly off

What the numbers sound like

  • 30 dBAWhisper
  • 40 dBASoft rainfall
  • 45 dBAQuiet suburban street at night
  • 50 dBAQuiet office
  • 55 dBAEPA outdoor threshold: light traffic 100 ft away
  • 60 dBANormal conversation an arm's length away
  • 65 dBABusy restaurant
  • 70 dBAHighway traffic 50 ft away
  • 80 dBACity bus interior

Population Above the EPA Outdoor Threshold

The EPA's 55 dBA outdoor reference level is a common benchmark for residential noise exposure, especially for activity interference, annoyance, and long-term community noise concerns. About 2,416 73020 residents, or 10.4%, live above that level. By land area, 16.4% of 73020 is above 55 dBA.

See how noise in 73020 compares to similar-sized zip codes.

Noise by Part of 73020

Average noise levels for 73020 residents, grouped by direction from the center of 73020. Southern 73020 carries the highest population-weighted average; Northern 73020 carries the lowest. Just 12% of residents in Northern 73020 live in blocks above the EPA's 55 dBA threshold, roughly the same as the share in Southern 73020.

Central 73020

48.8 dBA · Mostly quiet
Quiet office

7% of people above 55 dBA

QuietLoud

Eastern 73020

48.5 dBA · Mostly quiet
Quiet office

9% of people above 55 dBA

QuietLoud

Northern 73020

48.0 dBA · Mostly quiet
Quiet office

12% of people above 55 dBA

QuietLoud

Southern 73020

49.7 dBA · Mostly quiet
Quiet office

10% of people above 55 dBA

QuietLoud

Western 73020

49.7 dBA · Mostly quiet
Quiet office

11% of people above 55 dBA

QuietLoud

Southern 73020 sounds about 13% louder than Northern 73020 to the human ear, a 1.7 dBA gap. Every 10 dBA roughly doubles perceived loudness. Within any of these directions, two homes a quarter mile apart can still differ by 10 or more dBA depending on how close they sit to a major highway.

Loudest Road Corridors

The model evaluates every road in 73020 using federal traffic counts, posted speeds, heavy-truck ratios, and pavement type. The source level shown is the modeled noise at the road centerline, where it is loudest. Noise drops with distance, faster in vegetated areas and slower over open pavement.

RoadTypeAvg. source dBAPeak source dBA
I-040 Interstate 75.3 76
I-335 Interstate 73.5 75
U062 Principal arterial 61.9 64
Southeast 15TH St Minor arterial 54.9 60
Northeast 10TH St Minor arterial 52.7 58

How far back from I-040 do you need to be?

I-040 produces an estimated 76 dBA at its loudest centerline points. Noise drops logarithmically with distance, with the exact rate depending on what's between you and the road. Tree cover, walls, terrain, and pavement type all matter. At roughly a quarter mile back, traffic fades into the noise level of a quiet suburban street at night.

At source
76 dBA
City bus interior
165 ft
65 dBA
Busy restaurant
330 ft
58 dBA
Normal conversation an arm’s length away
660 ft
51 dBA
Quiet office to normal conversation
¼ mile
45 dBA
Quiet suburban street at night
½ mile
38 dBA
Soft rainfall

Calculated from the model's calibrated attenuation formula. About 18% of 73020 sits under tree canopy (about average for zip codes) and roughly 10% is impervious surface like pavement and rooftops. Both are folded into the per-place decay rate above. Heavier canopy pulls noise down faster with distance; impervious surfaces slow the drop.

How Noise Is Distributed Across 73020

The bar chart below shows the share of 73020 residents in each noise band. About 92% of residents live below the EPA's 55 dBA threshold, and roughly 3% live in blocks above 60 dBA. Long-term exposure in that range is linked to elevated stress hormones and cardiovascular risk.

How 73020 Compares

73020 sits the lowest among the peer group. Below: how 73020's average outdoor noise and share of residents above the EPA threshold compare with 73130, 73110, 73135, and 73115.

Average noise level (dBA)

73020's 48.9 dBA pop-weighted average is the lowest among the peer group. Oklahoma as a whole averages 50.5 dBA and the U.S. averages 52.0 dBA. Both are lower than 73020 because most of either area is rural land away from major roads.

Share of residents above 55 dBA

About 10.4% of 73020 residents live in blocks where outdoor levels exceed the EPA's 55 dBA threshold. That's fewer than any of its peer group. Measured by land area instead, 16.4% of 73020's footprint sits above 55 dBA, against a Oklahoma average of 22.7% and a national average of 28.1%.

What This Means if You're Moving to 73020

  • Distance from highways matters more than the neighborhood name. Two homes in the same zip code can differ by 20 dBA if one sits 100 meters from I-040 and the other 500 meters away. The model captures this at 100-meter resolution, so noise exposure changes block by block.
  • Tree canopy can help reduce modeled noise exposure. Roughly 18% of 73020 is under tree cover (about average for zip codes), and the dominant land cover is deciduous forest. Both are measured from federal USDA Forest Service and USGS satellite imagery at 30-meter resolution. Streets with 60% or higher canopy show 3 to 5 dBA lower noise than comparable streets with bare ground or pavement, which is why the per-place decay rate above already accounts for it.

Sources & Methodology

The BestNeighborhood noise model is calibrated against nearly one million federal ground-truth measurements across four states. Road noise is computed from segment-level federal traffic data and propagated outward using physics-based acoustic decay, with attenuation rates that depend on the surrounding land cover.

Federal datasets used:

FHWA Highway Performance Monitoring System: road geometry, traffic counts, lane configuration
U.S. DoT Bureau of Transportation Statistics National Transportation Noise Map: aviation and rail noise, road calibration ground truth
USGS / MRLC National Land Cover Database: land cover and impervious surface coverage
USDA Forest Service Tree Canopy Cover: vegetation density for sound propagation
U.S. Census Bureau TIGER/Line: block-level geography and population
U.S. EPA Levels Document: 55 dBA outdoor reference level

All inputs are published federal datasets. Block-level noise is computed by combining road, rail, and aviation sound sources in the energy domain, the same physics used in professional environmental noise assessments. Read the full methodology.