Noise Levels in 85708, AZ | Find Quiet Neighborhoods With Our Sound Map
52 dBA
Average noise across 85708
Quiet office to normal conversation
775
Residents above the EPA 55 dBA threshold
29% of 85708 residents
59 dBA
Loudest residential point
Normal conversation an arm’s length away
This map shows modeled outdoor noise across 85708 at 100-meter resolution, combining road, aviation, and rail sources. Green areas measure below 45 dBA. Orange and red exceed the EPA's 55 dBA outdoor threshold linked to long-term health effects. Use the layer toggles to view each source on its own or all together.
Overall
Road
Rail
Aviation
Click the map to explore
35 dBa55 dBa (EPA limit)90+ dBa
3545557090
Quietest (dBA)Loudest
Colorblind friendlyoff
What the numbers sound like
30 dBAWhisper
40 dBASoft rainfall
45 dBAQuiet suburban street at night
50 dBAQuiet office
55 dBAEPA outdoor threshold: light traffic 100 ft away
60 dBANormal conversation an arm's length away
65 dBABusy restaurant
70 dBAHighway traffic 50 ft away
80 dBACity bus interior
Population Above the EPA Outdoor Threshold
The EPA's 55 dBA outdoor reference level is a common benchmark for residential noise exposure, especially for activity interference, annoyance, and long-term community noise concerns. About 775 85708 residents, or 28.6%, live above that level. By land area, 28.1% of 85708 is above 55 dBA.
Average noise levels for 85708 residents, grouped by direction from the center of 85708. Northern 85708 carries the highest population-weighted average; Eastern 85708 carries the lowest. Just 0% of residents in Eastern 85708 live in blocks above the EPA's 55 dBA threshold, a fifth of the share in Northern 85708.
Central 85708
51.8 dBA · Moderate
Quiet office to normal conversation
36% of people above 55 dBA
QuietLoud
Eastern 85708
49.5 dBA · Mostly quiet
Quiet office
0% of people above 55 dBA
QuietLoud
Northern 85708
52.6 dBA · Moderate
Quiet office to normal conversation
28% of people above 55 dBA
QuietLoud
Southern 85708
52.5 dBA · Moderate
Quiet office to normal conversation
26% of people above 55 dBA
QuietLoud
Western 85708
51.0 dBA · Moderate
Quiet office
14% of people above 55 dBA
QuietLoud
Northern 85708 sounds about 24% louder than Eastern 85708 to the human ear, a 3.1 dBA gap. Every 10 dBA roughly doubles perceived loudness. Within any of these directions, two homes a quarter mile apart can still differ by 10 or more dBA depending on how close they sit to a major highway.
How far back from do you need to be?
produces an estimated 59 dBA at its loudest centerline points. Noise drops logarithmically with distance, with the exact rate depending on what's between you and the road. Tree cover, walls, terrain, and pavement type all matter. At roughly a quarter mile back, traffic fades into the noise level of a soft rainfall.
At source
59 dBA
Normal conversation an arm’s length away
165 ft
44 dBA
Quiet suburban street at night
330 ft
36 dBA
Soft rainfall
660 ft
35 dBA
Soft rainfall
¼ mile
35 dBA
Soft rainfall
½ mile
35 dBA
Soft rainfall
Calculated from the model's calibrated attenuation formula. About 0% of 85708 sits under tree canopy (much lighter than most zip codes) and roughly 35% is impervious surface like pavement and rooftops. Both are folded into the per-place decay rate above. Heavier canopy pulls noise down faster with distance; impervious surfaces slow the drop.
-->
Airport Noise
Tucson International (TUS) sits southwest of 85708. The U.S. Department of Transportation models aviation noise around this airport from federal traffic data, and the model uses those federal measurements rather than synthetic predictions.
Blocks under the approach and departure paths carry combined road-plus-aviation noise, with some exceeding 55 dBA on the map's Overall layer. Blocks on the opposite side of 85708, particularly to the northeast, show no measurable aviation contribution. Use the Aviation toggle on the map above to isolate the airport's footprint.
How Noise Is Distributed Across 85708
The bar chart below shows the share of 85708 residents in each noise band. About 86% of residents live below the EPA's 55 dBA threshold, and roughly 0% live in blocks above 60 dBA. Long-term exposure in that range is linked to elevated stress hormones and cardiovascular risk.
How 85708 Compares
85708 sits at the louder end of the spectrum. Below: how 85708's average outdoor noise and share of residents above the EPA threshold compare with 85701, 85707, 85631, and 85736.
Average noise level (dBA)
85708's 51.9 dBA pop-weighted average is at the louder end of the spectrum. Arizona as a whole averages 53.0 dBA and the U.S. averages 52.0 dBA. Both are lower than 85708 because most of either area is rural land away from major roads.
Share of residents above 55 dBA
About 28.6% of 85708 residents live in blocks where outdoor levels exceed the EPA's 55 dBA threshold. That's in the middle of its peer group. Measured by land area instead, 28.1% of 85708's footprint sits above 55 dBA, against a Arizona average of 28.3% and a national average of 28.1%.
What This Means if You're Moving to 85708
Distance from highways matters more than the neighborhood name. Two homes in the same zip code can differ by 20 dBA if one sits 100 meters from and the other 500 meters away. The model captures this at 100-meter resolution, so noise exposure changes block by block.
Tree canopy can help reduce modeled noise exposure. Roughly 0% of 85708 is under tree cover (much lighter than most zip codes), and the dominant land cover is low-intensity developed land. Both are measured from federal USDA Forest Service and USGS satellite imagery at 30-meter resolution. Streets with 60% or higher canopy show 3 to 5 dBA lower noise than comparable streets with bare ground or pavement, which is why the per-place decay rate above already accounts for it.
Airport noise is directional. Tucson International's approach paths concentrate aviation noise to the southwest. Neighborhoods to the northeast of downtown show no measurable contribution from the airport.
Sources & Methodology
The BestNeighborhood noise model is calibrated against nearly one million federal ground-truth measurements across four states. Road noise is computed from segment-level federal traffic data and propagated outward using physics-based acoustic decay, with attenuation rates that depend on the surrounding land cover.
All inputs are published federal datasets. Block-level noise is computed by combining road, rail, and aviation sound sources in the energy domain, the same physics used in professional environmental noise assessments. Read the full methodology.
