Noise Levels in 74851, OK | Find Quiet Neighborhoods With Our Sound Map

45 dBA
Average noise across 74851
Quiet suburban street at night
696
Residents above the EPA 55 dBA threshold
8% of 74851 residents
82 dBA
Loudest residential point
Food blender at arm’s length

This map shows modeled outdoor noise across 74851 at 100-meter resolution, combining road, aviation, and rail sources. Green areas measure below 45 dBA. Orange and red exceed the EPA's 55 dBA outdoor threshold linked to long-term health effects. Use the layer toggles to view each source on its own or all together.

Overall
Road
Rail
Aviation
74851, OK Map of Noise Levels in 74851
Click the map to explore
35 45 55 70 90
Quietest (dBA) Loudest
Colorblind friendly off

What the numbers sound like

  • 30 dBAWhisper
  • 40 dBASoft rainfall
  • 45 dBAQuiet suburban street at night
  • 50 dBAQuiet office
  • 55 dBAEPA outdoor threshold: light traffic 100 ft away
  • 60 dBANormal conversation an arm's length away
  • 65 dBABusy restaurant
  • 70 dBAHighway traffic 50 ft away
  • 80 dBACity bus interior

Population Above the EPA Outdoor Threshold

The EPA's 55 dBA outdoor reference level is a common benchmark for residential noise exposure, especially for activity interference, annoyance, and long-term community noise concerns. About 696 74851 residents, or 7.8%, live above that level. By land area, 13.4% of 74851 is above 55 dBA.

See how noise in 74851 compares to similar-sized zip codes.

Noise by Part of 74851

Average noise levels for 74851 residents, grouped by direction from the center of 74851. Northern 74851 carries the highest population-weighted average; Eastern 74851 carries the lowest. Just 6% of residents in Eastern 74851 live in blocks above the EPA's 55 dBA threshold, three-quarters of the share in Northern 74851.

Eastern 74851

42.9 dBA · Quiet
Quiet suburban street at night

6% of people above 55 dBA

QuietLoud

Northern 74851

45.4 dBA · Mostly quiet
Quiet suburban street at night

8% of people above 55 dBA

QuietLoud

Southern 74851

45.1 dBA · Mostly quiet
Quiet suburban street at night

8% of people above 55 dBA

QuietLoud

Western 74851

43.3 dBA · Quiet
Quiet suburban street at night

4% of people above 55 dBA

QuietLoud

Northern 74851 sounds about 19% louder than Eastern 74851 to the human ear, a 2.5 dBA gap. Every 10 dBA roughly doubles perceived loudness. Within any of these directions, two homes a quarter mile apart can still differ by 10 or more dBA depending on how close they sit to a major highway.

Loudest Road Corridors

The model evaluates every road in 74851 using federal traffic counts, posted speeds, heavy-truck ratios, and pavement type. The source level shown is the modeled noise at the road centerline, where it is loudest. Noise drops with distance, faster in vegetated areas and slower over open pavement.

RoadTypeAvg. source dBAPeak source dBA
I-040 Interstate 74.5 75
U177 Minor arterial 54.3 58
S102 Major collector 54.8 57
Fishmarket Rd Local 53.5 55
South Pottawatomie Rd Local 55.0 55

How far back from I-040 do you need to be?

I-040 produces an estimated 75 dBA at its loudest centerline points. Noise drops logarithmically with distance, with the exact rate depending on what's between you and the road. Tree cover, walls, terrain, and pavement type all matter. At roughly a quarter mile back, traffic fades into the noise level of a quiet suburban street at night.

At source
75 dBA
City bus interior
165 ft
63 dBA
Busy restaurant
330 ft
56 dBA
Quiet office to normal conversation
660 ft
49 dBA
Quiet office
¼ mile
42 dBA
Quiet suburban street at night
½ mile
35 dBA
Soft rainfall

Calculated from the model's calibrated attenuation formula. About 17% of 74851 sits under tree canopy (about average for zip codes) and roughly 13% is impervious surface like pavement and rooftops. Both are folded into the per-place decay rate above. Heavier canopy pulls noise down faster with distance; impervious surfaces slow the drop.

How Noise Is Distributed Across 74851

The bar chart below shows the share of 74851 residents in each noise band. About 94% of residents live below the EPA's 55 dBA threshold, and roughly 2% live in blocks above 60 dBA. Long-term exposure in that range is linked to elevated stress hormones and cardiovascular risk.

How 74851 Compares

74851 sits the lowest among the peer group. Below: how 74851's average outdoor noise and share of residents above the EPA threshold compare with 74857, 73045, 74873, and 73165.

Average noise level (dBA)

74851's 44.8 dBA pop-weighted average is the lowest among the peer group. Oklahoma as a whole averages 50.5 dBA and the U.S. averages 52.0 dBA. Both are lower than 74851 because most of either area is rural land away from major roads.

Share of residents above 55 dBA

About 7.8% of 74851 residents live in blocks where outdoor levels exceed the EPA's 55 dBA threshold. That's in the middle of its peer group. Measured by land area instead, 13.4% of 74851's footprint sits above 55 dBA, against a Oklahoma average of 22.7% and a national average of 28.1%.

What This Means if You're Moving to 74851

  • Distance from highways matters more than the neighborhood name. Two homes in the same zip code can differ by 20 dBA if one sits 100 meters from I-040 and the other 500 meters away. The model captures this at 100-meter resolution, so noise exposure changes block by block.
  • Tree canopy can help reduce modeled noise exposure. Roughly 17% of 74851 is under tree cover (about average for zip codes), and the dominant land cover is grassland. Both are measured from federal USDA Forest Service and USGS satellite imagery at 30-meter resolution. Streets with 60% or higher canopy show 3 to 5 dBA lower noise than comparable streets with bare ground or pavement, which is why the per-place decay rate above already accounts for it.

Sources & Methodology

The BestNeighborhood noise model is calibrated against nearly one million federal ground-truth measurements across four states. Road noise is computed from segment-level federal traffic data and propagated outward using physics-based acoustic decay, with attenuation rates that depend on the surrounding land cover.

Federal datasets used:

FHWA Highway Performance Monitoring System: road geometry, traffic counts, lane configuration
U.S. DoT Bureau of Transportation Statistics National Transportation Noise Map: aviation and rail noise, road calibration ground truth
USGS / MRLC National Land Cover Database: land cover and impervious surface coverage
USDA Forest Service Tree Canopy Cover: vegetation density for sound propagation
U.S. Census Bureau TIGER/Line: block-level geography and population
U.S. EPA Levels Document: 55 dBA outdoor reference level

All inputs are published federal datasets. Block-level noise is computed by combining road, rail, and aviation sound sources in the energy domain, the same physics used in professional environmental noise assessments. Read the full methodology.